SMS:SRH-2D Structures: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 11: Line 11:
Specific guidelines include:
Specific guidelines include:
* The user must specify a file (path and name) where all HY-8 crossing definitions used in this boundary condition coverage are stored.  This is accessed by right-clicking on the coverage and selecting HY-8 '''Options'''.
* The user must specify a file (path and name) where all HY-8 crossing definitions used in this boundary condition coverage are stored.  This is accessed by right-clicking on the coverage and selecting HY-8 '''Options'''.
* The user must define the crossing before running SRH-2D.  The crossing definition can be accessed in the boundary condition dialog after assigning the arcs to be a culvert.
* The user must define the crossing before running SRH-2D.  This is done by creating two arcs representing the upstream and downstream portion of the culvert then assigning the arcs the "Culvert" ''Type'' in the ''Linear BC'' dialog. The crossing definition can be accessed in the boundary condition dialog after assigning the arcs to be a culvert.
* HY-8 computes flow both through the culvert and over the road/weir above the culvert.  Attributes are specified in the crossing definition.
* HY-8 computes flow both through the culvert and over the road/weir above the culvert.  Attributes are specified in the crossing definition.
In the boundary conditions for culvert arcs include:
*Object ''Role''. Can be either "culvert upstream" or "culvert downstream"
*''Units for HY-8 Display''
*'''Launch HY-8'''


==Gate==
==Gate==

Revision as of 17:19, 17 September 2015

SRH-2D has the capability to model hydraulic structures including: bridges, culverts, gates, and weirs.

The structure boundary conditions were added to the SRH-2D model at the request of FHWA in 2015 and included in the interface for SMS 12.0. General structure requirements include:

  • Each structure is specified by selecting two arcs which represent the upstream and downstream faces of the structure.
  • The two arcs must be ordered in the same direction (i.e. left to right as looking downstream). If this is not the case, model results are will not represent the structure.
  • In the region of structures that represent one dimensional flow (Weir, Culvert, Gate) the two dimensional flow is disabled. SRH-2D will identify cells/elements enclosed by the upstream and downstream structure definitions (connecting the end points of the arcs/nodestrings) and disable the elements. In order to make the display in SMS match what the model is doing, the user will generally create this polygon in the material coverage and assign the area to the disabled material type.

Culvert

A small culvert under a pedestrian walkway.

A structure that allows water to flow under a road, railroad, trail, or similar obstruction. SRH-2D can make use of culvert structures by coupling with the Federal Highway Administrations HY-8 culvert analysis application.

Specific guidelines include:

  • The user must specify a file (path and name) where all HY-8 crossing definitions used in this boundary condition coverage are stored. This is accessed by right-clicking on the coverage and selecting HY-8 Options.
  • The user must define the crossing before running SRH-2D. This is done by creating two arcs representing the upstream and downstream portion of the culvert then assigning the arcs the "Culvert" Type in the Linear BC dialog. The crossing definition can be accessed in the boundary condition dialog after assigning the arcs to be a culvert.
  • HY-8 computes flow both through the culvert and over the road/weir above the culvert. Attributes are specified in the crossing definition.

In the boundary conditions for culvert arcs include:

  • Object Role. Can be either "culvert upstream" or "culvert downstream"
  • Units for HY-8 Display
  • Launch HY-8

Gate

Gate structures can simulate both overflow and underflow gates.

Obstructions

Obstructions, such as bank protrusions and boulder clusters, can be represented using feature objects. Obstructions can be assigned to feature arcs or points on the Obstructions Coverage.

Pressure Flow Bridge

A bridge can be represented as a pressure flow boundary condition in SMS.

  • The pressure zone definition defines a ceiling elevation that can vary linearly from the upstream arc to the downstream arc. This could also be side to side if the arcs are defined as the sides of the bridge instead of upstream/downstream. More complex ceiling elevation variation can be simulated using multiple pairs of pressure flow arcs.
  • The pressure zone cannot touch any mesh/grid boundaries nor can voids in the mesh be defined in the pressure zone.
  • Pressure zones do not allow any overtopping.

Weir

The weir at Coburg Lake in Victoria (Australia) after heavy rainfall.

A barrier across a river designed to alter its flow characteristics. In SMS, a weir can be represented as two arcs. One arc represents the upstream face of the weir structure and the other represents the downstream face of the weir.

Typically a weir would be represented in the geometry of the mesh/grid. One application of the weir structure would be to quickly investigate the impact of inserting a weir with a variety of crest elevations (designing the structure). In this case, the same grid/mesh could be used for all simulations.

Related Topics