AHGW:Create XS2D Boreline: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
(Created page with "350px|thumb|right|''Create XS2D Borelines'' dialog The ''Create XS2D Borelines'' tool is accessed by d...")
 
No edit summary
 
Line 1: Line 1:
[[File:AHGW Subsurface Analyst XS2D Editor - Create XS2D Borelines.png|350px|thumb|right|''Create XS2D Borelines'' dialog]]
[[File:ArcGIS Pro Create XS2D BoreLines.png|350px|thumb|right|''Create XS2D BoreLines'' tool in the ''Geoprocessing'' pane]]
The ''Create XS2D Borelines'' tool is accessed by double-clicking on "[[File:ArcGIS Tool icon 10_5.png|14px]] Create XS2D Borelines" under the "[[File:ArcGIS Toolset icon 10_5.png|14px]] XS2D Editor" toolset under the "[[File:ArcGIS Toolset icon 10_5.png|14px]] Subsurface Analyst" toolset under the "[[File:ArcGIS Toolbox icon 10_5.png|14px]] Arc Hydro Groundwater Tools" toolbox. This tool imports boreline features for display on a 2D cross section by reading from a layer of wells and a table of borehole information associated with the wells. The boreline features reveal stratigraphy observed in the wells, and include attributes providing the distance from the section line defining the cross section and the distance along the section line.
The ''Create XS2D BoreLines'' tool is accessed by double-clicking on "[[File:ArcGISPro Toolbx Tool.png|16 px]] Create XS2D BoreLines" under the "[[File:ArcGISPro Toolset.png|16 px]] XS2D Editor" toolset under the "[[File:ArcGISPro Toolset.png|16 px]] Subsurface Analyst" toolset under the "[[File:ArcGISPro Toolbx Item.png|16 px]] ArcHydroGroundwater.pyt" toolbox. This tool imports BoreLine features for display on a 2D cross section by reading from a layer of wells and a table of borehole information associated with the wells. The BoreLine features reveal stratigraphy observed in the wells located along the section line that defines the cross section. They also include attributes that specify the distance from the section line and the distance along it.
 
