Template:Bridge Scour Workflow: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
 
(10 intermediate revisions by the same user not shown)
Line 1: Line 1:
{| class="mw-collapsible mw-collapsed" style="width:80%; border:1px solid #D0E0FF; margin-bottom:0.4em;"
{| class="mw-collapsible mw-collapsed" style="width:80%; border:1px solid #D0E0FF; margin-bottom:0.4em;"
|-
|-
Line 5: Line 6:
|
|
:The bridge scour tool requires an existing 2D mesh with solutions sets.  
:The bridge scour tool requires an existing 2D mesh with solutions sets.  
:* Solutions sets should include elevation, water surface elevation, water depth, and velocity datasets.
:* Solutions sets should include at least one water surface elevation, water depth, and velocity datasets.
:* SRH-2D is the recommended model to use for generating the solution sets, however, other 2D mesh models may be used.
:* [[SMS:SRH-2D Project Workflow|SRH-2D]] is the recommended model to use for generating the solution sets, however, other 2D mesh models may be used.
:* A [[SMS:Mesh Creation Workflow|2D mesh may be generated]] without a model and solution set created using [[SMS:Scatter_Data_Workflow|scatter data]] and the [[SMS:Dataset Toolbox|''Dataset Toolbox'']].
|}
|}
{| class="mw-collapsible mw-collapsed" style="width:80%; border:1px solid #D0E0FF; margin-bottom:0.4em;"
{| class="mw-collapsible mw-collapsed" style="width:80%; border:1px solid #D0E0FF; margin-bottom:0.4em;"
Line 13: Line 15:
|-
|-
|
|
 
:Create a new coverage with the "Bridge Scour" type.
<blockquote>
{{SMS new coverage workflow}}
</blockquote>
|}
|}
{| class="mw-collapsible mw-collapsed" style="width:80%; border:1px solid #D0E0FF; margin-bottom:0.4em;"
{| class="mw-collapsible mw-collapsed" style="width:80%; border:1px solid #D0E0FF; margin-bottom:0.4em;"
Line 38: Line 43:
|-
|-
|
|
 
:In the ''Bridge Scour Coverage Properties'' dialog:
:# Enter the ''Output Filename'' and '''Browse''' to the desired location.
:# Click the '''View Values''' button to generate a preview of the values to be exported.
:# Click '''Export Hydraulic Toolbox File''' to create the bridge scour file.
|}<noinclude>[[Category:SMS Workflow Templates|bridge]]</noinclude>
|}<noinclude>[[Category:SMS Workflow Templates|bridge]]</noinclude>

Latest revision as of 15:56, 14 November 2018

1. Begin with an existing project containing a 2D mesh.
The bridge scour tool requires an existing 2D mesh with solutions sets.
  • Solutions sets should include at least one water surface elevation, water depth, and velocity datasets.
  • SRH-2D is the recommended model to use for generating the solution sets, however, other 2D mesh models may be used.
  • A 2D mesh may be generated without a model and solution set created using scatter data and the Dataset Toolbox.
2. Create a Bridge Scour coverage.
Create a new coverage with the "Bridge Scour" type.
1. Create new coverage from scratch.
  1. Select Map Data in the Project Explorer and use the New Coverage right-click command.
  2. Use the New Coverage dialog to create a new coverage by selecting the desired coverage type, and naming the coverage.
2. Create new coverage from an existing coverage.
  1. Use the Duplicate command on an existing coverage. This will copy any feature objects on the coverage.
  2. Use the Rename command to give the coverage a new name.
  3. Change the coverage type.
3. Define the bridge scour arcs in order.
1. Create the Contracted Section Arc.
It is important that the contracted arc be created in the correct direction starting on the left side of the river and crossing to the right side. The contracted section arc is created at the maximum contraction of flow through the bridge constriction within the bridge limits.
1. Create feature arcs, nodes and vertices.
In the Map module, create feature objects in the active coverage.
