Template:ADCIRC Levee Checks Workflow

From XMS Wiki
This is the approved revision of this page, as well as being the most recent.
Jump to navigationJump to search

The ADCRIC check/fix levee tools require an ADCRIC project with the following components:

  • An ADCRIC boundary conditions converage.
  • A 2D mesh or grid used as the domain for the ADCIRC simulation.
1. Check/fix levee crest elevations.
  1. Click the Toolbox Toolbox macro.png macro to open the Toolbox dialog.
  2. In the Toolbox dialog, select the Check/Fix Levee Crest Elevations tool under the ADCRIC folder and click the Run Tool... button.
  3. In the ADCIRC Check/Fix Levee Crest Elevations dialog, select the ADCRIC boundary conditions coverage and the domain grid, then enter the other parameters before running the tool.
2. Check/fix levee ground elevations.
  1. Click the Toolbox Toolbox macro.png macro to open the Toolbox dialog.
  2. In the Toolbox dialog, select the Check/Fix Levee Ground Elevations tool under the ADCRIC folder and click the Run Tool... button.
  3. In the ADCIRC Check/Fix Levee Ground Elevations dialog, select the ADCRIC boundary conditions coverage and the domain grid, then enter the other parameters before running the tool.
Retrieved from "https://www.xmswiki.com/index.php?title=Template:ADCIRC_Levee_Checks_Workflow&oldid=158833"