:'''''ArcGIS Notes''''' – In older versions of ArcGIS, this tool is accessed through the "Arc Hydro Groundwater Tools" toolbox. It appears as a dialog, not a pane.
The following fields are available. Required fields are marked with a [[File:ArcGIS required - green circle icon.png|8px]] icon. Fields marked with a [[File:ArcGIS Error icon.png|10px]] icon may either not be supported or the table doesn't exist.
:The icons vary between ArcGIS and ArcGIS Pro.
*''Input Section Line Layer or Feature Class'' – Click the [[File:ArcGIS Browse button 10_5.png|14px]] button to bring up the ''Input Section Line Layer or Feature Class'' dialog in order to specify the layer or feature class containing the section line defining the cross section for which features are to be created.
:The names of the fields in this tool might be different in ArcGIS. They should still be recognizable.
*[[File:ArcGIS required - green circle icon.png|8px]] ''HydroID of Section Line defining the cross section'' – Enter the numerical ID uniquely identifying the section line feature defining the cross section.
The following fields are available. Required fields are marked with a [[File:ArcGIS Pro Red Required Symbol.png|8 px]] icon. In ArcGIS, they are marked with a [[File:ArcGIS required - green circle icon.png|8px]] icon. Fields marked with a [[File:ArcGIS Pro Warning Red.png|12 px]] icon may not be supported or the table may not exist.
*''Input XS2D_Catalog Table'' – Click the [[File:ArcGIS Browse button 10_5.png|14px]] button to bring up the ''Input XS2D_Catalog Table'' dialog in order to specify the XS2D_Catalog table. The table is defined as part of the [[AHGW:Arc Hydro Groundwater Data Model|Arc Hydro Groundwater Data Model]], and is used to manage XS2D feature classes.
*[[File:ArcGIS Pro Red Required Symbol.png|8 px]] ''Input SectionLine Features'' – Click the [[File:ArcGISPro Open.png|16 px]] button to bring up the ''Input SectionLine Features'' dialog in order to specify the layer or feature class containing the SectionLine that defines the cross section for which features are to be created.
*''Input Well Layer or Feature Class'' – Click the [[File:ArcGIS Browse button 10_5.png|14px]] button to bring up the ''Input Well Layer or Feature Class'' dialog in order to specify the well features for which borelines will be created. If you are using [[ArcMap]], this tool will only use selected features if a selection has been made on the layer.
*[[File:ArcGIS Pro Red Required Symbol.png|8 px]] ''HydroID of Section Line defining the cross section'' – Enter the numerical ID uniquely identifying the SectionLine feature that defines the cross section.
*[[File:ArcGIS Pro Red Required Symbol.png|8 px]] ''Input XS2D_Catalog Table'' – Click the [[File:ArcGISPro Open.png|16 px]] button to bring up the ''Input XS2D_Catalog Table'' dialog in order to specify the XS2D_Catalog table. The table is defined as part of the [[AHGW:Arc Hydro Groundwater Data Model|Arc Hydro Groundwater Data Model]] and is used to manage XS2D feature classes.
*[[File:ArcGIS Pro Red Required Symbol.png|8 px]] ''Input Well Features'' – Click the [[File:ArcGISPro Open.png|16 px]] button to bring up the ''Input Well Features'' dialog in order to specify the well features for which BoreLines will be created.  
:*'''''ArcGIS Feature Note''''' – If you are using [[ArcMap]], this tool will only use selected features if a selection has been made on the layer. This statement applies only to older versions of ArcGIS, not to ArcGIS Pro.
*[[File:ArcGIS Pro Red Required Symbol.png|8 px]] ''Input BoreholeLog Table'' – Click the [[File:ArcGISPro Open.png|16 px]] button to bring up the ''Input BoreholeLog Table'' dialog in order to specify the table that stores vertical measurements defining the stratigraphy for wells. The TopElev and BottomElev fields in this table are used to define the geometry for the output BoreLine features.
*[[File:ArcGIS Pro Red Required Symbol.png|8 px]] ''Input XS2D_Boreline Features'' – Click the [[File:ArcGISPro Open.png|16 px]] button to bring up the ''Input XS2D_Boreline Features'' dialog in order to specify the layer that will store the BoreLine features that are created. If this layer does not already exist, it can be created using the [[AHGW:Create XS2D Boreline Feature Class|Create XS2D Boreline Feature Class]] tool.
*''Overwrite'' – Turn on to clear the target feature class prior to creating new BoreLines. Turn off to append new BoreLines to the target feature class.
*''Well UniqueID field'' – Optional. Select from the drop-down the field specifying the Unique ID (ex. HydroID) of the Well features. This value will be related to the Well ID parameter for the BoreholeLog table. If no field is specified, then the HydroID field will be used.
*''Well UniqueID field'' – Optional. Select from the drop-down the field specifying the Unique ID (ex. HydroID) of the Well features. This value will be related to the Well ID parameter for the BoreholeLog table. If no field is specified, then the HydroID field will be used.
*''Input BoreholeLog Table'' – Click the [[File:ArcGIS Browse button 10_5.png|14px]] button to bring up the ''Input BoreholeLog Table'' dialog in order to specify the table that stores vertical measurements defining the stratigraphy for wells. The TopElev and BottomElev fields in this table are used to define the geometry for the output boreline features.
*''BoreholeLog WellID field'' – Optional. Select from the drop-down the field specifying the Well ID (ex. WellID) of the BoreholeLog table. This value will be related to the Unique ID (ex. HydroID) of the Well features. If no field is specified, then the WellID field will be used.
*''BoreholeLog WellID field'' – Optional. Select from the drop-down the field specifying the Well ID (ex. WellID) of the BoreholeLog table. This value will be related to the Unique ID (ex. HydroID) of the Well features. If no field is specified, then the WellID field will be used.
*''Input XS2D Boreline Layer or Feature Class'' – Click the [[File:ArcGIS Browse button 10_5.png|14px]] button to bring up the ''Input XS2D Boreline Layer or Feature Class'' dialog in order to specify the layer that will store the boreline features that are created. If this layer does not already exist, it can be created using the [[AHGW:Create XS2D Boreline Feature Class|Create XS2D Boreline Feature Class]] tool.
*''Overwrite'' – Turn on to clear the target feature class prior to creating new BoreLines. Turn off to append new BoreLines to the target feature class.




