User:Jcreer/TUFLOW FV for SMS 13.2

From XMS Wiki
Jump to navigationJump to search
TUFLOW FV
Model Info
Model type Two-dimensional (2D) flexible mesh finite volume flood, tide and water quality simulation software.
Developer WBM BMT WBM (Australia)
Web site www.tuflow.com
Tutorials SMS Learning Center

TUFLOW FV (which stands for Two-dimensional Unsteady FLOW Finite Volume) is a flexible mesh finite volume numerical model that simulates hydrodynamic, sediment transport and water quality processes in oceans, coastal waters, estuaries and rivers. The model may be used for coastal and nearshore environments including beaches and coastlines as well as offshore environments such as estuaries, river entrances and deltas, and floodplains. Uses include modeling river flood flow, tsunami inundation (the finite-volume scheme is well suited for a tsunami's mixed sub/super-critical flow regimes), beach erosion, ocean pollution, and estuary flow.

Unlike the fixed square grids of TUFLOW Classic, the flexible triangular or quadrilateral mesh of TUFLOW FV allows users to modify mesh resolution spatially, seamlessly increasing the model resolution in areas of interest. This modelling approach reduces the number of computation cells needed in a model reducing run times. Additionally, TUFLOW FV can be run in parallel on multiple processors, threads, or computers.

The TUFLOW FV model can be added to a paid edition of SMS.

TUFLOW FV ENGINE

The TUFLOW computational engine computes 2D hydraulic solutions. The engine uses a macro style text-file input which allows the user to flexibly and efficiently control model configurations and simulations.

For more information see the TUFLOW FV webpage.

SMS Interface

The TUFLOW FV engine is interfaced in SMS through the generic model interface.

TUFLOW FV Coverages

TUFLOW FV simulations require a boundary condition coverage and a materials coverage.

Boundary Conditions Coverage

The TUFLOW FV Assign Boundary Condition dialog

The TUFLOW FV boundary conditions coverage allows assigning boundary condition attributes to arcs drawn in the coverage. These attributes will then be assigned, or snapped, to the 2D mesh during the simulation run.

Attributes are assigned to arcs by right-clicking a selected arc and selecting the Assign BC command. This will open the Assign Boundary Condition dialog for TUFLOW FV.

The TUFLOW FV Assign Boundary Condition dialog has the following options:

BC Options – The BC Options tab has options for assigning attributes to the arc.

  • Type – The option here determines what type of boundary condition will be assigned to the arc. The following types are available:
    • "Monitor" – Sets the arc to be a monitoring line.
    • "HQ (Head Discharge)" –
    • "Q (Nodestring Flow)"
    • "QN (Head Discharge)"
    • "WL (Water Level)"
    • "WLS (Sloping Water Level"
    • "WL_CURT (Water Level Curtain"
    • "ZG (Zero Gradient)"
  • Subtype
  • Define Curve
  • Friction slope
  • Dataset file
  • Define Varaibles
  • View Curve
  • Define default
    • 'Q default
  • Define offset
    • Q offset
  • Define scale
    • Q scale
  • Define update increment
    • Time
  • Include mean sea level pressure

Materials

The TUFLOW FV materials coverage allows creating the polygons to hold the material attributes for the simulation run. The assigned material attributes will be mapped to the mesh/grid during the simulation run.

TUFLOW FV Simulation Menu

The TUFLOW FV simulation item in the Project Explorer contains a right-click menu with commands for accessing TUFLOW FV simulation options. The menu has the following commands:

  • Simulation Run Queue – Opens the Simulation Run Queue dialog.
  • Model Control – Opens the TUFLOWFV Model Control dialog.
  • Save Simulation – Saves the simulations and exports the simulations files needed for the simulation run.
  • Run Simulation – Runs the simulation using the exported simulation files. will bring up the Simulation Run Queue dialog.
  • Save Project, Simulation and Run – Exports the simulation files, saves the project and project files, and runs the simulation. Will bring up the Simulation Run Queue dialog.
  • Read Solution – Opens a browser to import the solution files.
  • Simulation Properties – Opens the Simulation Propertes dialog where basic information about the simulation can be viewed.

The specific menu commands may be different depending on the selected option in the Preferences dialog.

