GMS:PEST: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
Line 2: Line 2:
PEST is a general purpose parameter estimation utility developed by John Doherty of Watermark Computing. The PEST interface in GMS can be used to perform [[GMS:Automated_Parameter_Estimation|automated parameter estimation]] for MODFLOW. The steps involved in setting up a PEST run are described in the [[GMS:Automated_Parameter_Estimation|automated parameter estimation]] topic.
PEST is a general purpose parameter estimation utility developed by John Doherty of Watermark Computing. The PEST interface in GMS can be used to perform [[GMS:Automated_Parameter_Estimation|automated parameter estimation]] for MODFLOW. The steps involved in setting up a PEST run are described in the [[GMS:Automated_Parameter_Estimation|automated parameter estimation]] topic.


The PEST options are edited by selecting the '''''Parameter Estimation''''' command in the ''MODFLOW'' menu and then clicking on the PEST tab.
The PEST options are edited by selecting the '''Parameter Estimation''' command in the ''MODFLOW'' menu and then clicking on the PEST tab.
==PEST version support==
==PEST version support==
The following table shows the version of PEST supported by different versions of GMS. To see the latest released version of PEST visit http://www.pesthomepage.org/Downloads.php.
The following table shows the version of PEST supported by different versions of GMS. To see the latest released version of PEST visit http://www.pesthomepage.org/Downloads.php.

Revision as of 15:29, 22 July 2014

Calibration,
Parameters,
Stochastic Modeling
Calibration
Model Calibration
Automated Parameter Estimation
PEST Dialog
PEST
Run Options
Observations
MODFLOW-USG Observations
Plot Wizard
Calibration Targets
Parameters
Parameters
Parameter Dialog
Pilot Points
Multiplier Arrays for Parameters
Standard MODFLOW Parameters
Stochastic Modeling
Stochastic Modeling
Gaussian Field Generator
Risk Analysis Wizard
T-PROGS

PEST is a general purpose parameter estimation utility developed by John Doherty of Watermark Computing. The PEST interface in GMS can be used to perform automated parameter estimation for MODFLOW. The steps involved in setting up a PEST run are described in the automated parameter estimation topic.

The PEST options are edited by selecting the Parameter Estimation command in the MODFLOW menu and then clicking on the PEST tab.

PEST version support

The following table shows the version of PEST supported by different versions of GMS. To see the latest released version of PEST visit http://www.pesthomepage.org/Downloads.php.

GMS PEST
GMS 6.5 PEST 10.0
GMS 7.0 PEST 10.0
GMS 7.1 PEST 12.0
GMS 8.0, 8.1, 8.2 PEST 12.1
GMS 8.3, 9.0 PEST 12.2
GMS 9.1, 9.2 PEST 12.3
GMS 10.0 PEST 13.0

See also