User:Jcreer/SMS:3D Bridge: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 28: Line 28:


==Bridge Dialog==
==Bridge Dialog==
The ''Bridge'' dialog is reached by right-clicking on a bridge component and selecting the '''Edit Bridge''' command. The dialog contains the following options:
*'''Swap Arcs'''
*'''Export 3D Bridge'''
*''Top Profile''
**'''Edit'''
*''Upstream Profile''
**'''Edit'''
*''Downstream Profile''
**'''Edit'''


{{Navbox SMS}}
{{Navbox SMS}}
[[Category:SMS General Information]]
[[Category:SMS General Information]]

Revision as of 20:29, 21 August 2019

3D bridge example

A 3D bridge can be modeled on an existing model using components. To model a 3D bridge, the following is needed:

  • Area Property coverage
  • Two arcs on the Area Property coverage defining the upstream and downstream sides of the bridge
  • Top, upstream, and downstream profiles

Also, having an existing mesh, scatter set, or grid of the site is typically helpful.

To build a 3D bridge, do the following:

  1. Create an Area Property coverage.
  2. Create arcs representing the upstream and downstream side of the bridge location.
  3. Right-click in the Project Explorer and select New General Component | Bridge.
  4. Link the Area Property Coverage to the component in the Project Explorer.
  5. Right-click on the component item and select Edit Bridge.
  6. In the Bridge dialog, define the top profile, upstream profile, and downstream profile.
  7. Export the 3D bridge and save out the XMUGRID file.
  8. Import the XMUGRID file.

3D Bridge Modeling Tips

  • The first arc drawn on the Area Properties coverage will be made the upstream arc by default. Use the Swap Arcs button in the Bridge dialog to change this.
  • The bridge will use the same units as set in the project's projection.
  • Multiple bridges can be modeled by creating addition components.
  • When exporting the bridge, the XMUGRID file is created as well as a PRJ file containing the bridge's projection. These files should be kept together.

Components

Bridge Dialog

The Bridge dialog is reached by right-clicking on a bridge component and selecting the Edit Bridge command. The dialog contains the following options:

  • Swap Arcs
  • Export 3D Bridge
  • Top Profile
    • Edit
  • Upstream Profile
    • Edit
  • Downstream Profile
    • Edit