WMS:Editing DEM Elevations: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
Line 29: Line 29:
A user can linearly interpolate all elevations between the first and last elevation. Some may wish to edit the first and last elevation first. Of course this will make the channel artificially smooth, but it still may be more realistic for the channel than the irregular nature of DEM elevations as a result. In this fashion a user can adjust the channel to slope to a known value.  
A user can linearly interpolate all elevations between the first and last elevation. Some may wish to edit the first and last elevation first. Of course this will make the channel artificially smooth, but it still may be more realistic for the channel than the irregular nature of DEM elevations as a result. In this fashion a user can adjust the channel to slope to a known value.  


[[Image:image79.jpg|thumb|none|left|300 px|''Edit DEM Elevations'' dialog]]
[[Image:Edit DEM Elevations Interpolate.jpg|thumb|none|left|300 px|''Edit DEM Elevations'' dialog]]


==Related Topics==
==Related Topics==

Revision as of 18:01, 23 April 2015

While DEMs are simple to use and more commonly available than TIN data, they are more difficult to edit or adjust, primarily because of the number of elevation points that must be changed in order to have a corresponding effect on the drainage characteristics of a watershed. However, there are a few things that can be done, and if kept to a reasonable amount can be powerful in using a DEM for watershed delineation, but remember that data can not be manufactured. If making numerous unexpected edits then the user may need to think about acquiring a different elevation source.

Editing Single Points

A single elevation can be edited by selecting it with the Select DEM Points WMSIcon Select DEM Points.png tool and adjusting the z value in the Edit Window, or by double-clicking and bringing up the DEM Point Attributes. Other properties such as defining a depression point or manually changing the flow direction can also be edited in the DEM Point Attributes.

Editing Elevations with a Feature Arc

The Edit Elevations command in the DEM menu is used in conjunction with a selected arc to adjust the elevations of all DEM cells that lie beneath the selected arc. Double-clicking on an arc while in the Terrain Data module will also activate the Edit DEM Elevations dialog.

File:EditDEMElevations.jpg
Edit DEM Elevations dialog

The tools at the top of the dialog can be used to select and edit individual locations along the DEM, zoom, pan, refresh, or re-center. There are three ways to edit the elevations:

Select individual DEM points and adjust the elevation

Using the Select DEM Point WMSIcon Select DEM Points.png tool in the Edit DEM Elevations dialog, a user can select a point along the arc and edit the elevation.

File:DEMpoint att.jpg
DEM Points Attributes dialog

Set/Offset all elevations by a given value

A user can set all elevations to a constant elevation, or enter an elevation to adjust all selected DEM points up (positive offset) or down (negative offset).

File:EditDEMconstant.jpg
Edit DEM Elevations dialog showing the Constant DEM elevation dialog as reached by using the Set to constant elevation button

Linearly Interpolate between first and last elevation

A user can linearly interpolate all elevations between the first and last elevation. Some may wish to edit the first and last elevation first. Of course this will make the channel artificially smooth, but it still may be more realistic for the channel than the irregular nature of DEM elevations as a result. In this fashion a user can adjust the channel to slope to a known value.

File:Edit DEM Elevations Interpolate.jpg
Edit DEM Elevations dialog

Related Topics