SMS:ADCIRC BC Nodestrings: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 9: Line 9:
To set the boundary types, choose the '''Select Feature Arc''' tool from the Toolbox and double-click the desired arc to open the ''ADCIRC Arc/Nodestring Attributes'' dialog; then assign the desired boundary conditions to the arc.
To set the boundary types, choose the '''Select Feature Arc''' tool from the Toolbox and double-click the desired arc to open the ''ADCIRC Arc/Nodestring Attributes'' dialog; then assign the desired boundary conditions to the arc.


[[File:adcirc nodestrings.jpg|thumb|left|440 px|ADCIRC Arc/Nodestring Attributes dialog]]
[[File:adcirc nodestrings.jpg|thumb|left|400 px|ADCIRC Arc/Nodestring Attributes dialog]]





Revision as of 17:04, 12 April 2013

Boundary conditions are assigned by setting attributes to Feature Arcs representing boundary arcs in the domain used in the simulation.

The ADCIRC Arc/Nodestring Attributes dialog allows the user to define the type of boundary conditions for each feature arc/nodestring.

A feature arc/nodestring can be defined as mainland, island, normal flow, mainland barrier, island barrier, tidal constituents, etc.

To set the boundary types, choose the Select Feature Arc tool from the Toolbox and double-click the desired arc to open the ADCIRC Arc/Nodestring Attributes dialog; then assign the desired boundary conditions to the arc.

ADCIRC Arc/Nodestring Attributes dialog