SMS:RMA4 Material Properties

From XMS Wiki
Revision as of 18:49, 20 November 2012 by Jcreer (talk | contribs)
Jump to navigationJump to search

Diffusion

Because RMA4 does not have the ability to model turbulence, diffusion coefficients may be used to approximate turbulence. By assigning a diffusion coefficient in the x and y directions for each material, the flow over that material will be altered somewhat to provide an approximation of turbulent flow over that region. A value of -1.0 may be applied to allow normal flow over the material. Positive values provide turbulence. The higher the value, the greater the effect is.


RMA4 Material Properties dialog