TUFLOW FV Model Control

The TUFLOW FV Model Control dialog contains options for setting the parameters that will be used during the simulation run. The dialog is accessed by right-clicking on the simulation in the Project Explorer and selecting the Model Control command. The dialog contains multiple options organized on multiple tables. The options are as follows:

General

The General tab of the TUFLOW FV Model Control dialog

The General tab of the TUFLOW FV Model Control dialog contains the following options:

  • Define spatial order – (Option to define horizontal spatial scheme??)
    • Horizontal – Select "1st" order scheme or "2nd" order scheme.
  • Define display interval – (Does it have something to do with the output interval. Time steps???)
    • Display interval
  • Define hardware solver – Option to enable computing through the CPU or the GPU. Can produce slight differences in results.
    • "CPU" – Calculations will use the "Central Processing Unit".
    • "GPU" – Calculations will use the "Graphical Processing Unit". Using GPU with TUFLOW
      • Device ID – Option to select which GPU device is used for computers or GPUs with multiple CUDA enabled GPU cards.
  • Warn on projection mismatch of GIS inputs – (Sets the program to warn if GIS inputs are not all in the same projection??)
  • Tutorial model – (Allows simulation of the TUFLOW Tutorial Models without the need for a TUFLOW license.??)


Time

The Time tab of the TUFLOW FV Model Control dialog

The Time tab of the TUFLOW FV Model Control dialog contains the following options:

  • Simulation time
    • Use ISODate – Option to use ISODate format which requires data be input in the form dd/mm/yyyy HH:MM:SS. If left off, default time format is hours.
    • Reference time – Will set simulation reference time. Times set for starting and ending have reference to this time. This can affect output times when processing and visualizing results from certain programs.
    • Starting time – Will set simulation start time.
    • Ending time – Will set simulation end time.
  • Time step limits
    • CFL – Sets the Courant-Friedrichs-Lewy condition. ((This is a control number that gives the model...???)). Can be no larger than one since this is the theoretical stability limit. Often, inputting a value lower than one ensures greater model stability.
    • Min time step(s) – ""Specifies minimum variable timestep allowed according to CFL stability criterion""
    • Max time step(s) – ""Specifies maximum variable timestep allowed according to CFL stability criterion""


Global parameters

The Global parameters tab of the TUFLOW FV Model Control dialog

The Global parameters tab of the TUFLOW FV Model Control dialog contains the following options:

  • Define bottom drag model – Option to specify bottom drag model for the simulation. The bottom drag model will be used to describe ((bed boundary resistance??)) in the simulation.
    • Method – Option to set bottom drag model to use "Manning" or "KS".
      • "Manning" – Uses the Manning model and requires a Manning's n coefficient
        • Manning's n coefficient – Sets the Manning's n coefficient.
      • "KS" – ""Assumes a log-law velocity profile and requires specification of a surface roughness length-scale. Requires "ks" values be set.""
        • Nikuradse roughness – Sets the Nikuradse roughness for the bottom drag model.
  • Horizontal mixing model – ((??Possible Scalar mixing model)) ((Momentum mixing model...?)) Defines horizontal mixing eddy viscosity calculation according to options in drop-down menu.
    • "None" – Will not represent horizontal momentum mixing.
    • "Constant" – Option to globally define a specific constant eddy viscosity (ft2/s).
      • Global horizontal eddy viscosity – Specifies the constant eddy viscosity ((for the entire simulation??).
    • "Smagorinsky" – The horizontal eddy viscosity will be calculated according to the Smagorinsky model which sets the diffusivity proportional to the local strain rate. Requires specification of global horizontal eddy viscosity coefficient.
      • Global horizontal eddy viscosity coefficient – Sets the Smagorinsky coefficient for the horizontal mixing eddy viscosity calculation.
      • Define global horizontal eddy viscosity limits – Sets globally ((for the entire simulation??) the limits for the horizontal eddy viscosity ((values??)). Only for use with Smagorinsky or Wu models.
        • Minimum eddy viscosity – Sets the minimum horizontal eddy viscosity in ft2/s.
        • Maximum eddy viscosity – Sets the maximum horizontal eddy viscosity in ft2/s.
    • "Wu" – The horizontal eddy viscosity will be calculated according to the Wu model. Requires specification of global horizontal eddy viscosity coefficient. ((Seems to be a wind stress model. Can't figure out what it has to do with the Horizontal Mixing model did it get included here by accident??))
      • Global horizontal eddy viscosity – Sets the Wu coefficient for the horizontal mixing eddy viscosity calculation.
      • Define global horizontal eddy viscosity limits – Sets globally ((for the entire simulation??) the limits for the horizontal eddy viscosity ((values??)). Only for use with Smagorinsky or Wu models.
        • Minimum eddy viscosity – Sets the minimum horizontal eddy viscosity in ft2/s.
        • Maximum eddy viscosity – Sets the maximum horizontal eddy viscosity in ft2/s.
  • Define stability limits – Option to define the maximum acceptable values relevant for the model. If water level or velocity exceed the given values, the model will stop computations and give an error. This feature helps to identify a model with instabilities by recognizing unrealistic values that the model produces. Small anomalies and acceptable spikes in data values will not stop computations.
    • Maximum water level – Sets maximum acceptable water level for the model.
    • Maximum velocity – Sets maximum acceptable velocity for the model.


