SMS:Release Notes SMS: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 552: Line 552:


==SMS 11.2.5 - Release September 8, 2014==
==SMS 11.2.5 - Release September 8, 2014==
*7368 Can't Triangulate Scatter Sets
'''FESWMS'''
*7329 Bad mesh boundary from Map → 2D Mesh
*7270 FESWMS projection units not read in correctly
'''General'''
*7366 SMS doesn't read the files associated with a B2D Project quite right
*7366 SMS doesn't read the files associated with a B2D Project quite right
*7375 Zoom to selection does not function as expected
*7375 Zoom to selection does not function as expected
*7398 Merge meshes results in bad mesh
*7270 FESWMS projection units not read in correctly
*7344 SMS saves out vector dataset in two locations
*7344 SMS saves out vector dataset in two locations
*7347 Project Tree Missing Items after Reading in Project
*7347 Project Tree Missing Items after Reading in Project
*7333 Crash opening Map file
*7322 Open Project Crash
'''Generic Model'''
*7339 Command to delete a generic model definition not in 11.2
*7339 Command to delete a generic model definition not in 11.2
*7333 Crash opening Map file
'''Map'''
*7327 SMS Polygon Attributes Dimmed when they should be active
'''2D Mesh'''
*7329 Bad mesh boundary from Map → 2D Mesh
*7398 Merge meshes results in bad mesh
*7330 Can't merge meshes
'''Scatter Data'''
*7368 Can't Triangulate Scatter Sets
'''SRH-2D'''
*7338 Assigning materials from an SRH-2D materials coverage to an SRH-2D mesh allows bad option - crash
*7338 Assigning materials from an SRH-2D materials coverage to an SRH-2D mesh allows bad option - crash
*7327 SMS Polygon Attributes Dimmed when they should be active
*7337 SRH-2D time series curve file has extra lines that cause SRH-Pre to fail
*7337 SRH-2D time series curve file has extra lines that cause SRH-Pre to fail
*7322 Open Project Crash
*7330 Can't merge meshes
*7318 Dragging SRH coverage into a Map Module Folder hangs
*7318 Dragging SRH coverage into a Map Module Folder hangs



Revision as of 14:58, 1 September 2015


The SMS Intermediate Release Bugfixes page for released versions of SMS:

SMS 12.0 Release Bugfixes

SMS 12.0.6 - Release August 21, 2015

ADCIRC

  • 8207 SMS crashes when loading fort.45.

BOUSS2D

  • 8214 STWAVE mentioned in model checker description instead of BOUSS2D
  • 8191 SMS automatically cycles through time steps of BOUSS2D WSE Animation output dataset

Cartesian Grid

  • 8095 Generic CGrids are not saved with a project

GenCade

  • 8209 Inlets (Reservoir Model and Jetties) dialog typo
  • 8194 GenCade coverages lose attributes when merged

Generic Model

  • 8223 ADH Hotstart folder created when switching from ADH to Generic model

Import Options

  • 8244 Name of 'Z' dataset not correct

Mesh

  • 8229 Crash computing mesh spacing
  • 8153 Long Processing Time for Map->2D Mesh

Plots

  • 8216 Observation Profile Plot not Updating to Show the Active Timestep
  • 8196 Crash Toggling through Timesteps with Observation Profile 2D Plot

SRH-2D

  • 8171 SRH-2D Obstruction Coverage Issues
  • 8173 SRH-2D and HY8 Runaway Processes

STWAVE

  • 8201 STWAVE sim file import does not read projection

TUFLOW

  • 8210 Simple Z lines not writing to the .tgc file

WAM

  • 8114 WAM spectral site menu command Spectral Energy... doesn't work

General

  • 8208 SMS crashes when reopening the current open project.
  • 8083 PTM Waves and Breaking Input File Option cannot be removed from the model


SMS 12.0.5 - Release August 4, 2015

ADCIRC

  • 8188 SMS crashes when opening multiple files including fort.64 fort.64 and other ADCIRC files.
  • 8177 Fixed errors in ADCIRC LTEA tutorial to work with recent changes to the LTEA meshing toolbox.
  • 8104 SMS was not creating the unit 23 file even when it was set to be created.

