WMS:HEC-HMS Sinks: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
 
No edit summary
Line 1: Line 1:
If you wish to run a model that is interior to a larger watershed then you can define a sink at the outlet of your a model. A sink can be defined either as a hydrograph or a constant flow rate. Sinks can only be defined at outlet points that do not have downstream reaches.
If you wish to run a model that is interior to a larger watershed then you can define a sink at the outlet of your a model. A sink can be defined either as a hydrograph or a constant flow rate. Sinks can only be defined at outlet points that do not have downstream reaches.


Before you can define a sink the HMS properties dialog you must first add the sink to the outlet. This is done using the '''[[WMS:Adding Sinks|Add->Sink]]''' command from the '''[[WMS:Building Trees|Tree]]''' menu.
Before you can define a sink the ''HMS properties'' dialog you must first add the sink to the outlet. This is done using the '''[[WMS:Adding Sinks|Add→Sink]]''' command from the ''[[WMS:Building Trees|Tree]]'' menu.





Revision as of 19:20, 8 February 2013

If you wish to run a model that is interior to a larger watershed then you can define a sink at the outlet of your a model. A sink can be defined either as a hydrograph or a constant flow rate. Sinks can only be defined at outlet points that do not have downstream reaches.

Before you can define a sink the HMS properties dialog you must first add the sink to the outlet. This is done using the Add→Sink command from the Tree menu.


Related Topics