WMS:Mapping the Conceptual Model to a River Schematic: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
 
No edit summary
 
(7 intermediate revisions by one other user not shown)
Line 1: Line 1:
WMS uses a conceptual model (coverages of centerlines, and cross-sections) to define the hydraulic model, but at some point this conceptual model must be mapped to an equivalent topologic model representation for a Hydraulic model. HEC-RAS for example is defined as reaches and cross sections. Each reach and section has appropriate stationing defined from the spatial nature of the conceptual model. When choosing this command ('''Map -> 1D Schematic''' command in the '''River Tools''' menu), a schematic of the river is made for the appropriate model. The example below shows the reach (small boxes at the beginning of each reach) and section icons of the schematic for an HEC-RAS model. In the Hydraulic Modeling module the schematic is generally used as the view of the model.
WMS uses a conceptual model (coverages of centerlines, and cross sections) to define the hydraulic model, but at some point this conceptual model must be mapped to an equivalent topologic model representation for a Hydraulic model. HEC-RAS for example is defined as reaches and cross sections. Each reach and section has appropriate stationing defined from the spatial nature of the conceptual model. When choosing this command ('''Map → 1D Schematic''' command in the ''River Tools'' menu), a schematic of the river is made for the appropriate model. The example below shows the reach (small boxes at the beginning of each reach) and section icons of the schematic for an HEC-RAS model. In the Hydraulic Modeling module the schematic is generally used as the view of the model.


 
[[Image:HEC-RASsectionicon.png|350 px]]
[[Image:WMSImage295.png]]




==Related Topics==
==Related Topics==
* [[WMS:Hydraulic Modeling Introduction|Hydraulic Modeling Introduction]]
* [[WMS:Hydraulic Modeling|Hydraulic Modeling]]
* [[WMS:1D-HYD Centerline Coverage Type|1-D Hydraulic Centerline]]
* [[WMS:1D-HYD Centerline Coverage Type|1-D Hydraulic Centerline]]
* [[WMS:1D-HYD Cross-section Coverage Type|1-D Hydraulic Cross-sections]]
* [[WMS:1D-HYD Cross Section Coverage Type|1-D Hydraulic Cross Sections]]




{{WMSMain}}
{{WMSMain}}
[[Category:Hydraulic Modeling|M]]
{{stub}}

Latest revision as of 16:58, 13 June 2018

WMS uses a conceptual model (coverages of centerlines, and cross sections) to define the hydraulic model, but at some point this conceptual model must be mapped to an equivalent topologic model representation for a Hydraulic model. HEC-RAS for example is defined as reaches and cross sections. Each reach and section has appropriate stationing defined from the spatial nature of the conceptual model. When choosing this command (Map → 1D Schematic command in the River Tools menu), a schematic of the river is made for the appropriate model. The example below shows the reach (small boxes at the beginning of each reach) and section icons of the schematic for an HEC-RAS model. In the Hydraulic Modeling module the schematic is generally used as the view of the model.

HEC-RASsectionicon.png


Related Topics