WMS:HEC-HMS: Difference between revisions
| Line 24: | Line 24: | ||
==HEC-1 / HEC-HMS Comparison== | ==HEC-1 / HEC-HMS Comparison== | ||
HMS includes most of the same capability as HEC-1, but has dropped some of the lesser used functions and added others. | HMS includes most of the same capability as HEC-1, but has dropped some of the lesser used functions and added others. Users can use WMS to delineate watershed data and define most parts of the HMS model. The Export HMS Basin File found in the ''HEC-1'' menu will create the input file necessary to use data derived in WMS to perform modeling in HMS. | ||
There are five different files that are (or can be) exported as part of the HMS simulation. | There are five different files that are (or can be) exported as part of the HMS simulation. | ||
| Line 32: | Line 32: | ||
# The Basin file has all of the parameters for each hydrologic unit (basin, outlet, diversion, etc.). | # The Basin file has all of the parameters for each hydrologic unit (basin, outlet, diversion, etc.). | ||
# The Precipitation file contains the information used to define the precipitation event for the simulation. | # The Precipitation file contains the information used to define the precipitation event for the simulation. | ||
# The Map file is a map or trace of the watershed and sub-basin boundaries. It is not a terrain model and therefore cannot be used to extract information such as area or runoff distance; it is only a "picture" of the watershed that is placed as a backdrop to the HMS schematic. If | # The Map file is a map or trace of the watershed and sub-basin boundaries. It is not a terrain model and therefore cannot be used to extract information such as area or runoff distance; it is only a "picture" of the watershed that is placed as a backdrop to the HMS schematic. If there is a watershed derived in WMS from a digital terrain model then the user can export it as part of the HMS project. In order to export the map it's necessary to convert it to feature objects. If creating the watershed from feature objects or a DEM then it will already be in this format. If creating the watershed from a TIN then it's necessary to use the '''Drainage Data → Feature Objects''' command found in the ''Drainage'' menu prior to exporting the HMS files. | ||
==Run Simulation== | ==Run Simulation== | ||
Revision as of 15:51, 3 September 2014
Overview
The Hydrologic Modeling System (HMS), written by the Hydrologic Engineering Center (HEC), simulates a watershed's rainfall-runoff process. It is designed to replace HEC-1, and has similar options to HEC-1, but incorporates some advances in hydrologic engineering. These advances include (1) a linear quasi-distributed runoff transform (called ModClark) for use with gridded precipitation, (2) continuous simulation capabilities with either a one-layer or more complex five-layer soil moisture method, and a parameter estimation option. HMS also incorporates a graphical user interface (GUI) for entering hydrologic data, where HEC-1 data was entered using text input files. WMS 7.1 and later versions provide tools for setting up, computing data for, and entering data for HMS models. These models can then be saved to HMS format and the model can be run in HMS. The results from these models can then be read into and viewed in WMS.
Some may wonder why a user would set up and run an HMS model in WMS when it can be done in HMS. The reason a user would do this is because WMS provides GIS, watershed modeling, and HMS parameter computation capabilities all in one place, while HMS does not provide this.
The HEC Data Storage System (DSS) is a format that was previously unsupported in WMS. Since HMS uses this format for importing and exporting time series data, WMS 7.1 and later versions now support importing and exporting DSS files, allowing for reading and writing time series data from and to HMS.
All the HMS data is entered using one of three dialogs. These dialogs are meant to correspond to the three different types of data entered in HMS: The HMS meteorologic data, the control data, and the basin data. The first dialog used in WMS is the HMS Properties dialog, shown below:
- File:WMSimage6.jpgHMS Properties dialog
The second is the HMS Meteorologic Model dialog, shown below:
- File:WMSimage7.jpgHMS Meteorologic Model dialog
The final dialog is the HMS Job Control dialog:
- File:WMSimage8.jpgHMS Job Control dialog
HEC-1 / HEC-HMS Comparison
HMS includes most of the same capability as HEC-1, but has dropped some of the lesser used functions and added others. Users can use WMS to delineate watershed data and define most parts of the HMS model. The Export HMS Basin File found in the HEC-1 menu will create the input file necessary to use data derived in WMS to perform modeling in HMS.
There are five different files that are (or can be) exported as part of the HMS simulation.
- The Project file is like the WMS super file in that it is used to keep track of the other files that make up the HMS simulation.
- The Control file includes the job control data, or simulation global parameters such as time step, number of ordinates, id cards, etc.
- The Basin file has all of the parameters for each hydrologic unit (basin, outlet, diversion, etc.).
- The Precipitation file contains the information used to define the precipitation event for the simulation.
- The Map file is a map or trace of the watershed and sub-basin boundaries. It is not a terrain model and therefore cannot be used to extract information such as area or runoff distance; it is only a "picture" of the watershed that is placed as a backdrop to the HMS schematic. If there is a watershed derived in WMS from a digital terrain model then the user can export it as part of the HMS project. In order to export the map it's necessary to convert it to feature objects. If creating the watershed from feature objects or a DEM then it will already be in this format. If creating the watershed from a TIN then it's necessary to use the Drainage Data → Feature Objects command found in the Drainage menu prior to exporting the HMS files.
Run Simulation
WMS Version 8.0 does not support running HMS simulations directly from WMS. Therefore, this menu item is dimmed. The WMS developers will support this capability in future versions or in later updates of WMS 8.0. To run a simulation, first save the HMS file from WMS. Then, start HMS and run the simulation in HMS. Finally, read the solution back into WMS by opening the HMS DSS solution file from WMS.
Saving an HMS File
Saving an HMS file is a simple task. To save an HMS file, just select the Save HMS File command from the HEC-HMS menu. Enter a file name ending in ".hms". The HMS project file and all the files (*.basin, *.control, *.map, and *.met) will be saved based on the data that has been entered in WMS.
Related Topics:
- Post Processing HMS Results
- HMS Properties Dialog
- Job Control
- Saving HEC1 Files
- Running an HEC-1 Analysis
WMS – Watershed Modeling System | ||
|---|---|---|
| Modules: | Terrain Data • Drainage • Map • Hydrologic Modeling • River • GIS • 2D Grid • 2D Scatter |  |
| Models: | CE-QUAL-W2 • GSSHA • HEC-1 • HEC-HMS • HEC-RAS • HSPF • MODRAT • NSS • OC Hydrograph • OC Rational • Rational • River Tools • Storm Drain • SMPDBK • SWMM • TR-20 • TR-55 | |
| Toolbars: | Modules • Macros • Units • Digitize • Static Tools • Dynamic Tools • Drawing • Get Data Tools | |
| Aquaveo | ||
