HY8:Roadway Data: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
 
Line 10: Line 10:
The roadway elevation can be either a constant or vary with station.  An initial roadway station may be defined or left at the default of 0.0.  The stationing is used to position culverts along the length of the roadway profile when choosing the ''Front View'' option.   
The roadway elevation can be either a constant or vary with station.  An initial roadway station may be defined or left at the default of 0.0.  The stationing is used to position culverts along the length of the roadway profile when choosing the ''Front View'' option.   


The roadway surface may be paved or gravel, or an overtopping discharge coefficient in the weir equation may be entered.  Select a paved roadway surface or a gravel roadway surface from which the program uses a default weir coefficient value.  If input discharge coefficient is selected, enter a discharge coefficient between 2.5 and 3.095.   
The roadway surface may be paved or gravel or an overtopping discharge coefficient in the weir equation may be entered.  As the overtopping flow will cross the roadway surface, median, and shoulders, this discharge coefficient should take all of these materials into account.  Select a paved roadway surface or a gravel roadway surface from which the program uses a default weir coefficient value.  If input discharge coefficient is selected, enter a discharge coefficient between 2.5 and 3.095.   
   
   
The values entered for the crest length and top width of the roadway have no effect on the hydraulic computations unless overtopping occurs.
The values entered for the crest length and top width of the roadway have no effect on the hydraulic computations unless overtopping occurs.

Latest revision as of 20:38, 28 February 2018

When defining the roadway data for the culvert, the following parameters are required:

  • Roadway Profile
  • Roadway Station
  • Crest Length
  • Crest Elevation
  • Roadway Surface
  • Top Width

The roadway elevation can be either a constant or vary with station. An initial roadway station may be defined or left at the default of 0.0. The stationing is used to position culverts along the length of the roadway profile when choosing the Front View option.

The roadway surface may be paved or gravel or an overtopping discharge coefficient in the weir equation may be entered. As the overtopping flow will cross the roadway surface, median, and shoulders, this discharge coefficient should take all of these materials into account. Select a paved roadway surface or a gravel roadway surface from which the program uses a default weir coefficient value. If input discharge coefficient is selected, enter a discharge coefficient between 2.5 and 3.095.

The values entered for the crest length and top width of the roadway have no effect on the hydraulic computations unless overtopping occurs.