GMS:Converting 2D Grids
| 2D Grid Module | |
|---|---|
 | |
| 2D Grid | |
| Creating and Editing 2D Grids | |
| Converting 2D Grids | |
| More | |
| 2D Grid Display Options | |
| 2D Grid Tool Palette | |
| Cell Properties | |
| 2D Grid Commands | |
2D Grids may be converted to other types of data used in GMS, such as a TIN, 2D mesh, or 2D scatter points. 2D Grids can be converted by using the following commands in the Grid menu:
Grid → 2D Scatter Points
The Grid → 2D Scatter Points command in the Grid menu is used to create a new scatter point set using the nodes or cells of a 2D grid. A copy is made of each of the datasets associated with the grid and the datasets are associated with the new scatter point set.
Grid → TIN
A new TIN can be created from a 2D grid by selecting the Grid → TIN command from the Grid menu. Two triangles are created from each cell in the grid.
Grid → 2D Mesh
A new 2D finite element mesh can be created from a 2D grid by selecting the Grid → 2D Mesh command from the Grid menu. A four node quadrilateral element is created from each cell in the grid.
Grid → Ugrid
A new unstructured grid can be created from a 2D grid by selecting the Grid → UGrid command from the Grid menu. The new Ugrid will use the dimension of the 2D Grid.
Contours → Arcs
Creates a new feature coverage containing arcs derived from the linear contours on the 2D grid. The command only works if linear contours are being displayed.
| GMS – Groundwater Modeling System | ||
|---|---|---|
| Modules: | 2D Grid • 2D Mesh • 2D Scatter Point • 3D Grid • 3D Mesh • 3D Scatter Point • Boreholes • GIS • Map • Solid • TINs • UGrids |  |
| Models: | FEFLOW • FEMWATER • HydroGeoSphere • MODAEM • MODFLOW • MODPATH • mod-PATH3DU • MT3DMS • MT3D-USGS • PEST • PHT3D • RT3D • SEAM3D • SEAWAT • SEEP2D • T-PROGS • ZONEBUDGET | |
| Aquaveo | ||
