User:Rcorrigan/AHGW Pro:Transform Raster to XS2D Line
From XMS Wiki
Jump to navigationJump to search
The Transform Raster to XS2D Line tool is accessed by double-clicking on " Transform Raster to XS2D Line" under the " XS2D Editor" toolset under the " Subsurface Analyst" toolset under the " ArcHydroGroundwater.pyt" toolbox. This tool creates XS2D line features from SectionLine features and a raster. Raster values are sampled along a SectionLine and then transformed to a XS2D Line.
- ArcGIS Notes – In older versions of ArcGIS, this tool is accessed through the "Arc Hydro Groundwater Tools" toolbox. The tool appears as a dialog, not a pane.
- The icons vary between ArcGIS and ArcGIS Pro.
- The names of the fields in this tool might be different in ArcGIS. They should still be recognizable.
The following fields are available. Required fields are marked with a icon. In ArcGIS, they are marked with a icon. Fields marked with a icon may not be supported or the table may not exist.
- Input Section Line Features – Click the button to bring up the Input Section Line Features dialog in order to specify the input line features representing section lines. The tool can be applied to a selection of SectionLine features. If no features are selected, the tool will be applied to all features in the SectionLine feature class.
- Input Raster – Click the button to bring up the Input Raster dialog in order to specify the input raster.
- Input XS2D_Catalog Table – Click the button to bring up the Input XS2D_Catalog Table dialog in order to specify the XS2D_Catalog table as defined by the Arc Hydro Groundwater Data Model. This table stores information relating to XS2D feature classes.
- XS2DType – Select from the drop-down the XS2DType value in the XS2D_Catalog table. For each SectionLine the associated Feature Class Name (XS2D_FC) will be located based on the SectionID and the XS2DType values.
- Discretization Spacing – Optional. Enter the input raster as sampled at the specified spacing along the SectionLine feature. The raster resolution is the default spacing and will be used if the parameter is empty.
- FType value of the features to create – Optional. Enter the feature type to assign to the line created by the tool.
- Overwrite Existing XS2D Line Features – Optional. Turn on to append new XS2D_Lines to the existing feature class. Turn off to clear the target feature class prior to creating new XS2D_Lines.