HY8:Crossings: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
Line 3: Line 3:


   
   
 
[[Image:HY8Crossing.jpg|thumb|none|left|400 px|Figure 1.  Multiple Crossings in a Project.]]
[[Image:HY8Crossing.jpg]]


   
   
Figure 1.  Multiple Crossings in a Project.
   
   


Revision as of 14:49, 29 April 2013

Crossings

The culvert crossing is where a collection of culverts can be placed. A crossing may consist of single or multiple culverts, and each culvert can be defined with multiple barrels. A project may contain multiple crossings, as seen in Figure 1, and each crossing may contain one or multiple culverts (Figure 2).


Figure 1. Multiple Crossings in a Project.



File:HY8image49.gif



Figure 2. One or More Culverts at a Crossing.


v • e
HY-8
Introduction:Getting Started   •   Layout   •   Vena Contracta   •   Building a Project   •   Locate Project   •   Culvert Crossing Data   •   Run Analysis   •   Report Generation
Crossing and Culvert Data:Crossings   •   Discharge Data   •   Roadway Data   •   Tailwater Data   •   Irregular Channel   •   Culvert Data   •   Site Data   •   Culvert Invert Data   •   Embankment Toe Data
AnalysisProject Units   •   Roadway Overtopping   •   Inlet Control Computations   •   Outlet Control Computations   •   Tables and Plots
Energy DissipationScour Hole Geometry   •   Increased Resistance   •   Tumbling Flow   •   USBR Type IX Baffled Apron   •   Drop Structures   •   Stilling Basins   •   Streambed Level Structures
MethodsAquatic Organism Passage   •   Low Flow Hydraulics
TroubleshootingDifferences from DOS HY-8   •   Limitations   •   HY-8 User Manual
Retrieved from "https://www.xmswiki.com/index.php?title=HY8:Crossings&oldid=48747"