SMS:2D Mesh Module Tools Right-Click Menus

From XMS Wiki
Revision as of 16:40, 13 December 2013 by Jcreer (talk | contribs)
Jump to navigationJump to search

The following tools are contained in the Dynamic Tools portion of the tool palette when the Mesh Module is active. These are tools with corresponding right-click menus.

File:Select node icon.bmp Select Mesh Nodes

  • Delete – Delete selected mesh Nodes.
  • Assign BC – Assign a boundary condition to selected mesh nodes.
  • TransformTransform the selected nodes either by scaling, translation, or rotation.
  • TriangulateTriangulate the selected nodes to form triangle elements.

File:SelectMeshNodestring.bmp Select Nodestrings

  • Delete Selected – Delete selected nodestrings.
  • Assign BC – Assign a boundary condition to selected nodestrings.
  • Reverse Direction – Reverse direction of selected nodestrings.
  • Force Breaklines – Force element edges to follow the selected nodestrings.
  • Renumber Nodes – Renumber the nodes starting with an ID of 1.
  • Renumber Nodestrings – renumber the nodestrings starting with an ID of 1.
  • Smooth – Smooth the mesh boundary along the path of a selected nodestring by moving midside nodes. Only used for quadratic elements.

|- |align="center"|File:SelectMeshElement icon.bmp |Select Elements |

  • Delete – Delete selected element.
  • Refine – Split all selected elements into four elements.
  • Relax – Moves all the nodes on the interior of the selected elements to the centroid of their contributing area. Iterates based on option set in the options command.
  • Assign Material Type – Assign material type to selected elements.

|}

Related Topics