  1. Use the Create Feature Arc SMS Create Arc Tool.svg tool to create arcs in the map coverage.
  2. Begin creating a new arc by clicking in the Graphics Window at either arc end. If clicking on an existing feature node, vertex or arc, the new arc will snap to that object.
  3. Double-click or press the Enter key to terminate the arc.
  4. Use the Create Feature Node Create Points Tool.svg tool to create additional nodes alone or to split arcs.
2. Modify arcs.
Feature arcs often need to be edited after initial creation.
1. Create additional vertices on arcs.
  1. Use the Create Feature Vertex SMS Create Vertex Tool.svg tool to add vertices along arcs.
2. Refine the arc shape.
  1. Use the Select Feature Vertex SMS Select Vertex Tool.svg tool and the Select Feature Node SMS Select Node Tool.svg tool to move/edit existing arcs and refine the shape by dragging the nodes/vertices.
  2. Use the Select Feature Arc SMS Select Arc Tool.svg tool to move entire arcs .
3. Split arcs.
An existing arc can be split by:
1. Converting a vertex to a node.
  1. Use the Select Feature Vertex SMS Select Vertex Tool.svg tool and right-click on a vertex along an arc.
  2. Select the Convert to Node command to split the arc into two arcs.
2. Add a node the arc.
  1. Use the Create Feature Node Create Points Tool.svg tool to add a node on an arc in order to split it into two arcs.
3. Add a new connecting arc.
  1. Use the Create Feature Arc SMS Create Arc Tool.svg tool to start or end a new arc on an existing arc to split the existing arc into two arcs.
4. Use the Split Arcs Tool.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Split Arc(s)... command.
  2. Use the Split Arcs Tool to divide arcs.
5. Split overlapping arcs using the Clean Options dialog.
  1. Select overlapping arcs using the Select Feature Arc SMS Select Arc Tool.svg tool.
  2. Use the Feature Objects | Clean command to bring up the Clean Options dialog.
  3. Select the Intersect selected arcs option (for selected arcs) or Intersect arcs option (for all overlapping arcs) to split the arcs.
4. Merge arcs.
Two arcs that share an end node can be merged together.
  1. Select the shared node using the Select Feature Node SMS Select Node Tool.svg tool.
  2. Right-click on the node and select the Convert to Vertex command to merge the arcs.
  3. If desired, the Select Feature Vertex SMS Select Vertex Tool.svg tool can be used to select and delete the new vertex.
5. Smooth arcs.
The variability or roughness of an arc can be reduced.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Smooth Arc(s)... command.
  2. Use the Smooth Arcs Tool to reduce the variability of the arc.
6. Prune arcs.
Concave sections of the arc can be removed.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Prune Arc(s)... command.
  2. Use the Prune Arcs dialog to remove concave sections.
7. Extend/trim arcs.
Extend or shorten an arc to match an existing arc's length.
  1. Using the Select Feature Arc SMS Select Arc Tool.svg tool, select two intersecting arcs.
  2. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Extend/Trim Arc... command.
  3. Use the Trim/Extend Arc dialog to select the target arc and source arc.
3. Assign Contracted Section Arc properties.
If this is the first arc created on the Bridge Scour coverage, then it will automatically be assigned the "Contracted Section Arc" type. Otherwise, do the following:
  1. Using the Select Feature Arc SMS Select Arc Tool.svg tool, select the Contracted Section Arc.
  2. Right-click and select the Attributes command.
  3. In the Bridge Scour Arc Attributes dialog, assign the Type as "Contracted Section Arc".
2. Create the Approach Section Arc.
The approach section arc will span the entire width of flow and travel perpendicular to the flow. It will begin at a dry location on the left side of the stream (looking downstream) and terminate on the right side of the stream. This arc should be located upstream of the influence of the bridge where it is representative of the natural channel hydraulics and sediment transport. This location should be just upstream from where the flows in the stream begin to converge towards the channel and span the channel perpendicular to the flow.
1. Create feature arcs, nodes and vertices.
In the Map module, create feature objects in the active coverage.
