WMS:HSPF ATEMP

From XMS Wiki
Revision as of 20:31, 18 February 2013 by Jcreer (talk | contribs)
Jump to navigationJump to search

To access the ATEMP Parameters dialog box, press the ATEMP button in the Pervious Land Activity dialog box. The ATEMP Parameters dialog box lets the user enter the parameters for the ATEMP input table: ATEMP-DAT. Note that the dialog for ATEMP input for PERLND and IMPLND segments is the same. For information on the definition and function of specific variables in this module, see Section 4.4(1).2 – ATEMP Input of the HSPF Manual.[1]


Related Topics