Wind stress

The Wind stress tab of the TUFLOW FV Model Control dialog

The Wind stress tab of the TUFLOW FV Model Control dialog contains the following options:

  • Define wind model – Option to define the model used in calculating wind stress for any wind inputs in the simulation.
    • Model – Drop-down menu with options for models that can be used to calculate wind stress.
      • Wu – Sets the wind stress model to the Wu model. Scales wind stress parameterisation based on wind speed.
      • Constant – Applies wind stress parameterisation using Bulk momentum transfer coefficient as in pre-2019 builds of TUFLOW.
      • Kondo – Applies a scaling factor ((for the wind stress parameters??)) using a single term.
  • Define wind parameters – ((Sets the ((??Wind Drag Coefficients)) parameters that the selected model will use to scale the wind stress parameterisation??))
    • Wa – ((??Wind speed in feet per second))
    • Ca –
    • Wb –
    • Cb –
    • Bulk momentum transfer coefficient – sets the coefficient for the Constant wind stress model.
    • Scale factor – Sets the scaling factor for the Kondo wind stress model.


Geometry

The Geometry tab of the TUFLOW FV Model Control dialog

The Geometry tab of the TUFLOW FV Model Control dialog contains the following options:

  • Define global bed elevation limits – Option to apply bed elevation limits ((to the entire model??)). This truncates the bathymetry to be within certain values. Bed elevations in the model that are outside the set limits will be set to the minimum or the maximum. INCLUDE??""This is commonly used to sensitivity test limits, or to enforce wet elements where coarse mesh resolution has resulted in spurious wetting/drying areas. ""
    • Bed elevation minimum – Defines minimum bed elevation. ((Bed Elevations??Maybe just elevations)) in the model below this value will be set to this value.
    • Bed elevation maximum – Defines maximum bed elevations. ((Bed Elevations??Maybe just elevations)) in the model above this value will be set to this value.
  • Define cell wet/dry depths – Sets the depth limits that define certain attributes of cells in the model.
    • Dry depth – Sets a minimum depth value below which the simulation drops a cell from ((computations/calculations??), ((being considered "dry"))
    • Wet depth – Sets a minimum depth value below which the simulation sets a cell's momentum to zero ""to avoid unphysical velocities at very low depths""
  • Z modifications – ((Options for adjusting elevation data??))
    • Add Row pi Adds a row of elevation data to the Z modifications table.
    • Delete Row pi Deletes the selected row of elevation data from the Z modifications table.
    • Move up pi Moves the selected row of elevation data to be above the row immediately above it.
    • Move down pi Moves the selected row of elevation data to be below the row immediately below it.
    • Type – Option to select which type of elevation input is desired on this row of data.

(( **Set Zpts – ((Sets elevation values for the center of the cells to the given value.??))