  1. Use the Create Feature Arc SMS Create Arc Tool.svg tool to create arcs in the map coverage.
  2. Begin creating a new arc by clicking in the Graphics Window at either arc end. If clicking on an existing feature node, vertex or arc, the new arc will snap to that object.
  3. Double-click or press the Enter key to terminate the arc.
  4. Use the Create Feature Node Create Points Tool.svg tool to create additional nodes alone or to split arcs.
2. Modify arcs.
Feature arcs often need to be edited after initial creation.
1. Create additional vertices on arcs.
  1. Use the Create Feature Vertex SMS Create Vertex Tool.svg tool to add vertices along arcs.
2. Refine the arc shape.
  1. Use the Select Feature Vertex SMS Select Vertex Tool.svg tool and the Select Feature Node SMS Select Node Tool.svg tool to move/edit existing arcs and refine the shape by dragging the nodes/vertices.
  2. Use the Select Feature Arc SMS Select Arc Tool.svg tool to move entire arcs .
3. Split arcs.
An existing arc can be split by:
1. Converting a vertex to a node.
  1. Use the Select Feature Vertex SMS Select Vertex Tool.svg tool and right-click on a vertex along an arc.
  2. Select the Convert to Node command to split the arc into two arcs.
2. Add a node the arc.
  1. Use the Create Feature Node Create Points Tool.svg tool to add a node on an arc in order to split it into two arcs.
3. Add a new connecting arc.
  1. Use the Create Feature Arc SMS Create Arc Tool.svg tool to start or end a new arc on an existing arc to split the existing arc into two arcs.
4. Use the Split Arcs Tool.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Split Arc(s)... command.
  2. Use the Split Arcs Tool to divide arcs.
5. Split overlapping arcs using the Clean Options dialog.
  1. Select overlapping arcs using the Select Feature Arc SMS Select Arc Tool.svg tool.
  2. Use the Feature Objects | Clean command to bring up the Clean Options dialog.
  3. Select the Intersect selected arcs option (for selected arcs) or Intersect arcs option (for all overlapping arcs) to split the arcs.
4. Merge arcs.
Two arcs that share an end node can be merged together.
  1. Select the shared node using the Select Feature Node SMS Select Node Tool.svg tool.
  2. Right-click on the node and select the Convert to Vertex command to merge the arcs.
  3. If desired, the Select Feature Vertex SMS Select Vertex Tool.svg tool can be used to select and delete the new vertex.
5. Smooth arcs.
The variability or roughness of an arc can be reduced.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Smooth Arc(s)... command.
  2. Use the Smooth Arcs Tool to reduce the variability of the arc.
6. Prune arcs.
Concave sections of the arc can be removed.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Prune Arc(s)... command.
  2. Use the Prune Arcs dialog to remove concave sections.
7. Extend/trim arcs.
Extend or shorten an arc to match an existing arc's length.
  1. Using the Select Feature Arc SMS Select Arc Tool.svg tool, select two intersecting arcs.
  2. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Extend/Trim Arc... command.
  3. Use the Trim/Extend Arc dialog to select the target arc and source arc.
3. Assign Approach Arc properties.
If this is the second arc created on the Bridge Scour coverage, then it will automatically be assigned the "Approach Arc" type. Otherwise, do the following:
  1. Using the Select Feature Arc SMS Select Arc Tool.svg tool, select the Approach Arc.
  2. Right-click and select the Attributes command.
  3. In the Bridge Scour Arc Attributes dialog, assign the Type as "Approach Arc".
3. Create the Centerline Arc.
The centerline arc should follow the path of the flow along the deepest part of the channel.
1. Create feature arcs, nodes and vertices.
In the Map module, create feature objects in the active coverage.
  1. Use the Create Feature Arc SMS Create Arc Tool.svg tool to create arcs in the map coverage.
  2. Begin creating a new arc by clicking in the Graphics Window at either arc end. If clicking on an existing feature node, vertex or arc, the new arc will snap to that object.
  3. Double-click or press the Enter key to terminate the arc.
  4. Use the Create Feature Node Create Points Tool.svg tool to create additional nodes alone or to split arcs.
2. Modify arcs.
Feature arcs often need to be edited after initial creation.
