GMS:Converting 2D Scatter Points to Other Types of Data
From XMS Wiki
2D Scatter Points may be converted to other types of data used in GMS, such as a TIN, 2D Mesh Nodes, or Observation Points. 2D Scatter Points are converted by using the following commands in the Scatter Points menu:
- Scatter Points → TIN
- The Scatter Points → TIN command creates a set of TIN vertices. These vertices are automatically triangulated to form a TIN.
- Scatter Points → Mesh Nodes
- The Scatter Points → Mesh Nodes command creates a set of 2D finite element nodes from the points in the active scatter point set.
- Scatter Points → Obs. Pts.
- The Scatter Points → Obs. Pts command creates one observation point for each of the scatter points in the active scatter point set. The active dataset values become the measured values for the observation points. The user must create a coverage with a measurement before executing this command.
This contains information about functionality available at GMS version 8.3. The content may not apply to other versions. |
- Scatter Points → 3D Scatter Points
- The Scatter Points → 3D Scatter Points command creates a 3D scatter point set from the 2D scatter points. All of the datasets are copied to the 3D scatter points. The Z (elevation) of the 3D scatter points is set to the Z of the 2D scatter points at the time of conversion.
GMS – Groundwater Modeling System | ||
---|---|---|
Modules: | 2D Grid • 2D Mesh • 2D Scatter Point • 3D Grid • 3D Mesh • 3D Scatter Point • Boreholes • GIS • Map • Solid • TINs • UGrids | |
Models: | FEFLOW • FEMWATER • HydroGeoSphere • MODAEM • MODFLOW • MODPATH • mod-PATH3DU • MT3DMS • MT3D-USGS • PEST • PHT3D • RT3D • SEAM3D • SEAWAT • SEEP2D • T-PROGS • ZONEBUDGET | |
Aquaveo |