    • GRID Zpts – Interpolates a grid file to set mesh cell center elevations. Select (none selected) to open a dialog box and select the desired grid file. Either .asc or .flt. can be used for this feature.
    • CSV File – Option to update cell elevations using a .csv file. The .csv file can identify cells using x,y coordinates or cell IDs.
    • CSV Type – Select which type of data the .csv file will contain.
      • Cell ID – Sets the program to read the .csv file data for cell IDs matched with elevation data.
      • Coordinate – Sets the program to read the .csv file data for x,y coordinates matched with elevation data.
    • ZLine Shapes – Sets breakline features and polygon features according to an already imported .shp or ((.mif/.mid??)) file. Select (none selected) to open a dialog and select the desired file.
    • ZPoint Shapes – Sets elevation points according to an already imported .shp or ((.mif/.mid)) file. Select (none selected) to open a dialog and select the desired file. ??))


Initial conditions

The Initial conditions tab of the TUFLOW FV Model Control dialog

The Initial conditions tab of the TUFLOW FV Model Control dialog contains the following options:

  • Define initial water level – Option set water level to a constant value for the entire simulation. It's best for the water level boundary conditions for the initial timesteps to be as close as possible to this setting.
  • Use restart file – Option to use a restart file to define ((the initial conditions??)) for the current run. Restart files will only function for models with the ""same mesh, bathymetry, vertical layering, and number of conserved variables"".
    • Select... – Opens dialog box for selecting restart file to be used.
    • Use restart file time – Option to use the time stamp on the restart file as the starting time of the current run. On by default.


Output

The Output tab of the TUFLOW FV Model Control dialog contains the following options:

  • Output blocks – ""Output blocks specify the type of output and the output properties including the desired parameters and time definitions""
    • pi Add Row – Adds a output block to the Output blocks table.
    • pi Delete Row – Deletes the selected output block from the Output blocks table.
    • "DATV" – ((SMS will give mapped output in DATV format with user specified datasets and parameters. Often used for data visualization in SMS.??))
    • "XMDF" – ((SMS will give mapped output in XMDF format with user specified datasets and parameters. OFten used for data visualization in SMS.??))
    • "NetCDF" – ((SMS will give mapped output in NetCDF (network Common Data Form) format with user specified datasets and parameters. Includes information about the model geometry, mapped output, and the specified time interval ??))
    • "Flux" – Outputs a CSV file ""with flux across all model nodestrings."" This information might be used to check rates of fluid and other ""simulated quantities that enter or exit the model boundaries or cross user specified nodestrings in the model domain. In SMS, I don't know how to define other simulated quantities.
    • "Mass" – Outputs a CSV file that can be used to check certain simulated quantities, mainly the volume of fluid within the model domain.
    • "Points" – Outputs a CSV file containing model parameter time-series. This includes coordinates and associated data for the points of interest ((as defined in a coverage dedicated to this task.??))
    • "Transport" – Outputs a NetCDF file ""with conserved variables stored on the TUFLOW FV mesh to be used in subsequent advection-diffusion, sediment, or particle tracking simulations."" This file is a special type of boundary condition used to improve runtimes for those simulations.
  • Output block options - Row (value of active row) – Gives options to define attributes and datasets for a selected output block. Many options are only available when certain output blocks are selected. (See table below)
    • Output points feature coverage – Only available when a "Points" output block is active. Click Select... to set the coverage that will define the coordinates of the desired output points
    • Define Interval – Option to set the interval for the specified output in seconds. If not specified, the program will produce the specified output at every timestep, sometimes resulting in output files that are too large.
    • Define start time – Sets output request start time. When not specified, the output start time will be the simulation start time. Time format will be the same as format selected under the Time tab.
    • Define final time – Sets output request final time. When not specified, the output final time will be the simulation end time. Time format will be the same as format selected under the Time tab.
    • Define compression – ((Option to compress output file. Potentially useful for large models or tight storage space.??))
      • Compression on – If turned on, output file will be compressed. On by default.
    • Define Statistics – Option to track minimum and/or maximum values of selected datasets ((call them model parameters??)).
      • Type – Select the values to track from the drop-down menu.
        • "Both" – Both maximum and minimum values for selected datasets will be tracked.
        • "Minimums" – Only minimum values for selected datasets will be tracked.
        • "Maximums" – Only maximum values for selected datasets will be tracked.
      • Define statistics dt – Option to define independent output interval for tracking of minimum and maximum values. If not defined, defaults to 0 and uses the model interval.
    • Filename suffix – ((Option to specify a desired suffix for output file.??))
    • Datasets – ((Specify datasets for inclusion in output file.??)) This will only appear when a DATV, XMDF, NetCDF, or points output block is active. For more information, see the table below.
  • Directories
    • Log directory – Option to specify ((directory??)) for simulation log file (.log) output. When not specified, log file will be written to same location as simulation control file.
    • Output directory – Option to specify location in which simulation output files will be written. When not specified, output files will be written to same location as simulation control file.
    • Write restart file – ((??Couldn't find command instructions?? Option to write restart file for the current simulation. "This will save current values of the selected datasets in each cell at regular timesteps". Specify these timesteps in Write restart dt.
      • Write restart dt – Specify the desired interval of timesteps at which TUFLOW FV will write the restart file.
      • Enable restart overwrite – Option to overwrite the restart file being used at the time interval specified in Write restart dt. On by default.
    • Write check files – Option to create a number of check files that can be used to verify model inputs.
      • Check files directory
    • Write empty GIS files – Option to automatically create GIS template files in .mid/.mif or .shp format with recommended GIS naming conventions that "contain the correct GIS attributes".
      • Template files directory – Sets the location in which the empty GIS files will be written.


