SMS:Recompute All Stations: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 1: Line 1:
{{Going Away}} [[Category:Archived]]
This function can be used if an arc's "Computational Length" value on a river  changes.  It sets the Start and End station values for each of the arcs with the  same river name based on the computational lengths of each arc.  So, for  example, if there are three arcs in a river, the most downstream arc being 30 feet,  the next arc being 40 feet, and the next arc being 50 feet, the starting and  ending stations would be as follows for each of the arcs:
This function can be used if an arc's "Computational Length" value on a river  changes.  It sets the Start and End station values for each of the arcs with the  same river name based on the computational lengths of each arc.  So, for  example, if there are three arcs in a river, the most downstream arc being 30 feet,  the next arc being 40 feet, and the next arc being 50 feet, the starting and  ending stations would be as follows for each of the arcs:



Revision as of 18:17, 13 July 2016

This function can be used if an arc's "Computational Length" value on a river changes. It sets the Start and End station values for each of the arcs with the same river name based on the computational lengths of each arc. So, for example, if there are three arcs in a river, the most downstream arc being 30 feet, the next arc being 40 feet, and the next arc being 50 feet, the starting and ending stations would be as follows for each of the arcs:

Arc Start Station End Station
1 (downstream) 0.0 30.0
2 30.0 70.0
3 70.0 120.0

These start and end stations are set when assigning a river name to an arc, so the Recompute All Stations command should usually not be needed unless there is a change to the computational length, start station, or end station values for a centerline arc.

Related Topics