WMS:Mapping the Conceptual Model to a River Schematic: Difference between revisions
Line 6: | Line 6: | ||
==Related Topics== | ==Related Topics== | ||
* [[WMS:Hydraulic Modeling | * [[WMS:Hydraulic Modeling|Hydraulic Modeling]] | ||
* [[WMS:1D-HYD Centerline Coverage Type|1-D Hydraulic Centerline]] | * [[WMS:1D-HYD Centerline Coverage Type|1-D Hydraulic Centerline]] | ||
* [[WMS:1D-HYD Cross-section Coverage Type|1-D Hydraulic Cross-sections]] | * [[WMS:1D-HYD Cross-section Coverage Type|1-D Hydraulic Cross-sections]] |
Revision as of 16:06, 28 August 2014
WMS uses a conceptual model (coverages of centerlines, and cross-sections) to define the hydraulic model, but at some point this conceptual model must be mapped to an equivalent topologic model representation for a Hydraulic model. HEC-RAS for example is defined as reaches and cross sections. Each reach and section has appropriate stationing defined from the spatial nature of the conceptual model. When choosing this command (Map → 1D Schematic command in the River Tools menu), a schematic of the river is made for the appropriate model. The example below shows the reach (small boxes at the beginning of each reach) and section icons of the schematic for an HEC-RAS model. In the Hydraulic Modeling module the schematic is generally used as the view of the model.
Related Topics
WMS – Watershed Modeling System | ||
---|---|---|
Modules: | Terrain Data • Drainage • Map • Hydrologic Modeling • River • GIS • 2D Grid • 2D Scatter | |
Models: | CE-QUAL-W2 • GSSHA • HEC-1 • HEC-HMS • HEC-RAS • HSPF • MODRAT • NSS • OC Hydrograph • OC Rational • Rational • River Tools • Storm Drain • SMPDBK • SWMM • TR-20 • TR-55 | |
Toolbars: | Modules • Macros • Units • Digitize • Static Tools • Dynamic Tools • Drawing • Get Data Tools | |
Aquaveo |