Category Output Block Options Output blocks that use this option

General
Output points feature coverage Points
Define interval DATV, XMDF, NetCDF, Flux, Mass, Points, Transport
Define start time DATV, XMDF, NetCDF, Flux, Mass, Points, Transport
Define final time DATV, XMDF, NetCDF, Flux, Mass, Points, Transport
Define compression XMDF, NetCDF
Define statistics DATV, XMDF, NetCDF, Flux, Mass, Points, Transport
Filename suffix DATV, XMDF, NetCDF, Flux, Mass, Points, Transport

Datasets Water depth DATV, XMDF, NetCDF, Points
Water surface elevation DATV, XMDF, NetCDF, Points
Bed shear stress DATV, XMDF, NetCDF, Points
Surface shear stress DATV, XMDF, NetCDF, Points
Velocity vector and magnitude DATV, XMDF, NetCDF, Points
Velocity magnitude only DATV, XMDF, NetCDF, Points
Bed elevation DATV, XMDF, NetCDF, Points
Turbulent viscosity DATV, XMDF, NetCDF, Points
Evaporation rate DATV, XMDF, NetCDF, Points
Flood hazard category based on the Australian NSW Flood plain management Manual (NSWG, 2005) DATV, XMDF, NetCDF, Points
Flood hazard category as outlined by Australian Emergency Management Institute in 2014 DATV, XMDF, NetCDF, Points
Hazard categories for the Queensland Reconstruction Authority DATV, XMDF, NetCDF, Points
Mean sea level pressure DATV, XMDF, NetCDF, Points
Downward short-wave radiation flux DATV, XMDF, NetCDF, Points
Temperatre DATV, XMDF, NetCDF, Points
10 m wind speed vector DATV, XMDF, NetCDF, Points
Wave height – typically significant wave height DATV, XMDF, NetCDF, Points
Wave period – typically peak wave period DATV, XMDF, NetCDF, Points
Wave direction DATV, XMDF, NetCDF, Points
Wave stress vector DATV, XMDF, NetCDF, Points
Source Stuff

Datv (recommended for visualisation in SMS and QGIS). • XMDF (recommended for visualisation in SMS and QGIS). • Flux (time series of fluxes across all nodestrings, refer Section 17.5). • Mass (time series mass in model refer Section 17.5). • NetCDF (cell centred 2D and 3D output, used heavily for 3D model visualisation, refer Section 17.6.4). • Points (time series outputs, refer Section 17.3). • Transport (TUFLOW FV file used for decoupling hydrodynamics from following advection dispersion, sediment or water quality simulations, refer Section 15.8).


The TUFLOW FV ‘DATV’ or ‘XMDF’ options provide output on the mesh nodes at the specified output time interval.

The TUFLOW FV 2D ‘points’ option provides model parameter time-series at point locations, each defined by a x, y coordinate specified within an output points file.

