SMS:BOUSS-2D Probes Workflow: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
m (Protected "SMS:BOUSS-2D Probes Workflow" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
No edit summary
 
Line 5: Line 5:
{{Navbox SMS}}
{{Navbox SMS}}


[[Category:SMS Workflows|Probes]]
[[Category:SMS Workflows|BOUSS-2D]]
[[Category:BOUSS-2D|Probes]]

Latest revision as of 20:00, 27 June 2017

To use BOUSS-2D probes, follow the steps below:

1. Select grid cells for probe locations.
  1. Using the Select Cell SMS Select Cell Mesh Tool.svg tool, select cells for the probe locations.
  2. Keep the cells selected or note the coordinates of the cells for the next step.
2. Use the simulation probe manager.
  1. Right-click on the BOUSS-2D simulation and select the Probe Manager command.
  2. In the BOUSS-2D Probe Manager dialog, generate probes either by using the selected cells or using the cell coordinates.
  3. In the BOUSS-2D Probe Manager dialog, assign probe parameters.
3. Run simulation.
  1. Right-click on the BOUSS-2D simulation and select Export BOUSS-2D.
  2. Right-click on the BOUSS-2D simulation and select Run BOUSS-2D.
4. View probe solutions.
  1. Use the File | Open command to open the probe solution file (*.ts1).
  2. Using the Select Cell SMS Select Cell Mesh Tool.svg tool, select the probe cells.
  3. Right-click on probes to select plot or analysis options commands.