GMS:Point Source/Sink BC (Wells)

From XMS Wiki
Revision as of 16:47, 11 May 2012 by Ksmith (talk | contribs)
Jump to navigationJump to search
FEMWATER
Meshgenc.png
Pre-processing
Building a FEMWATER Model
FEMWATER Model Input
Saving a FEMWATER Simulation
Post-processing
FEMWATER Display Options
FEMWATER Post-Processing Viewing Options
Tutorials
FEMWATER Tutorials

The Point Source/Sink BC command is used to assign a flow rate to a node. This option is typically used to assign flow rates to interior nodes to simulate injection or extraction wells. When a point source/sink is first assigned to a node, the node should be selected with the Select Nodes tool. The Point Source/Sink BC command is then selected and the Point Source/Sink BC dialog appears. Both a flow rate and a concentration may be specified at a point source/sink node. The values can be constant or transient.

Existing boundary conditions can be deleted by selecting the boundary condition with the Select Boundary Nodes, Select Boundary Faces, or Select Wells tool and selecting the Delete BC command from the FEMWATER menu.

The Select Well Tool

When a point source/sink boundary condition is applied to a node, a well symbol is placed on the node. The Select Wells tool can then be used to select the node rather than the Select Nodes tool whenever the well needs to be edited or deleted. The Select Wells tool is easier to use than the Select Nodes tool when there are a large number of nodes since it only selects nodes with point source/sink boundary conditions.