WMS:HEC-HMS Convert Grids

The convert grids dialog is used to manage the process of converting NEXRAD RADAR rainfall grids in XMRG or ASCII grid format to a format that is usable with WMS or HMS. This dialog is available if the Gridded Precipitation option or the User Gage Weighting option is selected in the HMS Meteorological Model dialog.

The following commands are available in this dialog:

• ASCII grid to DSS: This option converts rainfall grids in ArcInfo ASCII grid format to a gridded DSS file. The Export to directory defines the export directory and the Project name defines the DSS filename. Since the DSS file also contains date and time information, the specified Starting date and Starting time will determine the starting time of the first grid in the file list. Each additional grid will be saved to the DSS file based on the time interval specified in the HMS Job Control dialog and listed at the bottom of this dialog.
• XMRG to DSS: This command first converts XMRG grids to Arc/Info ASCII grid format, and then converts the grids to a gridded DSS file. Everything else is done in the same manner as the ASCII grid to DSS command.
• XMRG to Incremental Distribution Rain Gages: This command converts the points in an XMRG file to incremental distribution rain gages in a rain gage coverage. These gages can then be tied to a basin in a hydrologic model. When the points in the rain gage coverage are created, their coordinates are converted to the current coordinate system, if one is defined. This command will not function unless the current coordinate system is defined.
• XMRG to Total Storm Rain Gages: This command converts the points in an XMRG file to total storm rain gages in a rain gage coverage. The coordinate system of the points is converted to the current coordinate system.

Related Topics:

• Defining the Meteorological Model
• Gages
• Rain Gage Coverage