GMS:UGrid Natural Neighbor Interpolation: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 43: Line 43:
==Dialog Options==
==Dialog Options==
The options in the dialog are as follows:
The options in the dialog are as follows:
*[[GMS:Shepard's Method|Constant]] – The simplest form of inverse distance weighted interpolation. Includes the option to use classic weight function by enter a weighting exponent.
*''Nodal function''
*[[GMS:Gradient Plane Nodal Functions|Gradient Plane Nodal Functions]] – Variation of Shepard's method with nodal functions or individual functions defined at each point
**[[GMS:Shepard's Method|Constant]] – The simplest form of inverse distance weighted interpolation. Includes the option to use classic weight function by enter a weighting exponent.
*[[GMS:Quadratic Nodal Functions|Quadratic Nodal Functions]] – Makes use of quadratic polynomials to constrain nodal functions.  
**[[GMS:Gradient Plane Nodal Functions|Gradient Plane Nodal Functions]] – Variation of Shepard's method with nodal functions or individual functions defined at each point
**[[GMS:Quadratic Nodal Functions|Quadratic Nodal Functions]] – Makes use of quadratic polynomials to constrain nodal functions.  
*''Nodal function computed from''
**''Natural neighbor''
**''Closest''
**''Use all points''
*''Truncate values'' – This section allows for limiting the interpolated values to lie between the minimum and maximum value.
*''Truncate values'' – This section allows for limiting the interpolated values to lie between the minimum and maximum value.
**''Truncate to min/max of dataset'' – Limits the interpolated values to the minimum and maximum values in the original dataset.
**''Truncate to min/max of dataset'' – Limits the interpolated values to the minimum and maximum values in the original dataset.

Revision as of 18:01, 31 August 2018


The Interpolate – Natural Neighbor dialog

The basic equation used in natural neighbor interpolation is identical to the one used in IDW interpolation:

Shep eq1.jpg

As with IDW interpolation, the nodal functions can be either constants, gradient planes, or quadratics. The nodal function can be selected using the Interpolate – Natural Neighbor dialog. The difference between IDW interpolation and natural neighbor interpolation is the method used to compute the weights and the method used to select the subset of point data used for interpolation.

Natural neighbor interpolation is based on the Thiessen polygon network of the point data. The Thiessen polygon network can be constructed from the Delaunay triangulation of a set of points. A Delaunay triangulation is a network of triangles that has been constructed so that the Delaunay criterion has been satisfied.

Delaunay triangulation and corresponding Thiessen polygon network for a set points.

There is one Thiessen polygon in the network for each point. The polygon encloses the area that is closer to the enclosed point than any other point. The polygons in the interior of the points are closed polygons and the polygons on the convex hull of the points are open polygons.

Each Thiessen polygon is constructed using the circumcircles of the triangles resulting from a Delaunay triangulation of the points. The vertices of the Thiessen polygons correspond to the centroids of the circumcircles of the triangles.

Local Coordinates

The weights used in natural neighbor interpolation are based on the concept of local coordinates. Local coordinates define the "neighborliness" or amount of influence any point will have on the computed value at the interpolation location. This neighborliness is entirely dependent on the area of influence of the Thiessen polygons of the surrounding points.

To define the local coordinates for the interpolation location, Pn, the area of all Thiessen polygons in the network must be known. Temporarily inserting Pn into the network of triangles causes the corresponding Thiessen network to change, resulting in new Thiessen areas for the polygons in the neighborhood of Pn.

The concept of local coordinates is shown graphically in the following figure. Points 1-10 are data points and Pn is an interpolation location where some value associated with points 1-10 is to be interpolated. The dashed lines show the edges of the Thiessen network before Pn is temporarily inserted into triangle network and the solid lines show the edges of the Thiessen network after Pn is inserted.

Overlapping Thiessen polygon areas used in computation of local coordinates.

Only those points whose Thiessen polygons have been altered by the temporary insertion of Pn are included in the subset of points used to interpolate a value at Pn. In this case, only points 1, 4, 5, 6, & 9 are used. The local coordinate for each of these points with respect to Pn is defined as the area shared by the Thiessen polygon defined by point Pn and the Thiessen polygon defined by each point before point Pn is added. The greater the common area, the larger the resulting local coordinate, and the larger the influence or weight the point has on the interpolated value at Pn.

If defining k(n) as the Thiessen polygon area of Pn and km(n) as the difference in the Thiessen polygon area of a neighboring scatter point, Pm, before and after Pn is inserted, then the local coordinate lm(n) is defined as:

Nnlambda.jpg

The local coordinate lm(n) varies between zero and unity and is directly used as the weight, wm(n), in the interpolation equation. If Pn is at precisely the same location as Pm, then the Thiessen polygon areas for Pn and Pm are identical and lm(n) has a value of unity. In general, the greater the relative distance Pm is from Pn, the smaller its influence on the final interpolated value.

Extrapolation

As shown in the figure above, the Thiessen polygons for data points on the perimeter of the triangle network are open-ended polygons. Since such polygons have an infinite area, they cannot be used directly for natural neighbor interpolation. Thus, a special approach is used to facilitate extrapolation with the natural neighbor scheme. Prior to interpolation, the X and Y boundaries of the object being interpolated to (grid, mesh, etc.) are determined and a box is placed around the object whose boundaries exceed the limits of the object by approximately 10% (this value can be modified). Four temporary "pseudo points" are created at the four corners of the box. The inverse distance weighted interpolation scheme with gradient plane nodal functions is then used to estimate a data value at the pseudo-points. From that point on, the pseudo-points with the extrapolated values are included with the actual data points in the interpolation process. Consequently, all of the points being interpolated to are guaranteed to be within the convex hull of the data points. Once the interpolation is complete, the pseudo-points are discarded.

Dialog Options

The options in the dialog are as follows:

  • Nodal function
    • Constant – The simplest form of inverse distance weighted interpolation. Includes the option to use classic weight function by enter a weighting exponent.
    • Gradient Plane Nodal Functions – Variation of Shepard's method with nodal functions or individual functions defined at each point
    • Quadratic Nodal Functions – Makes use of quadratic polynomials to constrain nodal functions.
  • Nodal function computed from
    • Natural neighbor
    • Closest
    • Use all points
  • Truncate values – This section allows for limiting the interpolated values to lie between the minimum and maximum value.
    • Truncate to min/max of dataset – Limits the interpolated values to the minimum and maximum values in the original dataset.
    • Truncate to specified range – Allows setting a user specified minimum and maximum value range.
    • Min – Manually sets a minimum value.
    • Max – Manually sets a maximum value.
  • Advanced – This button will open the Interpolate – Advanced dialog where options for anisotropy and extrapolation can be adjusted.

Related Topics