SMS:WAM Graphical Interface

From XMS Wiki
(Redirected from SMS:WAM Cell Attributes)
Jump to navigationJump to search


The WAM interface supports the wave model WAM.

WAM models are built by creating WAM grids, WAM simulations (right-click in blank area of Project Explorer), and dragging the WAM grids you want to use into each WAM simulation. There are options specific to each grid in a simulation as well as the simulation as a whole (model control).

WAM has the ability to use nested grids to improve resolution in an area of interest.

WAM Menus

The WAM Model makes use of a variety of menus depending on the active item.

WAM Grid Menu

For grids created from a WAM coverage in the Map module, the WAM menu will appear when the grid is active. The following option are under the WAM menu:

  • Assign Cell Attributes – Brings up a Cell Attributes dialog where a spectra site can be assigned to the cell.
  • Model Control – Brings up the Grid Options dialog for WAM.

WAM Grid Right-Click Menu

Right-clicking on a WAM grid item in the Project Explorer contains the standard right-click menu commands as well as the following additional commands:

WAM Simulation Menu

The WAM simulation menu is accessed by right-clicking on the WAM simulation WAM Simulation Icon.svg in the Project Explorer under the WAM folder WAM Folder Icon.svg. It has the following options:

  • Delete – Removes the simulation from the project.
  • Duplicate – Creates a copy of the selected simulation.
  • Rename – Will allow the name of the simulation to be changed.
  • Export WAM Files – Generates the WAM files necessary for the model run.
  • Launch WAM – Will start the WAM model wrapper.
  • Save Project, Export, and Launch WAM – Performs the process of saving the WAM project, exporting the model files, and running the WAM model all at once.
  • Assign Cell Attributes – Brings up the Cell Attributes dialog.
  • Model Control – Brings up the WAM Simulation Model Control.
  • Read Spectra Files

Polygon Attributes

Polygon Attributes dialog

The Polygon Attributes dialog is used to set the attributes for feature polygons. It is reached by double-clicking on a polygon in a WAM coverage. Attributes that can be specified for each polygon include:

  • Polygon Type
    • Land – Specifies the area as being land cells when the coverage is used to create a grid.
    • Ocean – Specifies the area as being ocean cells when the coverage is used to create a grid.

WAM Simulation

A new WAM simulation is created by right-clicking in the Project Explorer and selecting WAM from the New Simulation menu. The WAM grid is then dragged under the new simulation to create a link Grid Link.svg. If there are multiple grids in the same project (for example, nested grid and parent grid), all grids should be linked to the simulation.

Multiple simulations can also be created.

Model Control

Once a simulation is created and the grid(s) is linked, the grid options can be edited in the Simulation Model Control which can be accessed by right-clicking on the simulation. Once all information is entered, WAM files can be exported, the project can be saved and WAM can be launched.

See WAM Simulation Model Control for more information.

Model Wrapper

Example of the WAM model wrapper

Once all of the simulation information is ready, the WAM files can be exported by right-clicking on the simulation. After the WAM files are exported, then the model wrapper can be launched by right-clicking on the simulation and choosing Launch WAM. Both steps can be done with the Save Project, Export, and Launch WAM option, also under the right-click menu.

SMS will export all WAM files to a folder with the same name as the simulation under the WAM folder in the same directory as the saved SMS project. All wind dataset files will be in a folder called WindInput under the simulation folder. All WAM files, except the wind dataset, for each grid in the simulation will be in a folder with the same name as the grid under the simulation folder.

After all the files for a WAM simulation have been exported, the WAM executables can be launched. There are three WAM executables which are preproc, chief and map_to_rast. These must be executed in order for a given grid.

Preproc, or WAM_Preproc, reviews the grid and creates the "Grid_Info" and "Preproc_prot" files. The prot file is an ASCII dump of the model process. This file can be opened in a text editor to verify that the model was executed and didn't detect problems. The Grid_info file is used in the next phase of the simulation.

Chief, or WAM_Chief, is the main process of WAM and takes the bulk of the run time. It creates the boundary value output files, the integrated parameter files, the restart files, the spectral output files, and the WAM_Prot file. The process does not output any diagnostics as it runs, so the model wrapper cannot pass along progress information as the model runs. This process creates a "prot" file, an ASCII dump of the model process that can be reviewed in a text editor. It also outputs three series of solution files. Each of these includes a particular type of output for a specified simulation interval.

The three types of output file are:

  • IntOut### – The interval output file. It contains the spatially varied datasets computed by WAM.
  • SpectraOut#### – The spectral output file. It contains the spectra at each spectral site, at the output frequency specified for spectral output.
  • Restart### – A series of files which contain information to restart the simulation at a specific point if needed.

Map_to_rast creates the HDF5 file of the datasets that SMS can read. Map_To_Raster is a utility that converts the data in the IntOut### solution files into an HDF5 format so that SMS can read them. This allows for post processing of the datasets. SMS writes a script, fort.10, that instructs this utility to name the solution file wam_output.h5.

SMS will automatically run all grids in a simulation, even nested grids. The model wrapper will run a process for a coarse grids before running the same process for one of the grids nested inside of it.

Nested Grids

  • Used to make a finer grid of a particular area that will use input information from the coarse grid.
  • To create a nested grid, make a grid frame around the area of the coarse grid to which you wish to make a nested grid. Then, before the nested grid is mapped, check the Fine Grid checkbox and select the coarse grid from the Coarse Grid combobox. This will change the values for the newly mapped grid, such as the origin and increment, to correspond to cells in the coarse grid.
  • The dataset for the wind of the coarse grid may be used for the fine grid. Other datasets, such as for ice and currents, for the fine grid will need to be made in the same manner as the coarse grid, if they are to be used.
  • The nested(fine) grid will have to be added to the simulation as well as the parent(coarse) grid.

WAM Wet and Dry Cells

Wet/dry status for WAM cells is determined solely upon the z values (represented as a depth). If the depth is positive, the cell is wet. If the depth is negative, the cell is dry.

Only wet cells may be used as spectra sites.

To display wet/dry cells: Select the WAM grid Display→Display Options then turn on land and ocean cell. For best results also turn off contours.

The following operations may change the wet/dry status of a WAM cell since they are changing the depth values.

  1. Select 1 or more WAM cells and then change the Z value found at the top.
  2. Select and right-click a WAM cell. Choose Interpolate Bathymetry...
  3. Enter a "single value" on the left side and press Ok
  4. When converting a WAM map coverage to a WAM grid Map→2DGrid whatever value is in the Depth Options section will be converted.


Related Topics