ADH

  • 7984 Fixed issues with the sidewall boundary conditions.

BOUSS-2D

  • 8117 BOUSS-2D Generating arcs along land boundaries not using elevation scalar set.

CGWAVE

  • 8184 Unable to read in the solutions .cgo file.

General

  • 8108 Can't delete items from project.
  • 8180 Save tabular data mixing of meshes and datasets.
  • 8107 Project corrupted after saving in certain cases.
  • 8157 Delete key unresponsive when deleting arcs and other map objects.
  • 8130 Deleting datasets that are changed outside of SMS caused datasets in the project tree to be deleted
  • 8123 Removed unnecessary messages from Delete All operation.
  • 8125 Reading in a Materials file with foreign characters does not read in properly.
  • 8026 Removed unnecessary message about remote desktop from startup.

Images/GIS

  • 8164 Can't save project with DGN data.
  • 8138 MIF/MID importing errors.

Map

  • 8159 Creating arcs caused node numbering to change, and added gaps.
  • 8158 Can't find feature point by ID.
  • 8100 Incorrect Extracted Values at Observation Arcs.
  • 8033 Right-Click Menu not defined for dynamic maps.

2D-Mesh

  • 8168 Mesh generation toolbox was missing in the menu for ADCIRC.
  • 8162 Unable to deselect feature objects while multi-selecting in 2D mesh polygon properties dialogue.
  • 8152 Incorrect snap preview.
  • 8097 Mesh created with overlapping elements.
  • 8116 SMS Not exporting BC node strings correctly.
  • 8098 Crash optimizing triangulation of SMS generated mesh.
  • 8099 SMS saves bad mesh after refining elements.
  • 8091 Crash Interpolating scatter to mesh.

Scatter Data

  • 8151 Can't merge scatter sets after using to much memory.
  • 8154 Incorrect extracted plot from scatter in certain cases.

Simulations

  • 8110 Model checker sometimes doesn't recognize the mesh and materials that are in the project.

SRH-2D

  • 8186 user defined weir coefficient input boxes displayed for wrong options.
  • 8161 has no upstream/downstream arc assignment when using paired boundary.
  • 8167 Model control label is "Total Simulation Time" when it should be "Simulation End Time".
  • 8160 material display options not working as expected on SRH-2D boundary condition meshes.

TINs

  • 8137 Selecting triangles of a TIN causes SMS to crash in certain cases.

WAM

  • 8061 Model check not functioning properly.
  • 8062 Tutorial model does not run successfully.

SMS 12.0.4 - Release June 16, 2015

ADCIRC

  • 8031 Loading ADCIRC Meshes Causes Multiple Meshes with the Same Name

CMS

  • 8068 CMS Model Check and Sediment Datasets

Dynamic Model Interface

  • 7978 dataset not saved in DMI

Generic Model

  • 7991 Generic Mesh Model, can't uncheck Activate parameter group
  • 7989 Generic Mesh Model does not save parameter group correlation for BC

2D Grid

  • 7994 Display of Cartesian Grid Data is Incorrect

General

  • 8060 Scale/Printing Issue
  • 8080 Displayed snapping location is wrong when first opening the project
  • 8029 Zoom to Selection Not working when display features are turned off
  • 8067 Printing crash
  • 8025 SMS does not remember the path to the HY8 executable if the registry is already set
  • 8050 Slow vector display
  • 8048 Plot From Observation Profile Not Appearing In Graph
  • 8015 projection changes on load
  • 8041 Non-admin user with partial SMS license can't set file paths
  • 8008 Incorrect Profile Plot
  • 7834 Various issues found while working on East End Bay project
  • 7998 Reading project file hangs SMS

Images/GIS

  • 8030 Shapes→Map and can create duplicate coverage names

Map

  • 7591 Redistribute arc using source/target fails with bias distribution on source
  • 8024 Spectral coverage "Projection.." right-click menu item does nothing

