WMS:HSPF OXRX: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
 
No edit summary
Line 1: Line 1:
This section is used to simulate the primary processes that determine the dissolved oxygen concentration in a reach or mixed reservoir. To access the OXRX Parameters dialog box, press the '''OXRX''' button in the RQUAL Parameters dialog box, explained above. The OXRX Parameters dialog box lets the user enter the parameters for the following OXRX input tables: OX-FLAGS, OX-GENPARM, ELEV, OX-BENPARM, OX-CFOREA, OX-TSIVOGLOU, OX-LEN-DELTH, OX-TCGINV, OX-REAPARM, and OX-INIT. A table may be edited by selecting it in the Table Type drop-down box; the required fields will then appear in the dialog.
This section is used to simulate the primary processes that determine the dissolved oxygen concentration in a reach or mixed reservoir. To access the ''OXRX Parameters'' dialog box, press the '''OXRX''' button in the ''RQUAL Parameters'' dialog box, explained above. The ''OXRX Parameters'' dialog box lets the user enter the parameters for the following OXRX input tables: OX-FLAGS, OX-GENPARM, ELEV, OX-BENPARM, OX-CFOREA, OX-TSIVOGLOU, OX-LEN-DELTH, OX-TCGINV, OX-REAPARM, and OX-INIT. A table may be edited by selecting it in the Table Type drop-down box; the required fields will then appear in the dialog.


The segment parameters for these tables are listed in the dialog box and the help strings include a range of values that are reasonable. The combination of required tables will vary, depending on the flags set in the OX-FLAGS table. For information on the definition and function of specific variables in this module, see Section 4.4(3).8.1 OXRX Input of the HSPF Manual.
The segment parameters for these tables are listed in the dialog box and the help strings include a range of values that are reasonable. The combination of required tables will vary, depending on the flags set in the OX-FLAGS table. For information on the definition and function of specific variables in this module, see Section 4.4(3).8.1 – OXRX Input of the HSPF Manual.[http://water.usgs.gov/software/HSPF/]





Revision as of 19:49, 18 February 2013

This section is used to simulate the primary processes that determine the dissolved oxygen concentration in a reach or mixed reservoir. To access the OXRX Parameters dialog box, press the OXRX button in the RQUAL Parameters dialog box, explained above. The OXRX Parameters dialog box lets the user enter the parameters for the following OXRX input tables: OX-FLAGS, OX-GENPARM, ELEV, OX-BENPARM, OX-CFOREA, OX-TSIVOGLOU, OX-LEN-DELTH, OX-TCGINV, OX-REAPARM, and OX-INIT. A table may be edited by selecting it in the Table Type drop-down box; the required fields will then appear in the dialog.

The segment parameters for these tables are listed in the dialog box and the help strings include a range of values that are reasonable. The combination of required tables will vary, depending on the flags set in the OX-FLAGS table. For information on the definition and function of specific variables in this module, see Section 4.4(3).8.1 – OXRX Input of the HSPF Manual.[1]


Related Topics