WMS:Modules: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
(update image)
(update)
Line 15: Line 15:
: [[File:WMSIcon GIS Module.png]] [[WMS:GIS Module|GIS Module]]
: [[File:WMSIcon GIS Module.png]] [[WMS:GIS Module|GIS Module]]


: [[File:Icon 2Dgrid.gif]] [[WMS:2D Grid Module|2D Grid Module]]
: [[File:2D Grid Module icon.png]] [[WMS:2D Grid Module|2D Grid Module]]


: [[File:Icon 2Dscat.gif]] [[WMS:2D Scatter Point Module|2D Scatter Point Module]]
: [[File:Icon 2Dscat.gif]] [[WMS:2D Scatter Point Module|2D Scatter Point Module]]

Revision as of 01:06, 15 October 2015

The interface for WMS is divided into eight modules. A module is provided for each of the basic data types or modeling environments supported by WMS. When switching from one module to another module, the Tool Palette and the menus change. This allows a user to focus only on the tools and commands related to the data type being currently used in the modeling process. Switching from one module to another can be done instantaneously to facilitate the simultaneous use of several data types when necessary. Modules are also changed depending on the selected data folder or object in the Project Explorer.f

The following modules are supported in WMS:

WMSIcon Terrain Data Module.png Terrain Data Module
Drainage Module icon in WMS.png Drainage Module
File:WMSIcon Map Module.png Map Module
Hydrologic Modeling Module in WMS.png Hydrologic Modeling Module
Hydraulic Modeling Module icon in WMS.png Hydraulic Modeling Introduction
WMSIcon GIS Module.png GIS Module
2D Grid Module icon.png 2D Grid Module
File:Icon 2Dscat.gif 2D Scatter Point Module


Related Topics