2D-Mesh

  • 8079 Rectangular patch not clearing previous mesh
  • 8052 Datasets not included in Mesh→Scatter Operation
  • 8028 Saving Mesh Subsets
  • 8023 snapping elements not correct
  • 7940 BC lost when editing mesh subset
  • 7918 Z direction of multiple meshes flips

SRH-2D

  • 8032 SRH Not Outputting at Specified Interval
  • 8071 Incorrect display of SRH boundary condition labels
  • 8073 Changing one SRH-2D BC coverage changes other SRH-2D BC coverage
  • 8064 SRH-2D Model Checker Crashes
  • 8034 Time series curves linked on duplicate SRH BC coverages
  • 7461 SRH Variable WSE tutorial files don't work
  • 8016 SRH-2D Duplicate Coverage Errors
  • 7999 The SRH-2D DMI writes multiple pressure cards in srhhydro file incorrectly

STWAVE

  • 7345 Can't run STWAVE through SMS

SMS 12.0.3 - Release May 20, 2015

ADCIRC

  • 7917 Single node value not editable for ADCIRC nodal attribute

ADH

  • 7961 SMS hangs when opening ADH solution file
  • 7878 ADH materials can't be deleted

BOUSS Runup/Overtopping

  • 7942 Checkboxes in Runup/Overtopping Model Control Dialog Aren't Being Initialized

Dynamic Model Interface

  • 7978 dataset not saved in DMI

General

  • 8008 Incorrect Profile Plot
  • 7834 Various issues found while working on East End Bay project
  • 7998 Reading project file hangs SMS
  • 7963 The case of the mysterious red rectangle
  • 7951 Vertical Units Undefined
  • 7949 Crash performing Model Check
  • 7934 Unidentified Label in Node Options
  • 7938 File Import Wizard Hangs SMS

Generic Model

  • 7991 Generic Mesh Model, can't uncheck Activate parameter group
  • 7989 Generic Mesh Model does not save parameter group correlation for BC

2D Grid

  • 7994 Display of Cartesian Grid Data is Incorrect
  • 7979 Cell sizes change with reprojection

Map

  • 8024 Spectral coverage "Projection.." right-click menu item does nothing
  • 7975 Incorrect BC arc labeling
  • 7964 Crashing Stamping Feature
  • 7915 Double-Click arc group crash
  • 7933 Coverage created from scatter boundary has issues

2D Mesh

  • 8023 snapping elements not correct
  • 7918 Z direction of multiple meshes flips
  • 7940 BC lost when editing mesh subset
  • 7985 Certain BC not available when exactly two nodestrings selected
  • 7941 Crash refining elements
  • 7944 Nodal BC symbols not showing up unless the nodes are also displayed

Scatter

  • 7955 Deleting scatter point converts dataset to Z
  • 7937 Trimming a scatter set destroys the data values (only 1 dataset)

Simulation

  • 7952 Renaming Mesh doesn't update name in simulation link

SRH-2D

  • 8016 SRH-2D Duplicate Coverage Errors
  • 7999 The SRH-2D DMI writes multiple pressure cards in srhhydro file incorrectly
  • 7973 SRH BC not displayed
  • 7974 SRH Geometry Nodestrings not written correctly for SRH Model
  • 7966 SRH Project in 11.2 doesn't read correctly into 12.0
  • 7957 Opening saved SRH-2D project creates duplicate datasets.
  • 7950 Model Check for SRH says there is no mesh
  • 7889 Attempting to Open a SRH-2D Causes a Crash

STWAVE

  • 7784 STWAVE Numeric Model Crashes Midway Through Running
  • 7378 STWAVE Tutorial Crash
  • 7199 STWAVE Crash when Use time steps is specified

TUFLOW-FV

  • 7925 Can't run TUFLOW-FV from SMS
  • 7924 Can't read TUFLOW FV Vector Solution

