SMS:Recompute All Stations: Difference between revisions
From XMS Wiki
Jump to navigationJump to search
No edit summary |
No edit summary |
||
| Line 11: | Line 11: | ||
|} | |} | ||
These start and end stations are set when assigning a river name to an arc, so the ''' | These start and end stations are set when assigning a river name to an arc, so the '''Recompute All Stations''' command should usually not be needed unless there is a change to the computational length, start station, or end station values for a centerline arc. | ||
==Related Topics== | ==Related Topics== | ||
Revision as of 18:04, 23 October 2014
This function can be used if an arc's "Computational Length" value on a river changes. It sets the Start and End station values for each of the arcs with the same river name based on the computational lengths of each arc. So, for example, if there are three arcs in a river, the most downstream arc being 30 feet, the next arc being 40 feet, and the next arc being 50 feet, the starting and ending stations would be as follows for each of the arcs:
| Arc | Start Station | End Station |
| 1 (downstream) | 0.0 | 30.0 |
| 2 | 30.0 | 70.0 |
| 3 | 70.0 | 120.0 |
These start and end stations are set when assigning a river name to an arc, so the Recompute All Stations command should usually not be needed unless there is a change to the computational length, start station, or end station values for a centerline arc.
Related Topics
SMS – Surface-water Modeling System | ||
|---|---|---|
| Modules: | 1D Grid • Cartesian Grid • Curvilinear Grid • GIS • Map • Mesh • Particle • Quadtree • Raster • Scatter • UGrid |  |
| General Models: | 3D Structure • FVCOM • Generic • PTM | |
| Coastal Models: | ADCIRC • BOUSS-2D • CGWAVE • CMS-Flow • CMS-Wave • GenCade • STWAVE • WAM | |
| Riverine/Estuarine Models: | AdH • HEC-RAS • HYDRO AS-2D • RMA2 • RMA4 • SRH-2D • TUFLOW • TUFLOW FV | |
| Aquaveo • SMS Tutorials • SMS Workflows | ||