1. Create additional vertices on arcs.
  1. Use the Create Feature Vertex SMS Create Vertex Tool.svg tool to add vertices along arcs.
2. Refine the arc shape.
  1. Use the Select Feature Vertex SMS Select Vertex Tool.svg tool and the Select Feature Node SMS Select Node Tool.svg tool to move/edit existing arcs and refine the shape by dragging the nodes/vertices.
  2. Use the Select Feature Arc SMS Select Arc Tool.svg tool to move entire arcs .
3. Split arcs.
An existing arc can be split by:
1. Converting a vertex to a node.
  1. Use the Select Feature Vertex SMS Select Vertex Tool.svg tool and right-click on a vertex along an arc.
  2. Select the Convert to Node command to split the arc into two arcs.
2. Add a node the arc.
  1. Use the Create Feature Node Create Points Tool.svg tool to add a node on an arc in order to split it into two arcs.
3. Add a new connecting arc.
  1. Use the Create Feature Arc SMS Create Arc Tool.svg tool to start or end a new arc on an existing arc to split the existing arc into two arcs.
4. Use the Split Arcs Tool.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Split Arc(s)... command.
  2. Use the Split Arcs Tool to divide arcs.
5. Split overlapping arcs using the Clean Options dialog.
  1. Select overlapping arcs using the Select Feature Arc SMS Select Arc Tool.svg tool.
  2. Use the Feature Objects | Clean command to bring up the Clean Options dialog.
  3. Select the Intersect selected arcs option (for selected arcs) or Intersect arcs option (for all overlapping arcs) to split the arcs.
4. Merge arcs.
Two arcs that share an end node can be merged together.
  1. Select the shared node using the Select Feature Node SMS Select Node Tool.svg tool.
  2. Right-click on the node and select the Convert to Vertex command to merge the arcs.
  3. If desired, the Select Feature Vertex SMS Select Vertex Tool.svg tool can be used to select and delete the new vertex.
5. Smooth arcs.
The variability or roughness of an arc can be reduced.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Smooth Arc(s)... command.
  2. Use the Smooth Arcs Tool to reduce the variability of the arc.
6. Prune arcs.
Concave sections of the arc can be removed.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Prune Arc(s)... command.
  2. Use the Prune Arcs dialog to remove concave sections.
7. Extend/trim arcs.
Extend or shorten an arc to match an existing arc's length.
  1. Using the Select Feature Arc SMS Select Arc Tool.svg tool, select two intersecting arcs.
  2. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Extend/Trim Arc... command.
  3. Use the Trim/Extend Arc dialog to select the target arc and source arc.
3. Assign Centerline Arc properties.
If this is the third arc created on the Bridge Scour coverage, then it will automatically be assigned the "Centerline Arc" type. Otherwise, do the following:
  1. Using the Select Feature Arc SMS Select Arc Tool.svg tool, select the Centerline Arc.
  2. Right-click and select the Attributes command.
  3. In the Bridge Scour Arc Attributes dialog, assign the Type as "Centerline Arc".
4. Create the Bank Arcs.
The bank arcs are created where the contracted and approach sections intersect the main channel banks. Create either two long arcs that follow the banks, or four short arcs that simply intersect one arc at a time.
1. Create feature arcs, nodes and vertices.
In the Map module, create feature objects in the active coverage.
  1. Use the Create Feature Arc SMS Create Arc Tool.svg tool to create arcs in the map coverage.
  2. Begin creating a new arc by clicking in the Graphics Window at either arc end. If clicking on an existing feature node, vertex or arc, the new arc will snap to that object.
  3. Double-click or press the Enter key to terminate the arc.
  4. Use the Create Feature Node Create Points Tool.svg tool to create additional nodes alone or to split arcs.
2. Modify arcs.
Feature arcs often need to be edited after initial creation.
