To generate a summary table in SMS, use the following steps:
1. Import or create a centerline.
|
- Either import a centerline arc or create a new centerline.
1. Importing centerline data.
|
- Files containing a centerline arc and bank arcs can be imported into the Map module.
- Select File | Open to import the file data.
- Check that the data has been imported into the Map module.
- Check that the map coverage containing the arcs has been set to the 1D-Hyd Centerline type.
|
2. Creating a centerline arc.
|
1. Create a 1D-Hydraulic Centerline coverage.
|
- Create a new coverage with the "1D-Hyd Centerline" type.
1. Create new coverage from scratch.
|
- Select Map Data in the Project Explorer and use the New Coverage right-click command.
- Use the New Coverage dialog to create a new coverage by selecting the desired coverage type, and naming the coverage.
|
2. Create new coverage from an existing coverage.
|
- Use the Duplicate command on an existing coverage. This will copy any feature objects on the coverage.
- Use the Rename command to give the coverage a new name.
- Change the coverage type.
|
|
2. Creating a centerline arc.
|
- Draw a channel centerline arc from upstream to downstream (direction is important) along the desired reach.
1. Create an arc representing the centerline.
|
1. Create feature arcs, nodes and vertices.
|
- In the Map module, create feature objects in the active coverage.
- Use the Create Feature Arc tool to create arcs in the map coverage.
- Begin creating a new arc by clicking in the Graphics Window at either arc end. If clicking on an existing feature node, vertex or arc, the new arc will snap to that object.
- Double-click or press the Enter key to terminate the arc.
- Use the Create Feature Node tool to create additional nodes alone or to split arcs.
|
2. Modify arcs.
|
- Feature arcs often need to be edited after initial creation.
3. Split arcs.
|
- An existing arc can be split by:
2. Add a node the arc.
|
- Use the Create Feature Node tool to add a node on an arc in order to split it into two arcs.
|
3. Add a new connecting arc.
|
- Use the Create Feature Arc tool to start or end a new arc on an existing arc to split the existing arc into two arcs.
|
|
4. Merge arcs.
|
- Two arcs that share an end node can be merged together.
- Select the shared node using the Select Feature Node tool.
- Right-click on the node and select the Convert to Vertex command to merge the arcs.
- If desired, the Select Feature Vertex tool can be used to select and delete the new vertex.
|
|
|
2. Assign attributes to the centerline arc.
|
- Using the Select Feature Arc tool, select the centerline arc.
- Right-click and select the Attributes... command.
- In the River Reach Attributes dialog, assign the centerline type and other attributes as needed.
|
|
3. Create overbank arcs. (Optional)
|
- Draw additional arcs to delineate each channel bankline.
1. Create arcs representing the banks.
|
1. Create feature arcs, nodes and vertices.
|
- In the Map module, create feature objects in the active coverage.
- Use the Create Feature Arc tool to create arcs in the map coverage.
- Begin creating a new arc by clicking in the Graphics Window at either arc end. If clicking on an existing feature node, vertex or arc, the new arc will snap to that object.
- Double-click or press the Enter key to terminate the arc.
- Use the Create Feature Node tool to create additional nodes alone or to split arcs.
|
2. Modify arcs.
|
- Feature arcs often need to be edited after initial creation.
3. Split arcs.
|
- An existing arc can be split by:
2. Add a node the arc.
|
- Use the Create Feature Node tool to add a node on an arc in order to split it into two arcs.
|
3. Add a new connecting arc.
|
- Use the Create Feature Arc tool to start or end a new arc on an existing arc to split the existing arc into two arcs.
|
|
4. Merge arcs.
|
- Two arcs that share an end node can be merged together.
- Select the shared node using the Select Feature Node tool.
- Right-click on the node and select the Convert to Vertex command to merge the arcs.
- If desired, the Select Feature Vertex tool can be used to select and delete the new vertex.
|
|
|
2. Assign attributes to the bank arcs.
|
- Using the Select Feature Arc tool, select the bank arc.
- Right-click and select the Attributes... command.
- In the River Reach Attributes dialog, assign the bank type and other attributes as needed.
|
|
|
|
2. Import or generate cross sections.
|
1. Importing cross section data.
|
- Files containing a cross section arcs can be imported into the Map module.
- Select File | Open to import the file data.
- Check that the data has been imported into the Map module.
- Check that the map coverage containing the arcs has been set to the 1D-Hyd Cross Section type.
|
2. Creating a cross sections.
|
1. Create a 1D-Hydraulic Cross Section coverage.
|
- Create a new coverage with the "1D-Hyd Cross Section" type.
1. Create new coverage from scratch.
|
- Select Map Data in the Project Explorer and use the New Coverage right-click command.
- Use the New Coverage dialog to create a new coverage by selecting the desired coverage type, and naming the coverage.
|
2. Create new coverage from an existing coverage.
|
- Use the Duplicate command on an existing coverage. This will copy any feature objects on the coverage.
- Use the Rename command to give the coverage a new name.
- Change the coverage type.
|
|
2. Creating a cross section arcs.
|
1. Create arcs in cross section locations.
|
- Draw cross section arcs that intersect the channel centerline.
1. Create feature arcs, nodes and vertices.
|
- In the Map module, create feature objects in the active coverage.
- Use the Create Feature Arc tool to create arcs in the map coverage.
- Begin creating a new arc by clicking in the Graphics Window at either arc end. If clicking on an existing feature node, vertex or arc, the new arc will snap to that object.
- Double-click or press the Enter key to terminate the arc.
- Use the Create Feature Node tool to create additional nodes alone or to split arcs.
|
2. Modify arcs.
|
- Feature arcs often need to be edited after initial creation.
3. Split arcs.
|
- An existing arc can be split by:
2. Add a node the arc.
|
- Use the Create Feature Node tool to add a node on an arc in order to split it into two arcs.
|
3. Add a new connecting arc.
|
- Use the Create Feature Arc tool to start or end a new arc on an existing arc to split the existing arc into two arcs.
|
|
4. Merge arcs.
|
- Two arcs that share an end node can be merged together.
- Select the shared node using the Select Feature Node tool.
- Right-click on the node and select the Convert to Vertex command to merge the arcs.
- If desired, the Select Feature Vertex tool can be used to select and delete the new vertex.
|
|
|
|
|
|
3. Import model solution sets.
|
- If a model solution set has not already been loaded into the project, complete the following:
- Use the File | Open menu command to import the solution file.
|
4. Generate a summary table.
|
- Right-click on the 1D-Hyd Cross Section coverage in the Project Explorer and select the Summary Table command.
- In the Summary Table Options dialog, select the appropriate data source and datasets for the summary table:
- For the Data Source, select the mesh that contains the results to be summarized.
- Select the Cross section options to determine is the summary table will use a cross section database and which arcs on the centerline coverage to use.
- Select dataset to use from the selected mesh and determine if the Min, Max, and Average will be computed for each dataset.
- Select the desired time step—it defaults to the last time step.
- If selecting Flow and Width calculations, be sure that the appropriate datasets and time steps are set on the left side of the dialog.
- When finished entering parameters, select Generate Table.
- In the Summary Table dialog, review results or copy the values to the clipboard.
|