{{Navbox AHGW}}
{{Navbox AHGW}}
[[Category:AHGW Subsurface Analyst]]
[[Category:AHGW Subsurface Analyst]]

Latest revision as of 17:58, 14 April 2023

Create XS2D BoreLines tool in the Geoprocessing pane

The Create XS2D BoreLines tool is accessed by double-clicking on "ArcGISPro Toolbx Tool.png Create XS2D BoreLines" under the "ArcGISPro Toolset.png XS2D Editor" toolset under the "ArcGISPro Toolset.png Subsurface Analyst" toolset under the "ArcGISPro Toolbx Item.png ArcHydroGroundwater.pyt" toolbox. This tool imports BoreLine features for display on a 2D cross section by reading from a layer of wells and a table of borehole information associated with the wells. The BoreLine features reveal stratigraphy observed in the wells located along the section line that defines the cross section. They also include attributes that specify the distance from the section line and the distance along it.

ArcGIS Notes – In older versions of ArcGIS, this tool is accessed through the "Arc Hydro Groundwater Tools" toolbox. It appears as a dialog, not a pane.
The icons vary between ArcGIS and ArcGIS Pro.
The names of the fields in this tool might be different in ArcGIS. They should still be recognizable.

The following fields are available. Required fields are marked with a ArcGIS Pro Red Required Symbol.png icon. In ArcGIS, they are marked with a ArcGIS required - green circle icon.png icon. Fields marked with a ArcGIS Pro Warning Red.png icon may not be supported or the table may not exist.

  • ArcGIS Pro Red Required Symbol.png Input SectionLine Features – Click the ArcGISPro Open.png button to bring up the Input SectionLine Features dialog in order to specify the layer or feature class containing the SectionLine that defines the cross section for which features are to be created.
  • ArcGIS Pro Red Required Symbol.png HydroID of Section Line defining the cross section – Enter the numerical ID uniquely identifying the SectionLine feature that defines the cross section.
  • ArcGIS Pro Red Required Symbol.png Input XS2D_Catalog Table – Click the ArcGISPro Open.png button to bring up the Input XS2D_Catalog Table dialog in order to specify the XS2D_Catalog table. The table is defined as part of the Arc Hydro Groundwater Data Model and is used to manage XS2D feature classes.
  • ArcGIS Pro Red Required Symbol.png Input Well Features – Click the ArcGISPro Open.png button to bring up the Input Well Features dialog in order to specify the well features for which BoreLines will be created.
  • ArcGIS Feature Note – If you are using ArcMap, this tool will only use selected features if a selection has been made on the layer. This statement applies only to older versions of ArcGIS, not to ArcGIS Pro.
  • ArcGIS Pro Red Required Symbol.png Input BoreholeLog Table – Click the ArcGISPro Open.png button to bring up the Input BoreholeLog Table dialog in order to specify the table that stores vertical measurements defining the stratigraphy for wells. The TopElev and BottomElev fields in this table are used to define the geometry for the output BoreLine features.
  • ArcGIS Pro Red Required Symbol.png Input XS2D_Boreline Features – Click the ArcGISPro Open.png button to bring up the Input XS2D_Boreline Features dialog in order to specify the layer that will store the BoreLine features that are created. If this layer does not already exist, it can be created using the Create XS2D Boreline Feature Class tool.
  • Overwrite – Turn on to clear the target feature class prior to creating new BoreLines. Turn off to append new BoreLines to the target feature class.
  • Well UniqueID field – Optional. Select from the drop-down the field specifying the Unique ID (ex. HydroID) of the Well features. This value will be related to the Well ID parameter for the BoreholeLog table. If no field is specified, then the HydroID field will be used.
  • BoreholeLog WellID field – Optional. Select from the drop-down the field specifying the Well ID (ex. WellID) of the BoreholeLog table. This value will be related to the Unique ID (ex. HydroID) of the Well features. If no field is specified, then the WellID field will be used.