SMS 11.2 Release Bugfixes

SMS 11.2.12 - Release August 4, 2015

ADCIRC

  • 8177 Can't run model in LTEA tutorial
  • 8104 SMS not creating unit 23 file for ADCIRC

General

  • 8188 SMS crashes when opening multiple files.
  • 8108 Can't delete items from project
  • 8107 Project corrupted after saving
  • 8130 Deleting Datasets that are changed outside of SMS
  • 8138 MIF/MID importing errors
  • 8158 Can't find feature point by ID
  • 8123 Unnecessary messages during Delete All operation
  • 8125 Reading in a Materials file with German characters does not read in the German characters.
  • 8026 When first starting SMS an annoying message about remote desktop appears

Map

  • 8168 Mesh Generation Toolbox Menu Item
  • 8159 Creating Arcs changes feature point numbering

2D Mesh

  • 8099 SMS saves bad mesh after refining elements

Scatter

  • 8151 Can't merge scatter sets
  • 8154 Incorrect extracted plot from scatter
  • 8091 Crash Interpolating Scatter to Mesh

TIN

  • 8137 Selecting triangles of a TIN causes SMS to crash

WAM

  • 8061 WAM Model Check not functioning
  • 8062 WAM Tutorial Model Does Not Run Successfully

SMS 11.2.11 - Release June 16, 2015

ADCIRC

  • 8031 Loading ADCIRC Meshes Causes Multiple Meshes with the Same Name

CMS

  • 8055 CMS-Flow model check and model wrapper errors
  • 8068 CMS Model Check and Sediment Datasets

General

  • 8060 Scale/Printing Issue
  • 8029 Zoom to Selection Not working when display features are turned off
  • 8067 Printing crash
  • 8054 SMS not writing projection card to cmcards file
  • 8050 Slow vector display
  • 8048 Plot From Observation Profile Not Appearing In Graph
  • 8015 projection changes on load
  • 8008 Incorrect Profile Plot
  • 7834 Various issues found while working on East End Bay project

Generic Model

  • 8046 Error Message Appears Stating "No Defined Boundary Condition Options Found For This Entity.
  • 7991 Generic Mesh Model, can't uncheck Activate parameter group
  • 7989 Generic Mesh Model does not save parameter group correlation for BC

2D Grid

  • 7994 Display of Cartesian Grid Data is Incorrect

Map

  • 7591 Redistribute arc using source/target fails with bias distribution on source

2D Mesh

  • 8079 Rectangular patch not clearing previous mesh
  • 8052 Datasets not included in Mesh→Scatter Operation
  • 8028 Saving Mesh Subsets
  • 7918 Z direction of multiple meshes flips

SRH-2D

  • 7468 SRH Restart File Option Not Saving
  • 8032 SRH Not Outputting at Specified Interval
  • 7461 SRH Variable WSE tutorial files don't work
  • 7977 SRH restart file location not saved

STWAVE

  • 7345 Can't run STWAVE through SMS

TUFLOW

  • 8072 Changing visibility of CGrid causes errors in TUFLOW

SMS 11.2.10 - Release May 12, 2015

ADCIRC

  • 7917 Single node value not editable for ADCIRC nodal attribute

ADH

  • 7961 SMS hangs when opening ADH solution file

BOUSS-2D

  • 7885 BOUSS2D not saving the damping grid file (may exist in 11.2 as well)

BOUSS Runup

  • 7942 Checkboxes in Runup/Overtopping Model Control Dialog Aren't Being Initialized

DMI

  • 7872 DMI output time table crashes when deleting a row

General

  • 7981 Projection not set in Reproject dialog
  • 7979 Cell sizes change with reprojection
  • 7913 SMS not reading "merged" nodes from the *.map file
  • 7910 Zoom and Pan Performance Issues
  • 7901 When ok doesn't mean ok
  • 7857 Data not saved to h5 file
  • 7854 Saving Materials Coverage as a Shapefile does not include Material names or IDs

Generic Model

  • 7991 Generic Mesh Model, can't uncheck Activate parameter group
  • 7989 Generic Mesh Model does not save parameter group correlation for BC

