SMS:RMA4 Boundary Conditions: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 16: Line 16:
[[File:rma4 bc nodestrings.jpg|thumb|270|''RMA4 Assign Boundary Conditions'' dialog]]
[[File:rma4 bc nodestrings.jpg|thumb|270|''RMA4 Assign Boundary Conditions'' dialog]]


Nodestrings can be used as boundary conditions to define constituent concentrations being modeled. Constituent concentrations can be defined as constant or transient using the [[XY Series Editor|XY Series Editor]].  
Nodestrings can be used as boundary conditions to define constituent concentrations being modeled. Constituent concentrations can be defined as constant or transient using the [[XY Series Editor|''XY Series Editor'']].  


RMA4 does not care about the units of the concentration because the output is relative to the initial number the user specifies. For example, if we specify a concentration of 1,000, the values in the solution will range from 0 to 1,000 as the plume spreads downstream. We can say that the concentration is ppm, ppt, or kg/kg; RMA4 treats all concentrations as relative values.
RMA4 does not care about the units of the concentration because the output is relative to the initial number the user specifies. For example, if we specify a concentration of 1,000, the values in the solution will range from 0 to 1,000 as the plume spreads downstream. We can say that the concentration is ppm, ppt, or kg/kg; RMA4 treats all concentrations as relative values.

Revision as of 15:23, 14 August 2014


Assigning Boundary Conditions

Boundary conditions are generally defined on nodestrings but may also be defined on elements. The default RMA4 boundary condition is a closed boundary (no constituent). To assign boundary conditions, select the item (nodestring, element, etc.) to which the boundary condition should be applied and use the menu command RMA4 | Assign Boundary Conditon which will open a dialog allowing the specification of boundary condition options.

Element Loading

Starting in SMS 10.1, it is now possible to assign a mass loading to an element.

To do this, select the element then go to RMA4 | Assign BC.

File:RMA4 Assign Element Mass Loading.JPG

Deleting Boundary Conditions

Boundary conditions are removed using the menu command RMA4 | Delete Boundary Conditon

Nodestring Boundary Conditions

File:Rma4 bc nodestrings.jpg
RMA4 Assign Boundary Conditions dialog

Nodestrings can be used as boundary conditions to define constituent concentrations being modeled. Constituent concentrations can be defined as constant or transient using the XY Series Editor.

RMA4 does not care about the units of the concentration because the output is relative to the initial number the user specifies. For example, if we specify a concentration of 1,000, the values in the solution will range from 0 to 1,000 as the plume spreads downstream. We can say that the concentration is ppm, ppt, or kg/kg; RMA4 treats all concentrations as relative values.

Since a concentration in water is rarely rigidly maintained, a shock factor may be applied to allow fluctuation of the concentration when the flow direction changes. If no shock factor is applied, no matter how much the flow pushes the concentration out of the model, the concentration at the boundary will not change. However, applying a shock factor is like creating a buffer zone outside the model where the constituent can go until the flow begins to carry it back into the model. This provides for a more realistic solution in some cases. Depending on the situation, a different shock factor may be applied from zero for no shock to 1.0 for a gradual change due to a change in flow direction.

By right-clicking on a selected nodestring and selecting Assign BC | RMA4... will bring up the RMA4 Assign Boundary Conditions dialog. The dialog has the following options:

  • Constituent
  • Constant
  • Transient
  • Curve undefined
  • No factor applied when flow direction changes
  • Factor applied when flow direction changes
  • Rigby maintained boundary

Element Boundary Conditions

File:SMS RMA4 Assign Element Mass.jpg
RMA4 Assign Element Mass Loading dialog

A boundary mass loading can be added to an element in the mesh by selecting first the desired element and then the RMA4 | Assign BC menu command. This opens the RMA4 Assign Element Mass Loading dialog where a constant or transient entry can be made in grams/second for each constituent defined in the RMA4 model control dialog. The time variant option uses a XY Series File, XYS Format editor to enter a series of time step-mass loading pairs. The time steps should be consistent with those of the RMA4 simulation and for each constituent. The mass loadings may be deleted using the RMA4|Delete BC menu command.

Card Type RMA4 BLE Card: Boundary Loading (Mass)
Description Used to assign mass loading on the element boundary.
Required NO
Format BLE
Sample BLE 237 2 3
Field Variable Value Description
0 IC1 BLE Card type identifier.
1 ISTART + Element id
2 PBCX(J,1) + Mass loading for constituent 1 at ISTART=J (g/s)
3 PBCX(J,2) + Mass loading for constituent 2 at ISTART=J (g/s)
4 PBCX(J,3) + Mass loading for constituent 3 at ISTART=J (g/s)
5 PBCX(J,4) + Mass loading for constituent 4 at ISTART=J (g/s)
6 PBCX(J,5) + Mass loading for constituent 5 at ISTART=J (g/s)
7 PBCX(J,6) + Mass loading for constituent 6 at ISTART=J (g/s)


Card Type END
Description Identifies the end of the time step
Required NO

Related Topics