HY8:Plastic Pipe Materials

From XMS Wiki
Revision as of 15:00, 4 October 2016 by Jcreer (talk | contribs) (Jcreer moved page HY-8:Plastic Pipe Materials to HY8:Plastic Pipe Materials)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

HY-8 7.1 has been updated to incorporate different types of plastic pipes. The following types of plastic pipes and their associated inlet configurations have been added to HY-8 7.1:


1. PVC
a. Manning’s n (From HDS-5): 0.009-0.011 (use 0.011)
b. Inlet Configurations:
i. Square Edge with Headwall
1. Notes:
a. Use HY8 Equation Number 9
b. HDS5 Chart Number 1-1
c. Equation for Concrete Pipe Square Edge with Headwall
ii. Beveled Edge (1:1)
1. Notes:
a. Use HY8 Equation Number 6
b. HDS5 Chart Number 3-A
c. Equation for Circular pipe culvert with beveled edge (1:1)
iii. Beveled Edge (1.5:1)
1. Notes:
a. Use HY8 Equation Number 7
b. HDS5 Chart Number 3-B
c. Equation for Circular pipe culvert with beveled edge (1.5:1)
iv. Mitered to Conform to Slope
1. Notes:
a. Use HY8 Equation Number 2
b. HDS5 Chart Number 2-2
c. Equation for Corrugated Metal pipe culvert, Mitered to conform to slope
2. Smooth HDPE
a. Manning’s n (From HDS-5): 0.009-0.015 (use 0.012)
b. Inlet Configurations:
i. Square Edge with Headwall
1. Notes:
a. Use HY8 Equation Number 9
b. HDS5 Chart Number 1-1
c. Equation for Concrete Pipe Square Edge with Headwall
ii. Beveled Edge (1:1)
1. Notes:
a. Use HY8 Equation Number 6
b. HDS5 Chart Number 3-A
c. Equation for Circular pipe culvert with beveled edge (1:1)
iii. Beveled Edge (1.5:1)
1. Notes:
a. Use HY8 Equation Number 7
b. HDS5 Chart Number 3-B
c. Equation for Circular pipe culvert with beveled edge (1.5:1)
iv. Thin Edge Projecting
1. Notes:
a. Use HY8 Equation Number 1
b. HDS5 Chart Number 2-3
c. Equation for Corrugated Metal pipe culvert, Thin edge projecting
v. Mitered to Conform to Slope
1. Notes:
a. Use HY8 Equation Number 2
b. HDS5 Chart Number 2-2
c. Equation for Corrugated Metal pipe culvert, Mitered to conform to slope
3. Corrugated PE
a. Manning’s n (From HDS-5): 0.009-0.015 (use 0.024)
b. Inlet Configurations:
i. Square Edge with Headwall
1. Notes:
a. Use HY8 Equation Number 3
b. HDS5 Chart Number 2-1
c. Equation for Corrugated Metal pipe culvert with Headwall
ii. Beveled Edge (1:1)
1. Notes:
a. Use HY8 Equation Number 6
b. HDS5 Chart Number 3-A
c. Equation for Circular pipe culvert with beveled edge (1:1)
iii. Beveled Edge (1.5:1)
1. Notes:
a. Use HY8 Equation Number 7
b. HDS5 Chart Number 3-B
c. Equation for Circular pipe culvert with beveled edge (1.5:1)
iv. Thin Edge Projecting
1. Notes:
a. Use HY8 Equation Number 1
b. HDS5 Chart Number 2-3
c. Equation for Corrugated Metal pipe culvert, Thin edge projecting
v. Mitered to Conform to Slope
1. Notes:
a. Use HY8 Equation Number 2
b. HDS5 Chart Number 2-2
c. Equation for Corrugated Metal pipe culvert, Mitered to conform to slope