HY8:USBR Type IV Stilling Basin

From XMS Wiki
Revision as of 15:03, 10 October 2016 by Jcreer (talk | contribs) (Jcreer moved page HY-8:USBR Type IV Stilling Basin to HY8:USBR Type IV Stilling Basin)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

The only input variable required for this calculation is the following:

  • Basin Width

HY8image27.jpg

Variables from the figure

  • y1 — height of the chute blocks
  • h1 — width of the chute blocks
  • h4 — Height of the end sill
  • W1 — space between chute blocks
  • W2 — height of the end sill
  • LB — Length of the bottom of the basin


v • e
HY-8
Introduction:Getting Started   •   Layout   •   Vena Contracta   •   Building a Project   •   Locate Project   •   Culvert Crossing Data   •   Run Analysis   •   Report Generation
Crossing and Culvert Data:Crossings   •   Discharge Data   •   Roadway Data   •   Tailwater Data   •   Irregular Channel   •   Culvert Data   •   Site Data   •   Culvert Invert Data   •   Embankment Toe Data
AnalysisProject Units   •   Roadway Overtopping   •   Inlet Control Computations   •   Outlet Control Computations   •   Tables and Plots
Energy DissipationScour Hole Geometry   •   Increased Resistance   •   Tumbling Flow   •   USBR Type IX Baffled Apron   •   Drop Structures   •   Stilling Basins   •   Streambed Level Structures
MethodsAquatic Organism Passage   •   Low Flow Hydraulics
TroubleshootingDifferences from DOS HY-8   •   Limitations   •   HY-8 User Manual
Retrieved from "https://www.xmswiki.com/index.php?title=HY8:USBR_Type_IV_Stilling_Basin&oldid=113351"