GMS:Borehole Commands: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 16: Line 16:
| colspan="2" |
| colspan="2" |
|-
|-
| [[GMS:Creating_and_Editing_Boreholes|Auto Select Contacts/Segments]]... || When one contact or segment is selected, automatically selects matching contacts or segments on other boreholes.
| [[GMS:Creating_and_Editing_Boreholes#Auto_Select|Auto Select Contacts/Segments]]... || When one contact or segment is selected, automatically selects matching contacts or segments on other boreholes.
|-
|-
| Auto-Create Blank Cross Sections... ||  
| Auto-Create Blank Cross Sections... ||  

Revision as of 18:31, 29 August 2012

Template:Infobox GMS Menus "Boreholes" menu in the Boreholes Module.

Menu Command Description
New Borehole Creates a new Borehole.
Borehole Editor... Opens the Borehole Editor.
Cross Section Editor... Brings up the Cross Section Editor dialog where one or multiple 2D cross sections between boreholes are filled.
Lock All Boreholes Turns off the ability to change the position (drag) of created boreholes.
Auto Select Contacts/Segments... When one contact or segment is selected, automatically selects matching contacts or segments on other boreholes.
Auto-Create Blank Cross Sections...
Auto-Assign Horizons...
Auto-Fill Blank Cross Sections...
Horizons -> Solids... Opens the Horizons to Solids wizard which can be used to create solids from a combination of boreholes, TINs and conceptual models.
Horizons -> 3D Mesh... Opens the Horizons to Mesh wizard which can be used to create a 3D mesh from a combination of boreholes, TINs and conceptual models.
Advanced >
HGUs -> Soils
Soils -> HGUs
Snap Cross Sections to TIN
Add Contacts to TIN
Bounding 3D Grid...
Contacts -> TIN
Contacts -> 2D Scatter Points...
Watertable -> 2D Scatter Points...
Sample Data -> 3D Scatter Points...
Sample Data -> Stratigraphy
Horizons -> HUF Opens the Horizons -> HUF wizard to create MODFLOW HUF data from TINs and boreholes. TINs or boreholes with horizon data defined are required, along with a MODFLOW simulation which uses the HUF package.