SMS:ADH Sediment Library Control: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 18: Line 18:


====Sediment Bed Layers Dialog====
====Sediment Bed Layers Dialog====
[[File:ADH SedimentBedLayers.jpg|thumb|''Sediment Bed Layers'' dialog]]
[[File:ADH SedimentBedLayers.jpg|thumb|500 px|''Sediment Bed Layers'' dialog]]
The ''Sediment Bed Layers'' dialog permits changing bed layer values. The following values can be viewed or changed:
The ''Sediment Bed Layers'' dialog permits changing bed layer values. The following values can be viewed or changed:
* ''Layer'' – gives the layer name. Changes to this field will not be saved. Layers are ordered with the lowest layer number at the bottom.
* ''Layer'' – gives the layer name. Changes to this field will not be saved. Layers are ordered with the lowest layer number at the bottom.

Revision as of 20:12, 27 May 2015

The ADH Sediment Library Control dialog showing the Global Material Sed. Props. tab

The ADH Sediment Library Control contains the graphical prompts for specifying model options. The dialog is accessed through the ADH | Sediment Library Control menu item.

To make use of the ADH Sediment Library Control, it is required that the ADH model be in metric units. Otherwise, the model will encounter an error.

Dialog Description

Consolidation

See ADH Consolidation for more information.

Transport Constituents

See ADH Transport Constituents for more information.

Global Materials Sed Props

The Global Materials Sediment Properties tab lets the user set the number of of bed layers. Once the Number of bed layers field has been completed, the Sediment Bed Layers... button will become active. Clicking this button will bring up the Sediment Bed Layers dialog.

See ADH Sediment Transport and Bed Layers for more information.

Sediment Bed Layers Dialog

Sediment Bed Layers dialog

The Sediment Bed Layers dialog permits changing bed layer values. The following values can be viewed or changed:

  • Layer – gives the layer name. Changes to this field will not be saved. Layers are ordered with the lowest layer number at the bottom.
  • Distribution – this button will open the Distribution dialog. In the Distribution dialog, the material percentages in the bed layer can be adjusted.
  • Thickness (m) – the thickness of the bed layer given in meters.
  • Bulk Denisity
  • Erosion crit. shear
  • Erosion rate constant
  • Erosion rate exponent

Sediment Properties

ADH Sediment Library Control dialog showing the Sediment Properties tab

This tab has five options.

  • Non-cohesive sediment entrainment

    Values of Option include: "Garcia-Parker", "Wright-Parker", "Van Rijn" or "C2Shore". When this option is selected it will write out the SP NSE card.

  • Non-cohesive bedload entrainment

    Values of Option include: "Van Rijn", "Meyer Peter Mueller", "Meyer Peter Mueller w/Wong Parker Correction", or "C2Shore". When this option is selected it will write out the SP NBE card.

  • Non-cohesive hiding factor

    Values of Option include: "Karim Holly Yang" or "Egiazaroff". When this option is selected it will write out the SP HID card.

  • Cohesive settling velocity

    Values of Option include: "Free settling" or "Hwang and Mehta". When this option is selected it will write out the SP CSV card.

  • Bed shear stress due to wind wave

    Values of Option include: "No applied wind-wave stress", "Grand and Madsen", or "Teeter". When this option is selected it will write out the SP WWS card.

CS2SHORE Sediment

This tab has ten options.

  • Median sediment grain size with card SP C2SD50
  • Breaking efficiency with card SP C2SEB
  • Bottom dissipation efficiency with card SP C2SEF
  • Bed porosity with card SP C2SBP
  • Sediment fall velocity with card SP C2SWF
  • Sediment specific gravity with card SP C2SSG
  • Suspended load parameter with card SP C2SSL
  • Wave-related bed load parameter with card SP C2SBLW
  • Current-related bed load parameter with card SP C2SBLC
  • Wave friction factor with card SP C2SFW

Related Topics