GMS:Horizons Wizard

From XMS Wiki
Revision as of 20:37, 6 April 2022 by Jcreer (talk | contribs) (→‎Step 1)
Jump to navigationJump to search
Horizons
HorCoverage.png
Links
Horizons
Horizons to Solids
Horizons to 3D Mesh
Horizons to UGrid
Horizons to HUF
Horizons Wizard
Including Borehole Cross Sections
Raster Catalog
Horizons Conceptual Model
Horizons Applications

The Horizons Wizard is used to create solids, a 3D mesh, or HUF layers from horizon data. The wizard is started via the Horizons → Solids, Horizons → 3D Mesh, Horizons → UGrid, and Horizons → HUF commands. These commands are in the TIN and Boreholes menus.

Step 1

The first step is to define the inputs to be used, which can include boreholes, TINs, and a Horizon Conceptual model.

  • Boreholes – This section contains options for using boreholes.
    • Use boreholes – Specifies to use borehole data in creating the solid or mesh.
    • Use borehole cross sections – Specifies to use borehole cross sectional data in creating the solid or mesh.
    • Representing missing horizons implicitly
    • Use all boreholes – All boreholes in the project will be using in creating the solid or mesh.
    • Select borehole folder – Allows selecting a borehole folder from a list below this option. Only borehole data in the folder will be used.
  • TINs – This section has options for using TINs.
    • Use horizon TINs – Indicates to use available TIN data in creating the solid or mesh.
    • Use all TINs – All TINs in the project will be using in creating the solid or mesh.
    • Select TIN folder – Allows selecting a TIN folder from a list below this option. Only TIN data in the folder will be used.
  • Raster Catalog – The dropdown allows selecting a raster catalog in the project.
  • Conceptual model – This section has options for using horizon conceptual models. The desired conceptual modal can be selected from the list below this option.


The Horizon Elevation step of the Horizons wizard

Step 2

The second step is to define the top and bottom of the solid, mesh, or HUF layers. When creating HUF data, the grid elevations can be edited.

The Top and Bottom Elevations step of the Horizons wizard

Step 3

The third step is to define the interpolation method to be used, as well as options specific to creating solids, a mesh, or HUF package.

Beginning with GMS 7.0, when creating solids, the user can choose the option Preserve projection TIN datasets. This option will create a new TIN that will have a dataset for each horizon. This is often useful so that the user can see the result of the interpolation process for each Horizon. The user can then edit the TIN by hand and include the TIN when executing the Horizons→Solids command.

The Build Solids step of the Horizons wizard

When creating a 3D mesh for a FEFLOW simulation, make sure to turn on the Prevent pinchouts (FEFLOW mesh) option. This will ensure that the mesh will contain all prism elements and that every mesh layer is continuous throughout the mesh.

The Build Mesh step of the Horizons wizard