User:Klemon/SMS Hardware Locks: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
__NOINDEX__
*NOTE: Legacy Licensing must be turned on in order to use a Hardware Lock(network or otherwise.)
 
==Turning on Legacy Licensing==
# Select '''Edit.'''
# Select '''Preferences''' at the bottom, this should open the ''SMS Preferences window.''
# Click on the Licensing tab in the top right corner.
# Click the small box next to '''Use Legacy Licensing.'''
# Select '''OK''' to close the window.
You must restart the program for Legacy Licensing to function.
After restarting and reopening the program, the register dialog should give the option for the '''Hardware Lock.'''
 
==Single User USB Hardware Lock [http://www.aquaveo.com/pdf/license_instructions/v1/Register_SMS_with_a_SUHWL_I.pdf]==
==Single User USB Hardware Lock [http://www.aquaveo.com/pdf/license_instructions/v1/Register_SMS_with_a_SUHWL_I.pdf]==
# Install the hardware lock drivers. If hardware lock drivers have already been installed, skip to the next step. The drivers can be installed by running the '''Sentinel System Driver Installer.exe''' program found in the SMS installation directory.
# Install the hardware lock drivers. If hardware lock drivers have already been installed, skip to the next step. The drivers can be installed by running the '''Sentinel System Driver Installer.exe''' program found in the SMS installation directory.
# After installing the hardware lock drivers, plug the Aquaveo hardware lock into an available USB port.
# After installing the hardware lock drivers, plug the Aquaveo hardware lock into an available USB port.
# Start SMS and the program should automatically detect the hardware lock. If the Welcome dialog appears, click the '''Register…''' button.
# Start SMS and the program should automatically detect the hardware lock. If the Welcome dialog appears, click the '''Register…''' button.
# Select '''Hardware lock''' for the Licensing method and click the '''Next >''' button.
# In the Hardware lock options, select '''Get license from a single user lock''' and click the '''Next >''' button.
# If the registration is successful, click '''Finish''' to exit the ''Registration Wizard''.
# The ''Register SMS'' dialog displays the registered components, licensing method, and license expiration dates.


==Update a Single User USB Hardware Lock [http://www.aquaveo.com/pdf/license_instructions/v1/Register_SMS_Burn_SUHWL_I.pdf]==
==Update a Single User USB Hardware Lock [http://www.aquaveo.com/pdf/license_instructions/v1/Register_SMS_Burn_SUHWL_I.pdf]==
# Plug the Aquaveo hardware lock into a computer with hardware lock drivers and SMS installed.
# Plug the Aquaveo hardware lock into a computer with hardware lock drivers and SMS installed.
# Start SMS and select the '''Register…''' button when the welcome screen appears. If the welcome screen does not appear automatically, select '''Register...''' from the ''Help'' menu in SMS.
# Start SMS and select the '''Register…''' button when the welcome screen appears. If the welcome screen does not appear automatically, select '''Register...''' from the ''Help'' menu in SMS.
# Select '''Hardware lock''' for the Licensing method and click the '''Next >''' button.
# In the ''Hardware lock'' options, select '''Modify lock on this computer with the following code''' and click the '''Next >''' button.
# In the ''Hardware Lock'' dialog, click the '''Next >''' button to burn the hardware lock.
# If the registration is successful, click '''Finish''' to exit the ''Registration Wizard''.
# The ''Register SMS'' dialog indicates the registered components, the licensing method, and the license expiration dates.


==Setup a Network License Server [http://www.aquaveo.com/pdf/license_instructions/v1/Register_SMS_NW_License_Server_Setup_I.pdf]==
==Setup a Network License Server [http://www.aquaveo.com/pdf/license_instructions/v1/Register_SMS_NW_License_Server_Setup_I.pdf]==
Line 18: Line 37:
==Network USB Hardware Lock [http://www.aquaveo.com/pdf/license_instructions/v1/Register_SMS_with_a_NWHWL_Client_I.pdf]==
==Network USB Hardware Lock [http://www.aquaveo.com/pdf/license_instructions/v1/Register_SMS_with_a_NWHWL_Client_I.pdf]==
# Start SMS and select the '''Register…''' button when the welcome screen appears. If the welcome screen does not appear automatically, select '''Register...''' from the ''Help'' menu in SMS.
# Start SMS and select the '''Register…''' button when the welcome screen appears. If the welcome screen does not appear automatically, select '''Register...''' from the ''Help'' menu in SMS.
# Select '''Hardware lock''' for the Licensing method and click the '''Next >''' button.
# In the ''Hardware lock'' options, select '''Get license from a network lock''' and click the '''Next >''' button.
# Enter the ''IP address'' or ''Host name'' of the server hosting the network hardware lock.
# Click the '''Browse Lock Setting...''' button. This opens a web browser and tests the connection to the hardware lock over a local network.
# Click the '''Apply Lock Setting...''' button.
# Once the "Lock license acquired" message appears, click the '''Finish''' button.
# The ''Register SMS'' dialog displays the registered components, licensing method, hardware lock serial number, and license expiration dates.