1. Create additional vertices on arcs.
  1. Use the Create Feature Vertex SMS Create Vertex Tool.svg tool to add vertices along arcs.
2. Refine the arc shape.
  1. Use the Select Feature Vertex SMS Select Vertex Tool.svg tool and the Select Feature Node SMS Select Node Tool.svg tool to move/edit existing arcs and refine the shape by dragging the nodes/vertices.
  2. Use the Select Feature Arc SMS Select Arc Tool.svg tool to move entire arcs .
3. Split arcs.
An existing arc can be split by:
1. Converting a vertex to a node.
  1. Use the Select Feature Vertex SMS Select Vertex Tool.svg tool and right-click on a vertex along an arc.
  2. Select the Convert to Node command to split the arc into two arcs.
2. Add a node the arc.
  1. Use the Create Feature Node Create Points Tool.svg tool to add a node on an arc in order to split it into two arcs.
3. Add a new connecting arc.
  1. Use the Create Feature Arc SMS Create Arc Tool.svg tool to start or end a new arc on an existing arc to split the existing arc into two arcs.
4. Use the Split Arcs Tool.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Split Arc(s)... command.
  2. Use the Split Arcs Tool to divide arcs.
5. Split overlapping arcs using the Clean Options dialog.
  1. Select overlapping arcs using the Select Feature Arc SMS Select Arc Tool.svg tool.
  2. Use the Feature Objects | Clean command to bring up the Clean Options dialog.
  3. Select the Intersect selected arcs option (for selected arcs) or Intersect arcs option (for all overlapping arcs) to split the arcs.
4. Merge arcs.
Two arcs that share an end node can be merged together.
  1. Select the shared node using the Select Feature Node SMS Select Node Tool.svg tool.
  2. Right-click on the node and select the Convert to Vertex command to merge the arcs.
  3. If desired, the Select Feature Vertex SMS Select Vertex Tool.svg tool can be used to select and delete the new vertex.
5. Smooth arcs.
The variability or roughness of an arc can be reduced.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Smooth Arc(s)... command.
  2. Use the Smooth Arcs Tool to reduce the variability of the arc.
6. Prune arcs.
Concave sections of the arc can be removed.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Prune Arc(s)... command.
  2. Use the Prune Arcs dialog to remove concave sections.
7. Extend/trim arcs.
Extend or shorten an arc to match an existing arc's length.
  1. Using the Select Feature Arc SMS Select Arc Tool.svg tool, select two intersecting arcs.
  2. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Extend/Trim Arc... command.
  3. Use the Trim/Extend Arc dialog to select the target arc and source arc.
3. Assign Bank Arcs properties.
If this is the fourth and fifth arcs created on the Bridge Scour coverage, then they will automatically be assigned the "Bank Arcs" type. Otherwise, do the following:
  1. Using the Select Feature Arc SMS Select Arc Tool.svg tool, select the Bank Arcs.
  2. Right-click and select the Attributes command.
  3. In the Bridge Scour Arc Attributes dialog, assign the Type as "Bank Arcs".
5. Create the Abutment Toe Arcs.
The abutment toe arcs intersect the contracted arc at the toe of the abutment. These arcs should be approximately the width of the bridge.
1. Create feature arcs, nodes and vertices.
In the Map module, create feature objects in the active coverage.
  1. Use the Create Feature Arc SMS Create Arc Tool.svg tool to create arcs in the map coverage.
  2. Begin creating a new arc by clicking in the Graphics Window at either arc end. If clicking on an existing feature node, vertex or arc, the new arc will snap to that object.
  3. Double-click or press the Enter key to terminate the arc.
  4. Use the Create Feature Node Create Points Tool.svg tool to create additional nodes alone or to split arcs.
2. Modify arcs.
Feature arcs often need to be edited after initial creation.
1. Create additional vertices on arcs.
  1. Use the Create Feature Vertex SMS Create Vertex Tool.svg tool to add vertices along arcs.
2. Refine the arc shape.
  1. Use the Select Feature Vertex SMS Select Vertex Tool.svg tool and the Select Feature Node SMS Select Node Tool.svg tool to move/edit existing arcs and refine the shape by dragging the nodes/vertices.
