GMS:3D Mesh Module: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 3: Line 3:


[[Image:Sample_FEMWATER.JPG|thumb|none|left|300 px|Isosurface of Pressure Head from a FEMWATER Simulation]]
[[Image:Sample_FEMWATER.JPG|thumb|none|left|300 px|Isosurface of Pressure Head from a FEMWATER Simulation]]
==3D Element Types==
Four types of 3D elements are supported by GMS: eight node hexahedra, six node prisms or wedges, four node tetrahedra, and five node pyramids. Hexahedra and wedges are created by projecting a 2D mesh. Tetrahedral elements are constructed with the '''Tessellate''' command or they can be created elsewhere and imported into GMS.
[[Image:ElemTypes1.png|thumb|center|275 px|Types of 3D elements supported by GMS]]


{{Navbox GMS}}
{{Navbox GMS}}

Revision as of 17:47, 6 July 2016

3D Mesh Module
Sample FEMWATER.JPG
3D Mesh
Creating a 3D Mesh
Editing a 3D Mesh
Converting 3D Meshes to Other Data Types
More
3D Mesh Display Options
3D Mesh Tool Palette
ADH Display Options
Solids to Layered Mesh
3D Mesh Commands

The 3D Mesh module is used to create and edit 3D finite element meshes. Once a mesh is constructed, the FEMWATER interface can be used to assign boundary conditions and analysis parameters and perform a FEMWATER analysis.

Isosurface of Pressure Head from a FEMWATER Simulation

3D Element Types

Four types of 3D elements are supported by GMS: eight node hexahedra, six node prisms or wedges, four node tetrahedra, and five node pyramids. Hexahedra and wedges are created by projecting a 2D mesh. Tetrahedral elements are constructed with the Tessellate command or they can be created elsewhere and imported into GMS.

Types of 3D elements supported by GMS