SMS:Model Specific Coverages: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 12: Line 12:
</blockquote>
</blockquote>
* [[SMS:BOUSS-2D|BOUSS2D]] &ndash; used to build feature objects and parameters for a BOUSS-2D model simulation.
* [[SMS:BOUSS-2D|BOUSS2D]] &ndash; used to build feature objects and parameters for a BOUSS-2D model simulation.
* [[SMS:BOUSS Runup / Overtopping|BOUSS Runup/Overtopping]] &ndash; uses multiple coverages to create the model simulation. The coverages are:  
* [[SMS:BOUSS Runup / Overtopping|BOUSS Runup/Overtopping]] &ndash; uses multiple coverages to create the Runup/Overtopping model simulation. The coverages are:  
<blockquote>
<blockquote>
*Damping
*Damping
Line 35: Line 35:
* [[SMS:Generic Cartesian Grid Coverage|Generic Cartesian Grid Coverage]]
* [[SMS:Generic Cartesian Grid Coverage|Generic Cartesian Grid Coverage]]
* [[SMS:PTM|PTM]] &ndash; allows simulating particle transport processes.
* [[SMS:PTM|PTM]] &ndash; allows simulating particle transport processes.
* [[SMS:SED-ZLJ|SED-ZLJ]] &ndash; sediment model used with the EFDC coverage.  
* [[SMS:SED-ZLJ|SED-ZLJ]] &ndash; sediment model used with the EFDC coverage.
* [[SMS:SRH Coverages|SRH-2D]] &ndash; uses multiple coverages to create the SRH model simulation. The coverages are:
<blockquote>
* Boundary Conditions
* Obstructions
* Monitor Points
* Materials
</blockquote>
* [[SMS:STWAVE|STWAVE]] &ndash; used to build a conceptual model of a STWAVE project.
* [[SMS:STWAVE|STWAVE]] &ndash; used to build a conceptual model of a STWAVE project.
* [[SMS:TABS|TABS (RMA2/RMA4)]] &ndash; used to build a conceptual model for a RMA2 or RMA4 project.
* [[SMS:TABS|TABS (RMA2/RMA4)]] &ndash; used to build a conceptual model for a RMA2 or RMA4 project.

Revision as of 15:58, 25 June 2015

Specific model coverage can be selected by right-clicking on the map module data and selecting Type | Models.

  • ADH – used to build a conceptual model of an ADH project.
  • Vessel – used to add vessels to the simulation and give them paths to follow.
  • BOUSS2D – used to build feature objects and parameters for a BOUSS-2D model simulation.
  • BOUSS Runup/Overtopping – uses multiple coverages to create the Runup/Overtopping model simulation. The coverages are:
  • Damping
  • Probes
  • Roughness
  • Transects
  • Wavemaker
  • CGWAVE – used to build a conceptual model of a CGWAVE project.
  • CMS-Flow – utilize two different coverage types.
  • Boundary Conditions – used to create the computational domain (or grid).
  • Save Points – used to define special output locations from the computation.
  • CMS-Wave – used to build a conceptual model of a CMS-Wave project.
  • CSHORE – used to build a conceptual model of a CSHORE project.
  • EFDC – used to create curvilinear grids for use with the EFDC model (EFDC grid format).
  • ESMF – used to couple ADCIRC and STWAVE models.
  • FESWMS – used to build a conceptual model of a FESWMS project.
  • GenCade – used to build a conceptual model of a GenCade project.
  • Generic Mesh Coverage
  • Generic Cartesian Grid Coverage
  • PTM – allows simulating particle transport processes.
  • SED-ZLJ – sediment model used with the EFDC coverage.
  • SRH-2D – uses multiple coverages to create the SRH model simulation. The coverages are:
  • Boundary Conditions
  • Obstructions
  • Monitor Points
  • Materials
  • STWAVE – used to build a conceptual model of a STWAVE project.
  • TABS (RMA2/RMA4) – used to build a conceptual model for a RMA2 or RMA4 project.
  • TUFLOW Coverages – used to create feature objects for a TUFLOW simulation. Includes several coverages.
  • 1D Cross Sections – used to define open channel cross section data for 1D networks.
  • 1D Networks – used to create channels and nodes for a 1D domain.
  • 1D Water Level Lines – define the locations where 1D solutions will be written as 2D output.
  • 1D Water Level Points – used in conjunction with water level lines to guide TUFLOW on creating 2D output for 1D networks.
  • 1D/2D BCs and Links – used to specify cell code (active/inactive) areas of the 2D model domain.
  • 1D/2D Connections – used with the 2D BC coverage to link 2D and 1D domains.
  • 2D Flow Constriction Shapes – used to define flow constrictions in TUFLOW.
  • 2D Flow Constriction (cell based)
  • 2D Grid Extents – used to create TUFLOW grids.
  • 2D Materials – used to assign material data for use in the TUFLOW simulation.
  • 2D Miscellaneous (FLC, WRF, IWL, SRF, and AD)
  • 2D Z Lines (advanced) – modifies geometry through time to simulate levee failures or other changes to elevation data within the model run.
  • 2D Z Lines/Polygons (simple) – used as geometry modifications and force grid elevation values using arcs or polygons.
  • 2D/2D Linkages – used to setup TUFLOW to use multiple 2D domains.
  • WAM – used to build a conceptual model of a WAM project.
  • Wind
  • Holland/PBL – used to create a storm track for PBL project for use in ADCIRC.
  • Synthetic Storm – provides a mechanism for creating a PBL coverage based upon user specified parameters.

Related Topics