A file containing the conserved variables stored on the TUFLOW FV mesh to be used in a subsequent advection-diffusion, sediment or particle tracking simulation. Outputs a NetCDF file with conserved variables stored on the TUFLOW FV mesh to be used in subsequent simulations.

Materials

The Materials tab of the TUFLOW FV Model Control dialog

The Materials tab of the TUFLOW FV Model Control dialog contains the following options:

  • Define default material (set mat) – ((??""Sets the material ID at all cells in the model domain."" This material and its attributes will be the assumed material for each cell ((unless a material block defines them otherwise??))
    • Override Bottom Roughness
    • Bottom Roughness
    • Advanced Options – Select Advanced... to open the Materials (advanced) - Default material (set mat) dialog.
Materials (advanced) - Default material (set mat)
  • Define horizontal eddy viscosity
    • Horizontal eddy viscosity
  • Define bed elevations limits
    • Minimum bed elevation
    • Maximum bed elevation
  • Spatial reconstruction


Boundary Conditions

The Boundary conditions tab of the TUFLOW FV Model Control dialog contains the following options:

  • Define BC default update dt – Option to set the timestep for all boundary conditions to update. If unspecified, TUFLOW FV will interpolate values to each timestep. If specified, TUFLOW FV will keep all values after one update but before the next update at a constant value.
    • BC default update dt – ((sets the time value of the timesteps that TUFLOW FV will interpolate to??))
  • Run in transport mode – Option to run a simulation that includes a transport boundary condition. Transport files are a special kind of boundary coniditon which is a spe ""Any simulation that uses a transport bc""
    • Transport BC file – Click Select... to set which transport file will be used in this simulation.
  • Global boundaries – ((Boundary condition blocks that can be used to apply conditions to every cell in the model domain. For example, it can be used to account for inflow from rain or evaporation.
    • piAdd row – Adds a boundary condition block that specifies conditions over the entire model domain.
    • piDelete row – Deletes the active ((global??)) boundary condition block.
    • Type – Shows the type of boundary condition assigned to this boundary condition block.
    • Attributes
      • Assign BC – Opens the Assign Global Boundary Condition dialog.
  • Gridded boundaries – So are we applying multiple boundary conditions to the one grid? That's what's happening here??
    • piAdd row – (Adds a Gridded BC row to the Gridded boundaries table??). Opens the Define BC Grid dialog.
    • piDelete row – Deletes a Gridded BC row from the Gridded boundaries table.??
    • Grid Definition
      • Define Grid... – Opens Define BC Grid dialog for selecting the grid and associated settings for selected grid definition block.
    • Boundaries
      • Define BCs... – Opens Add Gridded BCs dialog.
  • Global wave options
    • Include wave stress
    • Include Stokes drift – Option to include Stokes drift in calculations ((Interpolates mass transport for cells between the deepwater and surfzone depth??))
Assign Global Boundary Condition
  • Options
    • Type – Sets which type of boundary condition to set globally for the model. (Depending on future plans, we could do this as another table to organize this information.)
      • "QG (Global Cell Inflow)" – Sets boundary condition as flow into every cell in model domain. Useful to account for effects of rain or evaporation.
    • Subtype – Option to adjust how a boundary type functions numerically in the model. The nature of sub-types in TUFLOW FV normally varies depending on the type selected.
      • "Sub-type 1" –
      • "Sub-type 2" –
    • Define Curve... – Opens "BC Curve Editor" dialog.
    • Define default
      • Q/A default
    • Define offset
      • Q/A offset
    • Define scale
      • Q/A scale
    • Define update increment
      • Time
    • Includes mean sea level pressure
BC Curve Editor
  • Define reference time
    • Use ISODate
    • Reference time
  • Number of rows
  • Time Units
  • Import...
  • Time
  • Q/A
  • Pan Tool.svgPan
Define BC Grid
  • Grid Definition – Space for defining the location, filename, and settings for a NetCDF file that will be used to map input files to the model mesh.
    • File – Click Select... to set the NetCDF file that contains the coordinates that define a grid. The gridded boundary conditions will be applied to this grid.
    • Name – Name applied to the grid ((in SMS??)). Name might be used later to refer to this grid by other boundary conditions in this model.
    • NetCDF variables – Sets the variables from the NetCDF file that the program should use to create the grid map.
      • X-Variable
      • Y-Variable
      • Z-Variable
    • Define vertical coordinate type – Option to specify the vertical coordinate convention. The different convention names correspond to distinct kinds of depth averaging.
      • "Elevation" – [1]. Here is the information. Not sure how to interpret it yet.
      • "Depth" –
      • "Sigma" –
      • "Height" –
    • Cell gridmap – When turned off
    • Boundary gridmap – If on, calculates
    • Suppress coverage warnings – Will suppress warnings that indicate the grid does not cover the entire domain.
Add Gridded BCs