GIS

  • 7982 SMS Tutorial: GIS
  • 7871 Shapes → Feature Objects Does not create new coverage

2D Grid

  • 7994 Display of Cartesian Grid Data is Incorrect

2D Mesh

  • 7985 Certain BC not available when exactly two nodestrings selected
  • 7918 Z direction of multiple meshes flips
  • 7863 Merging meshes causes BC to be lost
  • 7850 SMS Hangs Merging Meshes
  • 7852 Mesh projection blocks interpolation - late

PTM

  • 7851 PTM Model wrapper update

Scatter Data

  • 7955 Deleting scatter point converts dataset to Z
  • 7937 Trimming a scatter set destroys the data values (only 1 dataset)
  • 7888 Interpolate from scatter to scatter crash

SRH-2D

  • 7977 SRH restart file location not saved
  • 7962 Specified SRH model location doesn't save
  • 7957 Opening saved SRH-2D project creates duplicate datasets.
  • 7916 PreSRH2D not running
  • 7889 Attempting to Open a SRH-2D Causes a Crash
  • 7859 SRH-2D interface deletes the contents of the HY8 file (creates a blank file) when linking

TUFLOW

  • 7925 Can't run TUFLOW-FV from SMS
  • 7924 Can't read TUFLOW FV Vector Solution

SMS 11.2.9 - Release March 13, 2015

ADCIRC

  • 7813 Crash loading ADCIRC unit 62 file

ADH

  • 7757 Pre-ADH Error with ITL and NTL
  • 7750 Can't delete initial depth folder after converting from ADH to SRH or other model

BOUSS-2D

  • 7804 Incorrect units in BOUSS2D Wavemaker
  • 7835 SMS Tutorial Error: Listboxes Lack Checkboxes in BOUSS2D Solution View Dialog
  • 7726 SMS crashes when saving, exporting, and running BOUSS2D

CAD

  • 7816 DXF→Map Crash

CMS

  • 7693 CMS Project Error and Crash

General

  • 7837 Review of help text for menu items
  • 7827 Plot Wizard with VTK Mesh Crash
  • 7805 SMS reverts to quadratic elements after using linear elements
  • 7815 Convert Observation Points to Scatter Not Available
  • 7814 Dummy Observation Points Set Incorrectly for Fort.62
  • 7795 Contour range values not initialized correctly
  • 7780 Duplicate Initial Depth Dataset
  • 7786 Project File Crashes SMS
  • 7766 Warning Window Constantly Popping Up About Contours Legend Box
  • 7752 Contour options checked and changed when they are not on - causes annoyance and slow down
  • 7723 Display of Project Explorer tree toggles not correct
  • 7729 File | Save crashes SMS
  • 7705 Gap in vector display
  • 7716 Attempting to Open .sol File Without Opening a Project First Causes SMS to Crash
  • 7623 Plot window film loop broken

Generic Model

  • 7787 11.2 - Opening 2dm File Sets the Incorrect Value for Parameter
  • 7769 Opening Project Has Issue With Generic Mesh Template
  • 7754 Default "Generic Model Definition" gets created and is in the way
  • 7753 Generic Model Coverages can become corrupted on read of "map" file.
  • 7722 Generic template not saved to new folder
  • 7687 Material Properties not saved in generic model

GIS

  • 7808 GIS to Feature Objects Wizard Closes Without Ever Going to Step 2
  • 7809 Not Selecting a Coverage type In the GIS to Feature Objects Wizard Causes a Crash

Map

  • 7781 SMS Hangs when cleaning feature objects
  • 7745 Offset arc elevation is set to 0.0
  • 7741 Merging coverages does not maintain elevation of arcs
  • 7704 Build Polygon command alters material type for some existing polygons

2D Mesh

  • 7817 Merge Mesh Crash
  • 7800 Nodestrings Not Updating Projection
  • 7751 Message about mesh being out of date is not accurate
  • 7696 Unable to delete VTK mesh dataset
  • 7548 Merging Overlapping Meshes Causes Geometry Problems

