WMS:Modules

From XMS Wiki
Revision as of 15:48, 26 June 2014 by Jcreer (talk | contribs)
Jump to navigationJump to search

The interface for WMS is divided into eight modules. A module is provided for each of the basic data types or modeling environments supported by WMS. As you switch from one module to another module, the Tool Palette and the menus change. This allows you to focus only on the tools and commands related to the data type you wish to use in the modeling process. Switching from one module to another can be done instantaneously to facilitate the simultaneous use of several data types when necessary. Modules are also changed depending on the selected data folder or object in the Project Explorer.

The following modules are supported in WMS:

WMSIcon Terrain Data Module.png Terrain Data Module
File:WMSIcon Drainage Module.png Drainage Module
File:WMSIcon Map Module.png Map Module
File:WMSIcon Hydrologic Modeling Module.png Hydrologic Modeling Module
File:WMSIcon River Module.png Hydraulic Modeling Introduction
File:Icon GIS.gif GIS Module
File:Icon 2Dgrid.gif 2D Grid Module
WMSIcon 2D Scatter Point Module.png 2D Scatter Point Module


Related Topics