This dialog allows for assigning ((??multiple boundary)) conditions to the one grid in the selected row??.

      • Add Gridded BCs
        • piAdd row
        • piDelete row
        • Type
        • Attributes
          • Assign BC... – Opens Assign Gridded Boundary Condition dialog.


Assign Gridded Boundary Condition
  • Options – TUFLOW Manual 15.4.4 BC Scale and BC Offset
    • Type
      • "MSLP_Grid" –
      • "W10_Grid" –
      • "Wave" –
    • Dataset file
    • Define Variables – Opens Select NetCDF Gridded BC Variable Names dialog.
    • Define default – This changes based on selection, so RC's still figuring out how to document this. TUFLOW FV has a table that could work, and for the wave BC they do have a strong description of variable types.
      • MSLP default
    • Define offset
      • MSLP offset
    • Define scale
      • MSLP scale
    • Define reference time
      • Use ISODate
      • Reference time
    • Define time units
      • Time units
        • "Hours"
    • Define update increment
      • Time
Grid Type Option or Variable Definition

All Grids Define default ((Defines default value for a given variable when TUFLOW FV gets a null-value from a boundary condition input??)
Define offset Sets the offset that TUFLOW FV will add to each variable of raw boundary condition data as it is read into TUFLOW FV. Offset will be added to each variable after it is multiplied by the set scale??
Define scale Sets the scale by which TUFLOW FV will multiply each variable of raw boundary condition data as it is read into TUFLOW FV. The data will be multiplied by the scale before the offset value for each variable is added.
Define reference time
Define time units
Define update increment

MSLP_Grid MSLP Mean sea level pressure
W10_Grid W10_X "10 m wind speed vector"
W10_Y "10 m wind speed vector"
Wave HSIGN Significant wave height?? (In TUFLOW FV documentation, it's usually called HSIG except for in one Table 15-3.)
TPS Smoothed peak wave period
DIR Mean wave direction. This is direction to which waves are heading when the
UBOT
TMBOT
FORCE_X
FORCE_Y
DEPTH
Select NetCDF Gridded BC Variable Names
  • Variable names – The variables that appear varies exactly with the variables that appear in the Assign Gridded Boundary Condition dialog.
    • TIME variable name
      • "<use default>" –
      • "ResTime" –
      • "cell_Nvert" –
      • "cell_node" –
      • "NL" –
      • "idx2" –
      • "idx3" –
      • "cell_x" –
      • "cell_y" –
      • "cell_Zb" –
      • "cell_A" –
      • "node_X" –
      • "node_Y" –
      • "node_Zb" –
      • "layerface_Z" –
      • "stat" –
      • "D" –
      • "H" –
      • "V_x" –
      • "V_y" –
      • "Zb" –
    • MSLP variable name

Simulation links

The Simulation Links tab of the TUFLOW FV Model Control dialog

The Simulation links tab of the TUFLOW FV Model Control dialog contains the following options:

  • piAdd row – Brings up the Select Child TUFLOW FV Simulation dialog. In this dialog another TUFLOW FV simulation can be select to link as a child simulation to the current simulation.
  • piDelete row – Unlinks the selected simulation.


Advanced

The Advanced tab of the TUFLOW FV Model Control dialog contains the option to include advanced options These options can be added in the text editor located in this tab. The text will be appended to the FVC file with the simulation is exported.

Using the Model / Practical Notes

A TUFLOW licence is not required to run a TUFLOW FV model.

External Links