==Update a Network USB Hardware Lock [http://www.aquaveo.com/pdf/license_instructions/v1/Register_SMS_Burn_NWHWL_I.pdf]==
==Update a Network USB Hardware Lock [http://www.aquaveo.com/pdf/license_instructions/v1/Register_SMS_Burn_NWHWL_I.pdf]==
# Plug the Aquaveo hardware lock into a computer with hardware lock drivers and SMS installed.
# Plug the Aquaveo hardware lock into a computer with hardware lock drivers and SMS installed.
# Start SMS and select the '''Register…''' button when the welcome screen appears. If the welcome screen does not appear automatically, select '''Register...''' from the ''Help'' menu in SMS.
# Start SMS and select the '''Register…''' button when the welcome screen appears. If the welcome screen does not appear automatically, select '''Register...''' from the ''Help'' menu in SMS.
# Select '''Hardware lock''' for the Licensing method and click the '''Next >''' button.
# In the ''Hardware lock'' options, select '''Modify lock on this computer with the following code''' and click the '''Next >''' button.
# In the ''Hardware Lock'' dialog, enter the number of licenses to burn on the lock. This number is typically the same as the number of licenses purchased and available. Click the '''Next >''' button to burn the hardware lock.
# If the registration is successful, click '''Finish''' to exit the ''Registration Wizard''. Please note that the ''Registration'' dialog may not show the enabled components. To verify the enabled components on the network lock, refer to the instructions for registering SMS with a Network Lock.
# Return the network hardware lock to the computer serving as the license server if necessary.





Latest revision as of 20:00, 25 August 2022

  • NOTE: Legacy Licensing must be turned on in order to use a Hardware Lock(network or otherwise.)

Turning on Legacy Licensing

  1. Select Edit.
  2. Select Preferences at the bottom, this should open the SMS Preferences window.
  3. Click on the Licensing tab in the top right corner.
  4. Click the small box next to Use Legacy Licensing.
  5. Select OK to close the window.

You must restart the program for Legacy Licensing to function. After restarting and reopening the program, the register dialog should give the option for the Hardware Lock.

Single User USB Hardware Lock [1]

  1. Install the hardware lock drivers. If hardware lock drivers have already been installed, skip to the next step. The drivers can be installed by running the Sentinel System Driver Installer.exe program found in the SMS installation directory.
  2. After installing the hardware lock drivers, plug the Aquaveo hardware lock into an available USB port.
  3. Start SMS and the program should automatically detect the hardware lock. If the Welcome dialog appears, click the Register… button.
  4. Select Hardware lock for the Licensing method and click the Next > button.
  5. In the Hardware lock options, select Get license from a single user lock and click the Next > button.
  6. If the registration is successful, click Finish to exit the Registration Wizard.
  7. The Register SMS dialog displays the registered components, licensing method, and license expiration dates.

Update a Single User USB Hardware Lock [2]

  1. Plug the Aquaveo hardware lock into a computer with hardware lock drivers and SMS installed.
  2. Start SMS and select the Register… button when the welcome screen appears. If the welcome screen does not appear automatically, select Register... from the Help menu in SMS.
  3. Select Hardware lock for the Licensing method and click the Next > button.
  4. In the Hardware lock options, select Modify lock on this computer with the following code and click the Next > button.
  5. In the Hardware Lock dialog, click the Next > button to burn the hardware lock.
  6. If the registration is successful, click Finish to exit the Registration Wizard.
  7. The Register SMS dialog indicates the registered components, the licensing method, and the license expiration dates.

Setup a Network License Server [3]

  1. Install the Sentinel installation program that includes hardware lock drivers and the Sentinel Protection Server software. The installation program can be downloaded at www.aquaveo.com/downloads.
  2. In the Sentinel installation wizard, select "Complete" for the setup type.
  3. After installing the Sentinel lock drivers and server software, plug the Aquaveo hardware lock into an available USB port.
  4. Ensure that the computer with the network hardware lock can be seen by other computers on the local network. Client machines can connect to the server by hostname or IP address.
  5. The License Server is now ready to provide SMS licenses to client machines. Refer to the instructions for registering SMS with a Network USB Hardware Lock for more information.

Network USB Hardware Lock [4]

  1. Start SMS and select the Register… button when the welcome screen appears. If the welcome screen does not appear automatically, select Register... from the Help menu in SMS.
  2. Select Hardware lock for the Licensing method and click the Next > button.
  3. In the Hardware lock options, select Get license from a network lock and click the Next > button.
  4. Enter the IP address or Host name of the server hosting the network hardware lock.
  5. Click the Browse Lock Setting... button. This opens a web browser and tests the connection to the hardware lock over a local network.
  6. Click the Apply Lock Setting... button.
  7. Once the "Lock license acquired" message appears, click the Finish button.
  8. The Register SMS dialog displays the registered components, licensing method, hardware lock serial number, and license expiration dates.

Update a Network USB Hardware Lock [5]

  1. Plug the Aquaveo hardware lock into a computer with hardware lock drivers and SMS installed.
  2. Start SMS and select the Register… button when the welcome screen appears. If the welcome screen does not appear automatically, select Register... from the Help menu in SMS.
  3. Select Hardware lock for the Licensing method and click the Next > button.
  4. In the Hardware lock options, select Modify lock on this computer with the following code and click the Next > button.
  5. In the Hardware Lock dialog, enter the number of licenses to burn on the lock. This number is typically the same as the number of licenses purchased and available. Click the Next > button to burn the hardware lock.
  6. If the registration is successful, click Finish to exit the Registration Wizard. Please note that the Registration dialog may not show the enabled components. To verify the enabled components on the network lock, refer to the instructions for registering SMS with a Network Lock.
  7. Return the network hardware lock to the computer serving as the license server if necessary.


Related Topics