  2. Use the Select Feature Arc SMS Select Arc Tool.svg tool to move entire arcs .
3. Split arcs.
An existing arc can be split by:
1. Converting a vertex to a node.
  1. Use the Select Feature Vertex SMS Select Vertex Tool.svg tool and right-click on a vertex along an arc.
  2. Select the Convert to Node command to split the arc into two arcs.
2. Add a node the arc.
  1. Use the Create Feature Node Create Points Tool.svg tool to add a node on an arc in order to split it into two arcs.
3. Add a new connecting arc.
  1. Use the Create Feature Arc SMS Create Arc Tool.svg tool to start or end a new arc on an existing arc to split the existing arc into two arcs.
4. Use the Split Arcs Tool.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Split Arc(s)... command.
  2. Use the Split Arcs Tool to divide arcs.
5. Split overlapping arcs using the Clean Options dialog.
  1. Select overlapping arcs using the Select Feature Arc SMS Select Arc Tool.svg tool.
  2. Use the Feature Objects | Clean command to bring up the Clean Options dialog.
  3. Select the Intersect selected arcs option (for selected arcs) or Intersect arcs option (for all overlapping arcs) to split the arcs.
4. Merge arcs.
Two arcs that share an end node can be merged together.
  1. Select the shared node using the Select Feature Node SMS Select Node Tool.svg tool.
  2. Right-click on the node and select the Convert to Vertex command to merge the arcs.
  3. If desired, the Select Feature Vertex SMS Select Vertex Tool.svg tool can be used to select and delete the new vertex.
5. Smooth arcs.
The variability or roughness of an arc can be reduced.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Smooth Arc(s)... command.
  2. Use the Smooth Arcs Tool to reduce the variability of the arc.
6. Prune arcs.
Concave sections of the arc can be removed.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Prune Arc(s)... command.
  2. Use the Prune Arcs dialog to remove concave sections.
7. Extend/trim arcs.
Extend or shorten an arc to match an existing arc's length.
  1. Using the Select Feature Arc SMS Select Arc Tool.svg tool, select two intersecting arcs.
  2. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Extend/Trim Arc... command.
  3. Use the Trim/Extend Arc dialog to select the target arc and source arc.
3. Assign Abutment Toe Arcs properties.
If this is the sixth and seventh arcs created on the Bridge Scour coverage, then they will automatically be assigned the "Abutment Toe Arcs" type. Otherwise, do the following:
  1. Using the Select Feature Arc SMS Select Arc Tool.svg tool, select the Abutment Toe Arcs.
  2. Right-click and select the Attributes command.
  3. In the Bridge Scour Arc Attributes dialog, assign the Type as "Abutment Toe Arcs".
6. Create the Pier Arcs, if applicable.
The arc begins at the center of the upstream edge of the pier and terminates at the center of the downstream edge of the pier. The arc length should be equal to the length of the pier.
1. Create feature arcs, nodes and vertices.
In the Map module, create feature objects in the active coverage.
  1. Use the Create Feature Arc SMS Create Arc Tool.svg tool to create arcs in the map coverage.
  2. Begin creating a new arc by clicking in the Graphics Window at either arc end. If clicking on an existing feature node, vertex or arc, the new arc will snap to that object.
  3. Double-click or press the Enter key to terminate the arc.
  4. Use the Create Feature Node Create Points Tool.svg tool to create additional nodes alone or to split arcs.
2. Modify arcs.
Feature arcs often need to be edited after initial creation.
1. Create additional vertices on arcs.
  1. Use the Create Feature Vertex SMS Create Vertex Tool.svg tool to add vertices along arcs.
2. Refine the arc shape.
  1. Use the Select Feature Vertex SMS Select Vertex Tool.svg tool and the Select Feature Node SMS Select Node Tool.svg tool to move/edit existing arcs and refine the shape by dragging the nodes/vertices.
