SMS:CMS-Flow/CMS-Wave Steering: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 18: Line 18:
*** Extrapolate Out – selecting this option causes the ''Distance'' field to become active where the distance can be specified.
*** Extrapolate Out – selecting this option causes the ''Distance'' field to become active where the distance can be specified.


Instructions for CMS-Flow/CMS-Wave steering can be found on the [http://cirp.usace.army.mil/wiki/CMS-Flow_and_CMS-Wave_Model_Coupling CIRP Wiki]
Instructions for CMS-Flow/CMS-Wave steering can be found on the [http://cirp.usace.army.mil/wiki/CMS-Flow_and_CMS-Wave_Model_Coupling CIRP Wiki].


== Related Topics ==
== Related Topics ==

Revision as of 16:33, 23 May 2013

Steering Wizard – CMS-Flow ↔ CMS-Wave dialog

Steering CMS INLINE page – Provides the ability to perform CMS-FLOW ↔ CMS-WAVE steering with data stored in memory. The steering is controlled by the cms-flow model executable and not by SMS.

The Steering Wizard – CMS-Flow ↔ CMS-Wave dialog is reached by going to the Data menu and selecting the Steering Module command. From the Steering Wizard dialog, select CMS INLINE and click on Next. The following dialog is the Steering Wizard – CMS-Flow ↔ CMS-Wave dialog. This dialog has the following options:

  • CMS-FLOW Source Grid option – Select the cms-flow grid to be used in the steering.
  • CMS-WAVE Source Grid option – Select the cms-wave grid to be used in the steering.
  • Time options – Select the time parameters from the cms-flow model control interface.
    • Total Simulation Time:
    • CMS-Flow Time Control – this button opens the CMS-Flow Model Control dialog.
    • Run CMS-Wave every: – this field lets the intervals in which SMS will run CMS-Wave
  • CMS-FLOW → CMS-WAVE options – Disabled. These options are set in the cms-flow model executable.
    • Current Field
    • Water Surface Elevation
  • CMS-WAVE → CMS-FLOW options – Disabled. These options are set in the cms-flow model executable.
    • Wave Data
      • Zero extrapolation
      • Extrapolate Out – selecting this option causes the Distance field to become active where the distance can be specified.

Instructions for CMS-Flow/CMS-Wave steering can be found on the CIRP Wiki.

Related Topics

External Links