GMS:Redistribute Layers: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
 
(7 intermediate revisions by the same user not shown)
Line 6: Line 6:
*''Specify top elevation'' – Designates a constant top elevation for the grid.
*''Specify top elevation'' – Designates a constant top elevation for the grid.
*''Specify bottom elevation'' – Designates a constant bottom elevation for the grid.
*''Specify bottom elevation'' – Designates a constant bottom elevation for the grid.
The layer thickness table lists all available layers and allows editing the relative thicknesses of the grid layers. It has the following options.
If not specified, GMS will evenly distribute the layer thickness to match the new elevation values, increasing or decreasing the thickness of all layers.
*''Edit'' – Option must be checked to change the thickness of the layer.
*''Fraction'' – Changes the thickness of the layer by the percentage value entered.  


[[File:RedistributeLayers.jpg|thumb|none|left|350 px|The ''Redistribute Layers'' dialog]]
The layer thickness table lists all available layers and allows editing the relative thicknesses of each grid layer. It has the following options.
*''Edit'' – Option must be checked to change the thickness of the layer. GMS requires that at least one layer not be selected as the thickness for this layer will automatically be calculated. If multiple layers are left unselected, GMS will even distribute the remaining layer thickness between the unselected layers.
*''Fraction'' – Changes the thickness of the layer by the percentage value entered. The value needs to be a positive value between 0.01 and 0.99. GMS will automatically adjusts the fraction value of other layers so the total equals 1 (100%).
 
[[File:RedistributeLayers.png|thumb|none|left|350 px|The ''Redistribute Layers'' dialog]]


Other ways to alter grid layer thicknesses:
Other ways to alter grid layer thicknesses:
* Dragging with the [[GMS:3D_Grid_Tool_Palette|'''Select Node''']] tool.
* Dragging layer nodes with the [[GMS:3D_Grid_Tool_Palette|'''Select Node''']] tool.
* Using [[GMS:Redistribute Grid Cells|'''Redistribute Grid Cells''']] popup menu command.
* Using [[GMS:Redistribute Grid Cells|'''Redistribute Grid Cells''']] dialog to change the number of layers.




Line 21: Line 23:
[[Category:3D Grid]]
[[Category:3D Grid]]
[[Category:3D Grid Dialogs]]
[[Category:3D Grid Dialogs]]
{{stub}}
<!--Short article. Can it be merged into another article? Can it be expanded? Says what can be done in the article, but doesn't make it clear how to do that.-->

Latest revision as of 23:04, 16 January 2024

3D Grid Module
Samp mt3d.gif
3D Grid
Creating and Editing
Viewing Modes
Converting to Other Data Types
Exporting Grids
More
Display Options
Tool Palette
Cell Properties
MODFLOW Display Options
MODPATH Display Options
MT3DMS Display Options
3D Grid Commands

One way to alter 3D grid layer thicknesses is via the Redistribute Layers dialog accessed via the Grid | Redistribute Layers menu command. This dialog has two sections: one section to specify grid top and bottom elevation and another section to specify layer thickness.

The dialog can specify grid elevation with the following options:

  • Specify top elevation – Designates a constant top elevation for the grid.
  • Specify bottom elevation – Designates a constant bottom elevation for the grid.

If not specified, GMS will evenly distribute the layer thickness to match the new elevation values, increasing or decreasing the thickness of all layers.

The layer thickness table lists all available layers and allows editing the relative thicknesses of each grid layer. It has the following options.

  • Edit – Option must be checked to change the thickness of the layer. GMS requires that at least one layer not be selected as the thickness for this layer will automatically be calculated. If multiple layers are left unselected, GMS will even distribute the remaining layer thickness between the unselected layers.
  • Fraction – Changes the thickness of the layer by the percentage value entered. The value needs to be a positive value between 0.01 and 0.99. GMS will automatically adjusts the fraction value of other layers so the total equals 1 (100%).
The Redistribute Layers dialog

Other ways to alter grid layer thicknesses: