SMS:BOUSS-2D Simulations: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
Line 2: Line 2:


To create a new Simulation:
To create a new Simulation:
# Right-click on empty space in the project explorer and select '''New Simulation→BOUSS-2D'''
# Right-click on empty space in the project explorer and select ''New Simulation''|'''BOUSS-2D'''
# Drag and drop bouss2d grid, wave maker/damping/porosity coverages under the newly created '''Simulation''' tree item.
# Drag and drop bouss2d grid, wave maker/damping/porosity coverages under the newly created '''Simulation''' tree item.
A New tree item will appear
A New tree item will appear

Revision as of 15:37, 11 May 2015

Simulations are available in BOUSS-2D starting in SMS 11.2. A simulation should contain a BOUSS-2D grid, a wave maker coverage, and optional damping and porosity coverages. Right-clicking on the simulation will display the options and dialogs.

To create a new Simulation:

  1. Right-click on empty space in the project explorer and select New Simulation|BOUSS-2D
  2. Drag and drop bouss2d grid, wave maker/damping/porosity coverages under the newly created Simulation tree item.

A New tree item will appear

Menu Commands

Right-clicking on the simulation tree item will display a list of menu commands and dialogs that are available. These items are:

  • Generating Arcs along land boundary – open a dialog that will create arcs in a damping or porosity coverage from an existing grid or scatterset.
  • Generating Arcs along open boundary – open a dialog that will create arcs in a damping or porosity coverage from an existing grid or scatterset.
  • Calculators
  • Spectral Energy
  • BOUSS-2D ProbesProbe Manager
  • Model Control

Output Options

The user can instruct BOUSS-2D to create a variety of output files. These may include spatially varied data consisting of a value for each cell in the grid, transient data defining time series at a location, or a combination of these two options (multiple time steps of data that includes a value at each cell). The output options, along with the keyword included in the parameter file to enable these options are shown below.

  • Steady-state/single value spatially varied datasets
  • Significant wave height (":HS_FILE")
  • Mean currents (":MEAN_UV_FILE")
  • Mean wave direction (":THETA_FILE")
  • Transient spatially varied datasets. Each output includes data from a specified start time, to a specified end time at a specified time step.
  • Water surface elevations (":SAVE_ETA_ANIMATION")
  • Transient currents (":SAVE_UV_ANIMATION")
  • Time series output at specified cells (probes). BOUSS-2D saves each type of data (for multiple locations) in a single "*.ts1" file.
  • Water surface elevations (":TS_ETA_FILE")
  • Currents (":TS_U_FILE", ":TS_V_FILE") – This saves the current at a specified elevation up from the bed. Multiple elevations can be monitored.
  • Pressure (":TS_PRESSURE_FILE") – This saves the pressure at a specified elevation up from the bed. Multiple elevations can be monitored.
  • Flow rate (":TS_Q_FILE" – This saves the flow crossing a location and can be used for overtopping.

The spatially varied data may be output in to either BOUSS-2D native files or a eXtensible Data Format File (XMDF). If BOUSS-2D format is specified, the model creates "*.grd" files for each of the single value spatially varied outputs and binary data files for the transient data. The ":SOLUTION_FILE_OPTION" in the par file instructs the model to save the data in BOUSS-2D format (if set to 0), XMDF format (if set to 1) or both formats (if set to 2). When the XMDF option is specified, the ":XMDF_SOLUTION_FILE" record must also be in the parameters file along with the name of the XMDF file to store the datasets in.

The output options are located in the model control.

  • Model Check – The model check will warn the user of potential errors that should be considered for fixing before running the model.
  • Exporting – When the BOUSS-2D files are exported a new directory under the project called “BOUSS-2D” is created. In this directory, the grids will be written to. Also a new directory under the “BOUSS-2D” will be created and it will be the name of the simulation. In this directory, the *.par file(link to Parameter file) can be found.
  • Running the model

Related Topics