SMS:TUFLOW Flood Impact Assessment Workflow: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
m (Protected "SMS:TUFLOW Flood Impact Assessment Workflow" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
No edit summary
 
Line 6: Line 6:
{{Navbox SMS}}
{{Navbox SMS}}


[[Category:SMS Workflows]]
[[Category:TUFLOW Workflows|Flood]]
[[Category:TUFLOW|1d]]
[[Category:TUFLOW|Flood]]

Latest revision as of 18:51, 16 September 2016

To create a flood impact assessment in a TUFLOW project, complete the following:

1. Adjust vertical geometry.
1. Create a 2D Z Lines/polygons (simple) coverage.
Create a new coverage with the TUFLOW "2D Z Lines/polygon (simple)" type.
1. Create new coverage from scratch.
  1. Select Map Data in the Project Explorer and use the New Coverage right-click command.
  2. Use the New Coverage dialog to create a new coverage by selecting the desired coverage type, and naming the coverage.
2. Create new coverage from an existing coverage.
  1. Use the Duplicate command on an existing coverage. This will copy any feature objects on the coverage.
  2. Use the Rename command to give the coverage a new name.
  3. Change the coverage type.
2. Create polygons in the site area.
1. Create enclosed arcs in the site area.
1. Create feature arcs, nodes and vertices.
In the Map module, create feature objects in the active coverage.
  1. Use the Create Feature Arc SMS Create Arc Tool.svg tool to create arcs in the map coverage.
  2. Begin creating a new arc by clicking in the Graphics Window at either arc end. If clicking on an existing feature node, vertex or arc, the new arc will snap to that object.
  3. Double-click or press the Enter key to terminate the arc.
  4. Use the Create Feature Node Create Points Tool.svg tool to create additional nodes alone or to split arcs.
2. Modify arcs.
Feature arcs often need to be edited after initial creation.
1. Create additional vertices on arcs.
  1. Use the Create Feature Vertex SMS Create Vertex Tool.svg tool to add vertices along arcs.
2. Refine the arc shape.
  1. Use the Select Feature Vertex SMS Select Vertex Tool.svg tool and the Select Feature Node SMS Select Node Tool.svg tool to move/edit existing arcs and refine the shape by dragging the nodes/vertices.
  2. Use the Select Feature Arc SMS Select Arc Tool.svg tool to move entire arcs .
3. Split arcs.
An existing arc can be split by:
1. Converting a vertex to a node.
  1. Use the Select Feature Vertex SMS Select Vertex Tool.svg tool and right-click on a vertex along an arc.
  2. Select the Convert to Node command to split the arc into two arcs.
2. Add a node the arc.
  1. Use the Create Feature Node Create Points Tool.svg tool to add a node on an arc in order to split it into two arcs.
3. Add a new connecting arc.
  1. Use the Create Feature Arc SMS Create Arc Tool.svg tool to start or end a new arc on an existing arc to split the existing arc into two arcs.
4. Use the Split Arcs Tool.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Split Arc(s)... command.
  2. Use the Split Arcs Tool to divide arcs.
5. Split overlapping arcs using the Clean Options dialog.
  1. Select overlapping arcs using the Select Feature Arc SMS Select Arc Tool.svg tool.
  2. Use the Feature Objects | Clean command to bring up the Clean Options dialog.
  3. Select the Intersect selected arcs option (for selected arcs) or Intersect arcs option (for all overlapping arcs) to split the arcs.
4. Merge arcs.
Two arcs that share an end node can be merged together.
  1. Select the shared node using the Select Feature Node SMS Select Node Tool.svg tool.
  2. Right-click on the node and select the Convert to Vertex command to merge the arcs.
  3. If desired, the Select Feature Vertex SMS Select Vertex Tool.svg tool can be used to select and delete the new vertex.
5. Smooth arcs.
The variability or roughness of an arc can be reduced.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Smooth Arc(s)... command.
  2. Use the Smooth Arcs Tool to reduce the variability of the arc.
6. Prune arcs.
Concave sections of the arc can be removed.
  1. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Prune Arc(s)... command.
  2. Use the Prune Arcs dialog to remove concave sections.
7. Extend/trim arcs.
Extend or shorten an arc to match an existing arc's length.
  1. Using the Select Feature Arc SMS Select Arc Tool.svg tool, select two intersecting arcs.
  2. Right-click on an arc using the Select Feature Arc SMS Select Arc Tool.svg tool and select the Extend/Trim Arc... command.
  3. Use the Trim/Extend Arc dialog to select the target arc and source arc.
2. Build polygons for enclosed arcs.
Polygons are not created automatically when arcs are enclosed. To create polygons:
  1. Use the Feature Objects | Build Polygons command.
3. Assign attributes in site area.
  1. Use the Select Feature Polygon SMS Select Polygon Tool.svg tool to right-click on the polygons in the site area and select the Attributes command.
  2. Assign attributes in the Polygon Elevation dialog.
  3. Use the Select Feature Arc SMS Select Arc Tool.svg tool to double-click on the arcs in the polygons in the site area.
  4. Assign attributes in the Choose Arc Type dialog.
2. Ammend 1D scheme.
  1. Go to the 1D Network coverage
  2. Using the Select Feature Point or Node SMS Select Node Tool.svg tool, double-click on nodes in the 1D network.
  3. Adjust attributes in the Node Attributes dialog, including:
    • Manually set manhole attributes in the Manhole Attributes dialog if not having manholes generated automatically.
3. Add to simulation.
  1. Drag flood coverages into simulation.