  2. Use the Select Feature Arc SMS Select Arc Tool.svg tool to move entire arcs .
3. Split arcs.
An existing arc can be split by:
1. Converting a vertex to a node.
  1. Use the Select Feature Vertex SMS Select Vertex Tool.svg tool and right-click on a vertex along an arc.
  2. Select the Convert to Node command to split the arc into two arcs.
2. Add a node the arc.
  1. Use the Create Feature Node Create Points Tool.svg tool to add a node on an arc in order to split it into two arcs.
3. Add a new connecting arc.
  1. Use the Create Feature Arc SMS Create Arc Tool.svg tool to start or end a new arc on an existing arc to split the existing arc into two arcs.
4. Use the Split Arcs Tool.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Split Arc(s)... command.
  2. Use the Split Arcs Tool to divide arcs.
5. Split overlapping arcs using the Clean Options dialog.
  1. Select overlapping arcs using the Select Feature Arc SMS Select Arc Tool.svg tool.
  2. Use the Feature Objects | Clean command to bring up the Clean Options dialog.
  3. Select the Intersect selected arcs option (for selected arcs) or Intersect arcs option (for all overlapping arcs) to split the arcs.
4. Merge arcs.
Two arcs that share an end node can be merged together.
  1. Select the shared node using the Select Feature Node SMS Select Node Tool.svg tool.
  2. Right-click on the node and select the Convert to Vertex command to merge the arcs.
  3. If desired, the Select Feature Vertex SMS Select Vertex Tool.svg tool can be used to select and delete the new vertex.
5. Smooth arcs.
The variability or roughness of an arc can be reduced.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Smooth Arc(s)... command.
  2. Use the Smooth Arcs Tool to reduce the variability of the arc.
6. Prune arcs.
Concave sections of the arc can be removed.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Prune Arc(s)... command.
  2. Use the Prune Arcs dialog to remove concave sections.
7. Extend/trim arcs.
Extend or shorten an arc to match an existing arc's length.
  1. Using the Select Feature Arc SMS Select Arc Tool.svg tool, select two intersecting arcs.
  2. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Extend/Trim Arc... command.
  3. Use the Trim/Extend Arc dialog to select the target arc and source arc.
3. Assign Pier Arcs properties.
If this is the eighth or later arc created on the Bridge Scour coverage, then it will automatically be assigned the "Pier Arcs" type. Otherwise, do the following:
  1. Using the Select Feature Arc SMS Select Arc Tool.svg tool, select the Pier Arcs.
  2. Right-click and select the Attributes command.
  3. In the Bridge Scour Arc Attributes dialog, assign the Type as "Pier Arcs" and enter the "Pier Width" value.
4. Define bridge scour coverage properties.
1. Open the Bridge Scour Coverage Properties dialog.
  1. Right-click on the Bridge Scour coverage in the Project Explorer and select the Custom Properties command.
2. Define the gradation.
  1. In the Bridge Scour Coverage Properties dialog, select the Define Soil Gradation button.
  2. Enter gradation in the Bridge Scour Soil Gradation dialog.
3. Select the mesh.
  1. In the Bridge Scour Coverage Properties dialog, select the 2D Mesh to use which will define which datasets are available.
4. Define scenarios.
  1. In the Bridge Scour Coverage Properties dialog, click Add Scenario Add button.png.
  2. In the Edit Bridge Scour Scenario dialog, enter the scenario name and select datasets for the following:
    • Water Surface Elevations
    • Water Depth
    • Water Velocity
5. Model Specifications.
In the Bridge Scour Coverage Properties dialog:
  1. Select the Contraction Scour Variable Extraction Approach as either "Streamlines" or "Bank Width Ratios".
  2. Select the NCHRP Abutment Scour Condition as either "Type a" or "Type b".
6. Set advanced options if needed.
  1. In the Bridge Scour Coverage Properties dialog, select the Edit Advanced Options button.
  2. Define advanced options in the Bridge Scour Advanced Options dialog.
5. Compute and export scour values to the Hydraulic Toolbox.
In the Bridge Scour Coverage Properties dialog:
  1. Enter the Output Filename and Browse to the desired location.
  2. Click the View Values button to generate a preview of the values to be exported.
  3. Click Export Hydraulic Toolbox File to create the bridge scour file.