Search results

Page title matches

• WMS:DEM Files
  ...e recalled later without having to perform the same processing steps. The DEM file format is shown in Figure 1 and a sample file is shown in Figure 2. |DEM||/* File type identifier */
  4 KB (505 words) - 16:27, 15 January 2016
• WMS:ArcView DEM Files
  41 bytes (5 words) - 18:17, 28 August 2013

Page text matches

• WMS:DEM File
  #REDIRECT [[WMS:DEM Files]]
  27 bytes (4 words) - 17:40, 26 July 2013
• WMS:DEM Cards
  #REDIRECT [[WMS:DEM Files]]
  27 bytes (4 words) - 17:40, 26 July 2013
• WMS:WMS Native Files
  ...e files native to (determined by) WMS can be accessed from the list below. Files which are used by analysis codes such as HEC-1 are not documented here sinc Most of the files used by WMS have a card type format. With this format, the different compon
  2 KB (290 words) - 16:44, 17 February 2014
• WMS:DEM Data Workflow
  !style="text-align:left;"|1. Import DEM. {{WMS Import DEM Workflow}}
  1 KB (175 words) - 22:20, 9 December 2019
• WMS:Editing DEMs
  [[Image:WMS DEM Trim by Elevation.png|thumb|225 px|''DEM Trim by Elevation'' dialog]] ...draulic model so it is convenient to be able to trim away the parts of the DEM that are not needed.
  3 KB (417 words) - 16:59, 9 August 2022
• WMS:Importing Flow Directions and Accumulations
  ...integer value for each DEM point that represents the number of “upstream” DEM points whose flow path passes through it. High accumulation values indicate ...ing DEM points has the lowest elevation. The flow direction value for that DEM point is then assigned an integer number representing the given direction.
  3 KB (489 words) - 23:30, 16 December 2019
• WMS:WMS Project Files
  ...iles such as DXF, and HEC-1 files can be included in order to maintain all files pertaining to a given project together. ...iles such as DXF, and HEC-1 files can be included in order to maintain all files pertaining to a given project together.
  2 KB (391 words) - 15:19, 16 September 2014
• WMS:Converting DEMs
  DEM files can be converted by WMS into TINs or feature objects. ===All DEM Points===
  3 KB (450 words) - 22:42, 17 December 2019
• GMS:Importing Non-native GMS Files
  ...import many files generated by other software in their native format. The files that can be imported to GMS are shown in the tables below. Each file type ...ening the super file will import the entire model and all associated model files. This will NOT open any GMS specific data, such as Map data or TIN data et
  2 KB (354 words) - 22:11, 1 May 2017
• WMS:DEM Files
  ...e recalled later without having to perform the same processing steps. The DEM file format is shown in Figure 1 and a sample file is shown in Figure 2. |DEM||/* File type identifier */
  4 KB (505 words) - 16:27, 15 January 2016
• GMS:Importing USGS DEMs
  ...ed in the small graphics window in the center of the dialog. As additional files are added the graphics region is updated with new rectangles in order to pr ...f the DEM files which have been added to this point. By default when a new DEM file is added the bounding rectangle is adjusted to enclose all DEMs.
  5 KB (785 words) - 22:32, 16 December 2019
• WMS:Importing USGS DEMs
  ...ed in the small graphics window in the center of the dialog. As additional files are added the graphics region is updated with new rectangles in order to pr ...f the DEM files which have been added to this point. By default when a new DEM file is added the bounding rectangle is adjusted to enclose all DEMs.
  5 KB (794 words) - 22:32, 16 December 2019
• WMS:TOPAZ
  ...r use in basin delineation with DEMs. However, TOPAZ is capable of further DEM elevation processing, including raster smoothing, basin and stream delineat ...Modeling Wizard'']], the '''Compute TOPAZ''' command will save the current DEM elevations to a TOPAZ formatted input file along with a TOPAZ control file
  4 KB (558 words) - 18:47, 8 November 2023
• WMS:Quick Tour - TINs
  ...p in the process is to obtain elevation data. Elevations can come from DEM files, digitized data, or any other scattered xyz data source.
  491 bytes (73 words) - 15:49, 11 April 2017
• SMS:Generic Vector/Raster Files
  There are several kinds of vector files and many kinds of raster files that are automatically identified and read into SMS. These kinds of vector files include:
  1 KB (218 words) - 21:39, 5 September 2018
• WMS:ArcView Data Guidelines
  ==Grid (DEM) Files== ...g watershed parameters can be developed directly within WMS. The elevation DEM may also be used as the background elevation map used when creating a TIN.
  4 KB (685 words) - 15:47, 2 February 2016
• SMS:Importing Non-native SMS Files
  ...import many files generated by other software in their native format. The files that can be imported to SMS are shown in the tables below. Each file type i ...the simulation file will import the entire model and all associated model files. This will NOT open any SMS specific data, such as Map data or TIN data et
  4 KB (550 words) - 14:58, 26 June 2018
• WMS:DEM Guidelines
  ...nsional array of elevation points with a constant x and y spacing. While a DEM results in data redundancy for surface definition, its simple data structur ...eighboring (in a structured grid there are eight neighbors for each point) DEM point with the lowest elevation. The algorithms typically include functiona
  6 KB (976 words) - 22:52, 12 May 2020
• WMS:WMS Non-native Files
  The following table identifies the different kinds of files that can be imported (now opened) into WMS, along with the typical three le ...information see the article [[WMS:CAD Data#Opening CAD Files|importing DXF Files]].
  6 KB (1,032 words) - 15:42, 24 February 2016
• GMS:File Menu
  ...This command is used to read in project files and to import data or other files generated outside of GMS. ...the ''Get Online Maps'' dialog. Allows importing data such as imagery and DEM data from the internet. Downloaded data through this method is dynamic, req
  4 KB (607 words) - 22:39, 10 March 2022