HY8:Tailwater Data: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
 
(5 intermediate revisions by the same user not shown)
Line 2: Line 2:
HY-8 provides the following options for calculating the tailwater rating curve downstream from a culvert crossing:
HY-8 provides the following options for calculating the tailwater rating curve downstream from a culvert crossing:


* [[HY-8:Channel Shape|Channel Shape]]
* [[HY8:Channel Shape|Channel Shape]]
* [[HY-8:Irregular Channel|Irregular Channel]]
* [[HY8:Irregular Channel|Irregular Channel]]
* [[HY-8:Rating Curve|Rating Curve]]
* [[HY8:Rating Curve|Rating Curve]]
* [[HY-8:Constant Tailwater Elevation|Constant Tailwater Elevation]]
* [[HY8:Constant Tailwater Elevation|Constant Tailwater Elevation]]
 
   
   
Uniform depth is used to represent tailwater elevations for both a defined channel shape and an irregular channel.  The cross section representing these two options should be located downstream from the culvert where normal flow is assumed to occur (downstream from channel transitions, for example).  The calculated water surface elevations are assumed to apply at the culvert outlet.
Uniform depth is used to represent tailwater elevations for both a defined channel shape and an irregular channel.  The cross section representing these two options should be located downstream from the culvert where normal flow is assumed to occur (downstream from channel transitions, for example).  The calculated water surface elevations are assumed to apply at the culvert outlet.

Latest revision as of 14:36, 4 October 2016

Tailwater Data

HY-8 provides the following options for calculating the tailwater rating curve downstream from a culvert crossing:

Uniform depth is used to represent tailwater elevations for both a defined channel shape and an irregular channel. The cross section representing these two options should be located downstream from the culvert where normal flow is assumed to occur (downstream from channel transitions, for example). The calculated water surface elevations are assumed to apply at the culvert outlet.