SMS:BOUSS Runup / Overtopping Input Files
The following files are used by BOUSS-2D in a run-up simulation:
- porosity.grd (optional)
- damping.grd (optional)
- friction.grd (optional)
Each of these can be read/written by SMS. The prefix for each file will follow this format: "coveragename_arcId".
SMS will write a parameter file (*.par) for each set of wave parameters on each transect. This file contains model control information, 1-d grid data, and the wave maker parameters. Each parameter file represents a unique simulation.
This file (bathy.grd) defines the elevations along the 1-d grid (transect arc).
A porosity file (porosity.grd) will be written for each transect arc that is overlapped by a porosity arc. This file defines the porosity values along the 1-d grid. If no porosity arcs are defined, the model uses a default value of 1.0 along the entire grid.
A damping file (damping.grd) will be written for each transect arc that is overlapped by a damping arc. This file defines the damping values along the 1-d grid. If no damping arcs are defined, the model uses a default value of 0.0 along the entire grid.
A friction file (friction.grd) will be written for each transect arc that is overlapped by a roughness polygon. This file defines the roughness values along the 1-d grid. If no roughness polygons are defined, the model uses the Chezy coefficient defined in the model control along the entire grid.
SMS – Surface-water Modeling System
|Modules:||1D Grid • Cartesian Grid • Curvilinear Grid • GIS • Map • Mesh • Particle • Quadtree • Raster • Scatter • UGrid|
|General Models:||3D Structure • FVCOM • Generic • PTM|
|Coastal Models:||ADCIRC • BOUSS-2D • CGWAVE • CMS-Flow • CMS-Wave • GenCade • STWAVE • WAM|
|Riverine/Estuarine Models:||AdH • HEC-RAS • HYDRO AS-2D • RMA2 • RMA4 • SRH-2D • TUFLOW • TUFLOW FV|
|Aquaveo • SMS Tutorials • SMS Workflows|