PTM

  • 7770 SMS Not Saving Particle Data Simulation

Scatter Data

  • 7740 Conversion from selected vertices to scatter points not working

Spectral Energy

  • 7768 Spectral Energy Angle Bin Size
  • 7785 SMS Doesn't Save Reference Time When Importing Spectral Data

SRH-2D

  • 7715 Model Check Not Running Before Exporting and/or Launching SRH-2D
  • 7695 Can't use Intl Feet for SRH

SMS 11.2.8 - Release January 19, 2015

CMS

  • 7656 CMS-Wave model control issues
  • 7646 Can't set number of digits for CMS-Wave date/times
  • 7644 cms flow save points cell id not correct when exporting

General

  • 7665 Units/Projection Mixed-Up
  • 7496 Dataset standard deviation is wrong
  • 7621 View is modified and the z direction flips
  • 7633 Displaying wrong mannings N value
  • 7632 Monitor points not shown
  • 7326 Freeze assigning BC
  • 7617 Display projection set funny
  • 7558 Crash Reading in BC File

Generic Model

  • 7687 Material Properties not saved in Generic Model
  • 7620 Extra "mesh" folder and 2dm file created
  • 7592 Map files with generic model data not handled correctly

2D Grid

  • 7622 Grid frames displayed double
  • 7619 Z-mag for cgrid appears wrong

Map

  • 7704 Build Polygon Command Alters Material Type for Some Existing Polygons

2D Mesh

  • 7548 Merging Overlapping Meshes Causes Geometry Problems
  • 7660 Nodestring Interal Error
  • 7645 quadratic mesh nodes aren't flagged as midside when re-loaded in Sms

Raster

  • 7618 Interpolate from Raster to Mesh Subset

RiverFlo-2D

  • 7682 SMS assigns all mesh nodes same XYZ coordinate when running RiverFlo-2D with v11.2 template
  • 7657 Can't run Generic Models RiverFlo-2D after loading solution

Scatter Data

  • 7547 Create Mesh Quality Scatter Set Popup Item Causes SMS to Crash
  • 7636 Can't save scatter file
  • 7624 Merging Scatter Sets Crash
  • 7625 Contours not updating after triangulation is changed
  • 7641 scalar value not updated
  • 7627 Scatter Merge priority lost when selecting maintain triangulation
  • 7626 Crash when merging scatter sets
  • 7635 Holes in scatter triangulation

SRH-2D

  • 7695 Can't Use Intl Feet for SRH-2D
  • 7467 Right-clicking on an SRH-2D coverage can give access to other coverage attributes

STWAVE

  • 7668 STWAVE coordinate system not written out correctly

SMS 11.2.7 - Release Novemeber 13, 2014

  • 7218 TUFLOW AD BC values don't save
  • 7377 Offset arcs function not functioning correctly
  • 7442 Extract Weir Elevations for selected nodestring crashes and is unclear as to purpose
  • 7476 Crash when double clicking in DMI coverage
  • 7477 SRH-2D *.srhmat file for a copied mesh(simulation) has no materials
  • 7481 Projection not saved for a default coverage with no data
  • 7484 SRH material properties are scrambled when building polygons
  • 7485 Bad projection after prompt to reproject
  • 7486 Rectangular Patch Crash
  • 7487 Merging meshes creates overlapping elements
  • 7493 SRH-2D (Dynamic Model) display text not changing to specified settings
  • 7497 Projection error in log when the projection should just change
  • 7509 Work in object projection function causes scatter set to disappear
  • 7517 Slow mesh merge
  • 7519 loss of boundary conditions in mesh merge
  • 7522 Crash Using Linear ↔ Quadratic on Merged Mesh
  • 7525 Generic Model BC Group Classifications not preserved
  • 7526 Model specific data saved into the Generic Model Template
  • 7527 Generic Model reuses the curves of a material type
  • 7528 switching to generic model should also prompt for model (if more than 1)
  • 7529 duplicating a generic model mesh should also duplicate its boundary conditions
  • 7530 should not allow for template deletion if it is in use by a mesh
  • 7532 Flowtrace from single timestep of a transient dataset fails to generate animation
  • 7533 Sample timesteps from a transient dataset in the Dataset Toolbox allows 0.0 time step resulting in infinite loop
  • 7538 Crash when displaying materials on a duplicated mesh in DMI
  • 7541 switch current model should always be enabled and new right-click command to create new mesh
  • 7544 Broken Mesh after Comitting or Reverting Subset with No Changes When Mesh Projection is Different from Display Projection
  • 7545 Merging Overlapping Meshes Loses Boundary Conditions
  • 7549 Generic Model Toggle writing out GP VAL wrong
  • 7550 generic model multiple material groups not working
  • 7554 SRH-2D material file is written wrong when material polygons with holes exist
  • 7557 Opening project file (.sms) gives projection messages it shouldn't
  • 7563 SMS 11.2 Crash on showing polygon fill when coverage has no materials
  • 7571 Rips occur when deleting nodes and retriangulating voids is on

