HY8:Material

From XMS Wiki
Revision as of 14:54, 4 October 2016 by Jcreer (talk | contribs) (Jcreer moved page HY-8:Material to HY8:Material)
Jump to navigationJump to search

The following culvert materials are available:

  • Corrugated Steel
  • Steel Structural Plate
  • Corrugated Aluminum
  • Aluminum Structural Plate
  • Reinforced Concrete
  • PVC
  • Smooth HDPE
  • Corrugated PE


Only certain culvert materials are available for each culvert type. HY-8 assigns a default Manning's 'n' value for the selected material, but this value can be changed if desired. For more information on the plastic pipes (PVC, HDPE, and PE) please see Plastic Pipe Materials.



v • e
HY-8
Introduction:Getting Started   •   Layout   •   Vena Contracta   •   Building a Project   •   Locate Project   •   Culvert Crossing Data   •   Run Analysis   •   Report Generation
Crossing and Culvert Data:Crossings   •   Discharge Data   •   Roadway Data   •   Tailwater Data   •   Irregular Channel   •   Culvert Data   •   Site Data   •   Culvert Invert Data   •   Embankment Toe Data
AnalysisProject Units   •   Roadway Overtopping   •   Inlet Control Computations   •   Outlet Control Computations   •   Tables and Plots
Energy DissipationScour Hole Geometry   •   Increased Resistance   •   Tumbling Flow   •   USBR Type IX Baffled Apron   •   Drop Structures   •   Stilling Basins   •   Streambed Level Structures
MethodsAquatic Organism Passage   •   Low Flow Hydraulics
TroubleshootingDifferences from DOS HY-8   •   Limitations   •   HY-8 User Manual
Retrieved from "https://www.xmswiki.com/index.php?title=HY8:Material&oldid=112996"