SMS 11.2.6 - Release October 3, 2014

  • 7334 Incorrect Checkbox Display in Project Explorer
  • 7406 Nodestrings from Model Native Files are Corrupted
  • 7415 Unable to Interpolate between Two Nodes
  • 7407 H5 Gets Saved with Bad Connectivity
  • 7403 Merging Meshes Crash
  • 7414 Saving BOUSS2D Native Files Not WOrking for Second Simulation
  • 7444 Nodes in Mesh that lie on Boundary of a Feature Arc are Selected When Boundary is Out Flag is on
  • 7445 Unable to Read in H5 File
  • 7427 SMS files with no projection have mismatch problem
  • 7430 Mesh has odd projection
  • 7433 Reproject all Does Not Change Display Projection
  • 7428 If a New Project is Read in, The Projection is set before the old data is check on or cleared out
  • 7439 Projection not set with "extra.h5" file when it should be
  • 7332 SMS crashes when loading in TUFLOW .sup file and changing display options
  • 7458 Cannot Reproject Grid Frame In Coverage
  • 7465 The arcs of an SRH-2D Materials coverage are not displayed
  • 7437 ADCIRC File Save Error
  • 7460 Hang/Crash merging meshes
  • 7472 Reading a BOUSS2D simulation results in a bad damping cellstring
  • 7379 Simulation Icon Problem
  • 7470 Import SRHHyrdro File Doesn't Import Mannings N for Materials
  • 7471 Import SRHHydro File Has Issues with Exporting and Boundary Conditions
  • 7474 Projection issues with raster
  • 7479 Mapping GIS to Features takes hours

SMS 11.2.5 - Release September 8, 2014

FESWMS

  • 7270 FESWMS projection units not read in correctly

General

  • 7366 SMS doesn't read the files associated with a B2D Project quite right
  • 7375 Zoom to selection does not function as expected
  • 7344 SMS saves out vector dataset in two locations
  • 7347 Project Tree Missing Items after Reading in Project
  • 7333 Crash opening Map file
  • 7322 Open Project Crash

Generic Model

  • 7339 Command to delete a generic model definition not in 11.2

Map

  • 7327 SMS Polygon Attributes Dimmed when they should be active

2D Mesh

  • 7329 Bad mesh boundary from Map → 2D Mesh
  • 7398 Merge meshes results in bad mesh
  • 7330 Can't merge meshes

Scatter Data

  • 7368 Can't Triangulate Scatter Sets

SRH-2D

  • 7338 Assigning materials from an SRH-2D materials coverage to an SRH-2D mesh allows bad option - crash
  • 7337 SRH-2D time series curve file has extra lines that cause SRH-Pre to fail
  • 7318 Dragging SRH coverage into a Map Module Folder hangs

SMS 11.2.4 - Release August 13, 2014

FESWMS

  • 7271 Fixed Loading FESWMS solution corrupts ceiling dataset

General

  • 7290 FixedDiscrepancies in the Wet Area displayed in the Echo Window and the Status Bar
  • 7288 Fixed Selection Echo Window not displaying history
  • 7286 Fixed duplicate datasets after running model
  • 7280 Fixed a Time Series Issue

Map

  • 7284 Fixed creating material property coverage activates additional coverage type
  • 7325 Fixed a Crash when Editing Arc Attributes
  • 7249 Fixed a Build Polygons Failure
  • 7241 Fixed Interpolation for Map→2D Grid
  • 7266 Fixed an Issue where Scatter Contour Display was not Updating when Deleting Triangles

2D Mesh

  • 7289 Fixed Error "No mesh exists" when there is a mesh
  • 7291 Fixed Nodestring Info not showing in the Selection Echo Window
  • 7256 Fixed a Problem with Delete with all nodes selected on a Mesh
  • 7265 Fixed the Distance between mesh nodes calculator

Scatter Data

  • 7235 Fixed a Problem with Scatter Triangle and Contour Display not updating

SRH-2D

  • 7202 Fixed a problem with an SRH Error finding .dat file
  • 7212 Fixed an SRH-2d Pre fail when reading a rating curve boundary

SMS 11.2.3 - Release July 15, 2014

ADCIRC

  1. Fixed a problem where ADCIRC elevation forcing time interval

CMS

  1. Fixed a problem where CMS-WAVE Telescoping Grid were Unable to Read Vector Data

General

  1. Fixed a problem where Contour label options are always labeled as meters
  2. Fixed Unexpected End of File When Reading in Project
  3. Fixed a Resample timestep error
  4. Fixed a problem where Saving display projection in "save settings" doesn't always work
  5. Fixed a problem where Opening the same *.atcf file two times does not create distinct coverages

2D Grid

  1. Fixed Interpolating CGrid vector data to scatter

Images/GIS

  1. Fixed a problem where Static Image not linked to the project file

PTM

  1. Fixed a problem where Can't open large PTM *.h5 file

Scatter

  1. Fixed a problem where Scatter→Mesh Activity not mapped

SRH-2D

  1. Fixed SRH-2D Error in finding HDF5 file
  2. Fixed a problem where Global renumber of SRH-2D ugrid scrambles material assignments

TUFLOW

  1. Fixed a problem where TUFLOW AD BCs disappear

SMS 11.2.2 - Release June 02, 2014

This is a version release for SMS 11.2

CMS

  1. Fixed a Problem where CMS-WAVE Telescoping Grid Unable to Read Vector Data
  2. Fixed a Problem where Saving CMS-Wave Project Incomplete

General

  1. Fixed a Problem where Contour label options are always labeled as meters
  2. Fixed a Problem where Deleted disjoint nodes don't go away
  3. Fixed a Crash when Extracting datasets in the Assign BC dialog
  4. Fixed a issue where Dragging a project into SMS during start up causes problems

Images/GIS

  1. Fixed a Problem where Static Image not linked to the project file

2D Mesh

  1. Fixed a Crash when clicking 'OK' in Rectangular Patch Options
  2. Fixed a Problem where No Materials Data dialog for generic mesh elements. (11.2 32 bit)
  3. Fixed Mesh → Scatter Crash

SRH-2D

  1. Fixed a Problem where SRH-2D Error in finding HDF5 file

TUFLOW

  1. Fixed TUFLOW Active/Inactive Cell Display Confusion
  2. Fixed a Problem with cell-by-cell activity in TUFLOW

Older Bugfixes

For older versions of SMS that are no longer actively supported, see the individual bugfix articles:

Bugfix Article Release Notes
Bugfixes SMS 10.0 SMS 10.0 Intermediate Release
Bugfixes SMS 10.1 SMS 10.1 Intermediate Release
Bugfixes SMS 11.0 SMS 11.0 Intermediate Release
Bugfixes SMS 11.1 SMS 11.1 Intermediate Release

Related Topics